Wicks Wires Car audio and Fabrication

Directions Website Contact the business

Wicks Wires Car audio and Fabrication Car audio and electrical guy with a YouTube channel πŸ™‚

Jasons Ram back in for stage 463 of the install, and this time its the big one! πŸ˜… This round there are some pretty speci...
21/07/2026

Jasons Ram back in for stage 463 of the install, and this time its the big one! πŸ˜… This round there are some pretty special components going in including the Wavetch ThinPro 12's, Helix DSP Ultra S, Helix P One Mono and a pair of gorgeous Quartorigo Fantasia 1.6 6 channel amps! Quartorigo has also supplied their Corda signal cable and heads to make custom length rca's to add that extra touch, and there will be a heap of Micro Precision speaker wire to make sure everything is receiving the power with no restrictions!

I will be designing a custom copper distro block to go in, and some cool custom A-Sails to hold the Brax GL1's that were previously in the stock tweeter locations in the doors.

This is going to be EPIC!! πŸ˜πŸ‘Œ

Soundtech
Brax, Helix, Match by Audiotec Fischer

27/03/2026

The Brand new Helix DSP Ultra XT!! Its basically a baby Brax with 16 channels 😍😍

03/03/2026

Quick look at the brand new Conductor Pro! What an awesome upgrade to an already cool controller!

The Wolvorine Soarer!!This one was in the shop for quite a while getting a pretty epic upgrade! Unfortunately the previo...
07/02/2026

The Wolvorine Soarer!!

This one was in the shop for quite a while getting a pretty epic upgrade! Unfortunately the previous install was not up to Wicks standards, so almost 100 hours of audio and deadening removal, repairs to unabtainium trims and removing all of the vintage navigation equipment for the early 90's!

From here it was starting some massive fiberglass plugs for 6 12" subs to replace the back seat area, which was a small feat in itself. Possibly the largest plugs I have made to date! This was going to follow through to a full length center console capped with a matching shelf to follow the lines of the console. Then up front, a Microsoft Surface tablet was going in to run usb-c direct perfect stream to the Helix V Eight Ultimate!
Speaking of the Helix V Eight Ultimate, output of this epic DSP/ AMP combo ran to some mega custom, birch ply, sealed door pods with a pair of Helix Ci5 S200 8" midbass, Helix Ci7 5 1/4 midranges, and Helix Ci5 Tweeters! The window switches and door modules were also rewired and relocated to gain all of the space poosible for the pods, and of course a very solid helping of STP Black gold to try and keep all of that energy at bay. What an absolutely EPIC sounding set of doors! The impact out of these doors was absolutely insane, and the fact that they played well under the 50hz mark with authority, meant getting the subs to blend in was going to be virtually effortless 😁

The goal for the car was to be finished for Summernats. Unfortunately, being a one man band while continuing to service my other clients, it was not fully completed by the time it had to leave. It did make it there, and it did have audio, but I unfortunately did not get it fully completed in time.

All of the hardest ground work is now complete, and the system is now up and running! The customer has now decided that he would prefer to finish the build at home himself, so I wish him all the best and good luck for the rest of the build πŸ™‚

I really do love these Match Dsp's, such a massive difference for such a small upgrade! Even Oliver will tell you so πŸ‘‡πŸ‘‡πŸ‘‡...
09/11/2025

I really do love these Match Dsp's, such a massive difference for such a small upgrade!

Even Oliver will tell you so πŸ‘‡πŸ‘‡πŸ‘‡

Hey Everyone, Finally back again for another quick BMW video!!! Another killer peice of Match tech thanks to Soundtech, and another extemely happy client!Tha...

04/11/2025

Quick look at the new 25 X3 M50i audio system stripped apart!! This thing is built for a big system πŸ˜…

New Brax drivers on their way!! 😁😁
23/10/2025

New Brax drivers on their way!! 😁😁

The new generation of BRAX MATRIX speakers β€” ML165 PRO & ML80 PRO. Coming soon.

The happiness continues 😍😁Soundtech Brax, Helix, Match by Audiotec Fischer Stinger Australia - Australian Car Audio     ...
18/10/2025

The happiness continues 😍😁

Soundtech
Brax, Helix, Match by Audiotec Fischer
Stinger Australia - Australian Car Audio

17/10/2025

Acrylic backing is so easy with this trick!

Sometimes its the small things that make the Wick happy.. like this photo for example πŸ˜…Soundtech
17/10/2025

Sometimes its the small things that make the Wick happy.. like this photo for example πŸ˜…

Soundtech

Address

Braeside, VIC
3195

Alerts

Be the first to know and let us send you an email when Wicks Wires Car audio and Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Wicks Wires Car audio and Fabrication:

Shortcuts

Share