CQ Race Fabrication

Directions

CQ Race Fabrication Automotive fabrication service based in Boyne Island CQ. Specialising in Diffs, Chassis, Exhausts

Quick little shorten up for this Borgwarner recently.Supplying 31 spline Dutchman axles with 5/8 studs this commodore no...
07/04/2026

Quick little shorten up for this Borgwarner recently.

Supplying 31 spline Dutchman axles with 5/8 studs this commodore now runs a 15x10 3.5” BS and a 275/60 tyre 💪 keen to see this thing at the track

Latest Diff we have been working on.Recently we fabricated this 9” for Michael and his XR falcon. It is off to get dummy...
15/03/2026

Latest Diff we have been working on.

Recently we fabricated this 9” for Michael and his XR falcon. It is off to get dummy fitted into the car to check pinion angle is correct for the ride height.

With EB falcon brakes supplied by Altra 9, fabricated housing and 35 spline Dutchman axles this diff should handle what ever Michael throws at it. Looking forward to getting it back and welding it out 💪

06/02/2026

Huge Thankyou to everyone who has liked and followed our page. It really means a lot.

We have some exciting little projects coming up over the next couple months and will be sure to keep the page updated as we go.

Cheers legends. Happy weekend to all cruising and racing 🤙

Our very own XY falcon ❤️Sitting pretty on a set of 15x8x3” BS Weld Alumastar 2.0sRunning shortened 9” housing, XF rear ...
31/01/2026

Our very own XY falcon ❤️

Sitting pretty on a set of 15x8x3” BS Weld Alumastar 2.0s

Running shortened 9” housing, XF rear disc brakes 35 spline axles, strange aluminium Center, spooled with 4.11 gears, in house built twin 3.5” X Pipe exhaust, C4 and 408 Clevo tuned and freshend up by Neil at Warflow cylinder heads. It makes for the ultimate street strip weapon 💪💪

Hi Everyone, Welcome to my new page, i have created it to share with you some of the jobs i get up to on the weekends as...
31/01/2026

Hi Everyone,

Welcome to my new page, i have created it to share with you some of the jobs i get up to on the weekends as time permits between working and enjoying my own car.

This one from some time ago building our good mate Damo’s twin 3.5” X Pipe exhaust on his “Mighty GTS” 435 cube Chev powered HT Monaro.

This thing is an absolute street assassin, proven both on the track and the street.
And sounds the goods 👌

Address

Boyne Island
Boyne Island, QLD
4680

Website

Alerts

Be the first to know and let us send you an email when CQ Race Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category