Dats Cool Fabrication

Dats Cool Fabrication We are a fabrication company for all sorts of performance applications

One of the tidiest hilux’s I’ve had the chance to swing spanners onThis one is a factory 3rz we had in a few months ago ...
14/06/2026

One of the tidiest hilux’s I’ve had the chance to swing spanners on

This one is a factory 3rz we had in a few months ago for a stainless 3” turbo back system, this time round we’ve done a custom front mount intercooler setup with 2.5” piping, hooked the snorkel up to the biggest airbox we could fit and a 3” intake pipe to suit 🤙🏻

Got a 4jj3 dmax or bt50 setup for towing touring?Jump on our eofy sale and get on top of those intake temps. These kits ...
11/06/2026

Got a 4jj3 dmax or bt50 setup for towing touring?
Jump on our eofy sale and get on top of those intake temps. These kits have been proven with back to back dyno testing and real world data 🤙🏻 these are also optioned with a trans cooler kit to suit

Joe’s zd gu in for a stage 2 turbo, 550 front mount intercooler, airbox, intake and a bit of exhaust work with a 4” tip...
11/06/2026

Joe’s zd gu in for a stage 2 turbo, 550 front mount intercooler, airbox, intake and a bit of exhaust work with a 4” tip at the rear. Then down to to tie everything in together and make some numbers 🤙🏻

10/06/2026

One we’ve done some work on over the years with different combo’s.

This time round swapped out the log manifold with the he221 and made a highmount 4 into 1 manifold with a m57 44mm vnt turbo, new intake, new dump pipe and new cooler pipe to suit existing our airbox and 600 front mount kit 🤙🏻 then down to the zd whisperer Evolution Tuning to work is magic

End of financial year sale, use code EOFY for a 10% discount Gu zd30/td42 front mount kits, airboxes, intakes, snorkelsB...
09/06/2026

End of financial year sale, use code EOFY for a 10% discount

Gu zd30/td42 front mount kits, airboxes, intakes, snorkels
Bt50/dmax 2021+ front mount kits, trans coolers, airboxes, intakes, snorkels, exhausts

Check out our website at www.datscoolfabrication.com.au

Now I’ve got your attention We’re looking for a N70 and N80 hilux to use for airbox, intake, snorkel, front mount cooler...
09/05/2026

Now I’ve got your attention

We’re looking for a N70 and N80 hilux to use for airbox, intake, snorkel, front mount cooler kits and potentially exhausts so we can get them jigged and put them up on the website. If you’re interested these will be discounted for allowing us to use your vehicle. Shoot through a message if you are interested 🤙🏻

M57 gu patrol in to finish off the Friday -2.5” stainless cooler pipes to the front mount-4” stainless intake pipe-3” st...
08/05/2026

M57 gu patrol in to finish off the Friday
-2.5” stainless cooler pipes to the front mount
-4” stainless intake pipe
-3” stainless turbo back system with straight pipe swap out section, split into twin 3” above the diff and then twin 4” out the back under the tray 🤙🏻

Small block Camaro in for some custom 1 3/4” ceramic coated 4 into 1 headers, stainless 3” dual with 3” quad tips tucked...
23/04/2026

Small block Camaro in for some custom 1 3/4” ceramic coated 4 into 1 headers, stainless 3” dual with 3” quad tips tucked out the guards 🤙🏻

4j swapped gu with a high mount 44 in to be finished off with the fab work. 3” stainless turbo back exhaust, 2.5” cooler...
30/03/2026

4j swapped gu with a high mount 44 in to be finished off with the fab work. 3” stainless turbo back exhaust, 2.5” cooler pipes, 4” cross over pipe and a 5” low cut seamless snorkel. Keen to see this one on the rollers at evolution in a few weeks 🤙🏻

Bt50 we did twin snorkels on last year, back in for a 3” system before heading down to evolution tuning for tickle on th...
11/03/2026

Bt50 we did twin snorkels on last year, back in for a 3” system before heading down to evolution tuning for tickle on the dyno. We have jigged the exhaust on the bt50’s and dmax’s with the4jj3’s, so we can now offer the following for a complete build on the 4jj3 platform

-front mount intercooler kit
- trans cooler
- airbox/intake pack (pie cut 3.5” intake)
-5” low cut snorkels
-dpf back 304 stainless 3” exhaust with or without muffler
-dpf delete pipe (off-road use only)

These will all be added up onto the website and available for purchase in the next few weeks, if you are wanting to order before they are up shoot through a message 🤙🏻

Address

7/37 Moroney Place Beerwah
Brisbane, QLD
4519

Opening Hours

Monday 8am - 4pm
Tuesday 8am - 4pm
Wednesday 8am - 4pm
Thursday 8am - 4pm
Friday 8am - 4pm

Telephone

+61435413574

Website

Alerts

Be the first to know and let us send you an email when Dats Cool Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Dats Cool Fabrication:

Shortcuts

Share

Category