Batchelor Autoworx

Batchelor Autoworx Motorsport wiring solutions - Protecting your investment.

My S14 has been laying dormant for a fair while now but 2026 is shaping up to be the year this finally turns some laps i...
20/12/2025

My S14 has been laying dormant for a fair while now but 2026 is shaping up to be the year this finally turns some laps in anger

Has been alot of hard work getting to this point and theres still a fair bit of work to go. Big thanks to for building a very spicy LS1 combo and all the tips and tricks to make the car reliable and capable as possible. Good plumbing and wiring is just as important

Big thanks to my family and friends whove helped me to get this far, having a young family and a bussiness whilst trying to build a descent racecar consumes a huge amount of time and patience and it has been far from easy

Stay tuned

October-November 2025Too tired/lazy for captions these days πŸ˜‚
02/12/2025

October-November 2025

Too tired/lazy for captions these days πŸ˜‚

Things have been pretty full on lately with christmas/new gear and the usual start of season rush, havent really worked ...
19/03/2025

Things have been pretty full on lately with christmas/new gear and the usual start of season rush, havent really worked on my since November and the goal was to do a lap by the end of the last year so it's finally time to set aside some hours and get the ball rolling again and make sure we do some this year.

Plumbing is one of the last major jobs to be finished so i took a few hours this week to do the engine bay side of the dry sump oil lines, breather lines and coolant lines

Our LS1 is only a few weeks away and once we have that in the bay we wont be far off getting it all wired up and ready to fire up 😁😁 Stay tuned

18/02/2025

We had Alex Batchelor come to summerise a customers subaru WRX elite 2500 install! Safe to say the car starts and runs nicely ready for tuning πŸ‘ŒπŸΌ Batchelor Autoworx

 Radical exhaust was getting a bit worse for wear, slip joints were all flogged out and leaking, the muffler packing had...
21/12/2024

Radical exhaust was getting a bit worse for wear, slip joints were all flogged out and leaking, the muffler packing had collapsed

In proper Batchelor fashion it would be a shame to spend a great deal of money on something ordinary so we made some new stainless secondaries, new stainless , a couple of vbands thrown in to bring it all together and give some modularity and finished with silver HPC to keep the heat in and the pipes shiny 😎

Back on the dyno with for a check-up post engine refresh in the new year and then straight into testing for the 2025 season, lets go

 4AGE+T AE86 wiring just about buttoned up,   Nexus R3 running the showTime to finish off the last of the plumbing, cool...
17/10/2024

4AGE+T AE86 wiring just about buttoned up, Nexus R3 running the show

Time to finish off the last of the plumbing, cooler piping and dump pipe

Motec M800 4AGE Corolla harness i finished a few weeks ago, including fuel pumps, fan and battery isolator integration
10/10/2024

Motec M800 4AGE Corolla harness i finished a few weeks ago, including fuel pumps, fan and battery isolator integration

Catching up on some social media, going way back to late last year πŸ˜‚Simple RB25 engine loom with Link G4X Fury for  , Ra...
03/07/2024

Catching up on some social media, going way back to late last year πŸ˜‚

Simple RB25 engine loom with Link G4X Fury for , Raychem spec 44 wire (Tefzel always), and HT Flame retardant braid

Been a while between posts (Typical of me), but have been incredibly busy so ill slowly catch up on a backlog of work to...
21/06/2024

Been a while between posts (Typical of me), but have been incredibly busy so ill slowly catch up on a backlog of work to show you all

Most recent is Dustins 2.2L G25 SR20 S13. Emtron KV8, DR25 in the bay, braid in the interior, keypad controlling the show via the KV8.

2024 isnt showing signs of letting up, more projects to come πŸ™‚

Exciting news!Batchelor Autoworx is now a  dealer. ECUs, PDMs, Digital dashes, keypads, sensors from LINK ECU are now av...
18/01/2024

Exciting news!

Batchelor Autoworx is now a dealer. ECUs, PDMs, Digital dashes, keypads, sensors from LINK ECU are now available through us, and what better way to start then with a build that encompasses the best of the LINK catalogue.

Crazy Twin turbo V10 R35 will be underway shortly making use of all of these products with more sensors and functions than you can poke a stick at and executed with the best wiring techniques and materials Batchelor Autoworx has to offer.

Starting 2024 off with a bang, no time to wait around, theres more than enough projects on the go.

Second post for the day πŸ˜… Big few hours on the wires and we've knocked over a fair bit of the engine loom for the Radica...
13/01/2024

Second post for the day πŸ˜… Big few hours on the wires and we've knocked over a fair bit of the engine loom for the Radical

104 wires total terminating at a 79pin autosport with nearly every cavity terminated

More batching more effiency!Paddleshifted Radical SR3 with M150/PDM30/4xLambda and every spare/expansion you think you m...
12/01/2024

More batching more effiency!

Paddleshifted Radical SR3 with M150/PDM30/4xLambda and every spare/expansion you think you might need

Address

Brisbane, QLD

Alerts

Be the first to know and let us send you an email when Batchelor Autoworx posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Batchelor Autoworx:

Share