Award Cycle

Directions Website

Award Cycle Award Cycle design, manufacture, and sell custom parts for Motorcycles.

I hand file these stainless levers for a snug fit against a NOS rear cam. Supplied raw for you to polish or paint they w...
13/10/2026

I hand file these stainless levers for a snug fit against a NOS rear cam. Supplied raw for you to polish or paint they way you want

Available now at www.awardcycle.com

NEW PART!Late model (Post 1970) triumph forks and yokes are largely unloved but not by me! Along with my offset riser b...
09/10/2026

NEW PART!
Late model (Post 1970) triumph forks and yokes are largely unloved but not by me! Along with my offset riser bushes I now also make this Dual 4.5” headlamp mount for them, making sure the headlamps don’t foul the fork tubes.

Made for my personal bike, and sold worldwide as of now.

3mm Stainless steel, laser cut and CNC bent down the road from me. Simple, Strong, Stocked UP!
09/10/2026

3mm Stainless steel, laser cut and CNC bent down the road from me. Simple, Strong, Stocked UP!

The Indian Engineering Australia team have been patient with me as I figure out the best Indian Scout/Chief linkert snap...
03/10/2026

The Indian Engineering Australia team have been patient with me as I figure out the best Indian Scout/Chief linkert snap back throttle solution that I can. There about to test this the best way……on the track!

Just like all my other snap back throttles this carries the same:
Easy Idle Adjustment
Easy Throttle Stop Adjustment
6 spring rates
Over and Underslung spring options
Left or Right cable entry
Internal or External throttles
Push or Pull Throttles

Every option covered AND if you find an option that is NOT covered, I’ll figure it out and if you test the solution for me, your first linkage is free!

I also have solutions For Harleys with Linkerts and Indians with Scheblers.

Thanks to 𝑭𝒓𝒂𝒏𝒌𝒊𝒆 ⚡️ 𝑲𝒍𝒆𝒑𝒂𝒅𝒍𝒐 and Ryder Leavitt testing these for me on their Born-Free Motorcycle Show and Biltwell Pe...
19/09/2026

Thanks to 𝑭𝒓𝒂𝒏𝒌𝒊𝒆 ⚡️ 𝑲𝒍𝒆𝒑𝒂𝒅𝒍𝒐 and Ryder Leavitt testing these for me on their Born-Free Motorcycle Show and Biltwell People’s Champ 2026 builds these are now ready for production.

As always this can take time as I’m by myself so please DM me if you are keen and let me know your carb model.

Please share if you know others that will dig it.

Heaps of other Linkert intakes also available NOW at awardcycle.com

Clockable 180 degree in 45 degree increments
Will flow up to capability of the carb
No visible screws for tip cover.

Built UP to a standard.

These have been back in stock for a while, a LOT of work goes into these to allow them to work with all Harley’s applica...
19/09/2026

These have been back in stock for a while, a LOT of work goes into these to allow them to work with all Harley’s applications that use the Linkert M series carbs.

Easy Idle Adjust
Easy WOT Adjust
6 spring options included
Will work with internal and external throttles
Will work with push throttle, and pull throttle types.
Nylon sleeves for no galling.

These are engineered to be the best with no compromise, used around the world already.

Soon to be available for Indian chiefs too

timestretch reached out to me to see if AwardCycle could solve clearance issues when using CV40’s on shovelheads. The i...
12/09/2026

timestretch reached out to me to see if AwardCycle could solve clearance issues when using CV40’s on shovelheads. The issue is that the large push/pull throttle cable bracket would foul the front head and need to be modified to fit, it’s an monstrosity of a factory bracket so I got to work and in a month or two I had whittled the design down to this!

Idle screw and Throttle stop are retained, but the cable is pulled hard close to the body and angled in the same way as my Super E/G Solution for a smooth response and better routing.

Priced to sell and online tonight there’s stock on the shelf for the working Joe.

Stock of centre and side mount cable hose clamps phase been increased so I don’t go out of stock before you need them.Tw...
12/09/2026

Stock of centre and side mount cable hose clamps phase been increased so I don’t go out of stock before you need them.

Two side mounts can be used to make one dual cable centre mount.

All supplied with M4x8mm screws, ball burnished and ready to use.

Www.awardcycle.com

The first CV40 bird deflector is done and has surpassed my expectations.-engineered not to restrict vacuum chamber flow-...
31/08/2026

The first CV40 bird deflector is done and has surpassed my expectations.

-engineered not to restrict vacuum chamber flow
-no screws visible from the front
-clockable 180 degrees in 45 degree increments!

Prototype wi be listed for sale later today.

Address

Brisbane, QLD

Website

Alerts

Be the first to know and let us send you an email when Award Cycle posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category