TNT Fabrications - Precision Laser

TNT Fabrications - Precision Laser Aluminium | Stainless Steel | Mild Steel
Custom • Automotive • Marine • Laser Cutting

We are always happy to help fellow racers out prior to there race meetings, after all we know first hand what it feels l...
28/10/2025

We are always happy to help fellow racers out prior to there race meetings, after all we know first hand what it feels like to be still getting ready a few days out from a race weekend. Good luck this weekend lads. Enjoy and race safe - Trophy Hunters

💥💥 Full 3” Premium Stainless System for this XY Falcon 💥💥 When only the best will do drop in and see us. We will bring y...
09/08/2025

💥💥 Full 3” Premium Stainless System for this XY Falcon 💥💥 When only the best will do drop in and see us. We will bring your ideas to life 👌

Afternoon all. We are fully booked out at the moment and will be opening till 1pm daily until we have caught up. If you ...
25/06/2025

Afternoon all. We are fully booked out at the moment and will be opening till 1pm daily until we have caught up. If you reach out to Troy after 1pm please leave a msg and he will get back to you.
Thank you for your patience.

Good luck to all the Riverlanders competing in the big desert race this weekend. Go the Bannister brothers 👌 we played a...
06/06/2025

Good luck to all the Riverlanders competing in the big desert race this weekend. Go the Bannister brothers 👌 we played a very small part in laser cutting some parts for the bikes in the week heading up. Next year we will stop playing boats and definitely be up there cheering all the guys on. Have a wild ride lads and stay safe 🤟🤟🤟

We have been busy knocking out these custom Jig/Welding tables. Table Tops starting from $800 and complete tables from $...
26/03/2025

We have been busy knocking out these custom Jig/Welding tables. Table Tops starting from $800 and complete tables from $1500 all sizes available up to 3000x1500. 16mm thick. 28mm holes to suit off the shelf tooling. To top it off we can offer custom etching - rulers, business logos, names etc. get in touch with us today 👌

Januarys RPBC meeting left a couple of boats a little bit battered and bruised, both boats ending up back in the worksho...
19/03/2025

Januarys RPBC meeting left a couple of boats a little bit battered and bruised, both boats ending up back in the workshop for a tidy up. Peter’s immaculate Steven’s took “IMPACT” to the rear left hand side leaving his exhaust pipes pretty banged up. We fixed what needed fixing and straightened everything up, swapped out the collectors for some nice new ones and worked their magic on the recoat of ceramic chrome. Racing is on again this weekend and we wish Pete the best of luck 👍👍

Our boat racer friends are going to like these bad boys. Thanks to Scotty at MSC Signs for supplying us with the Evercra...
23/01/2025

Our boat racer friends are going to like these bad boys. Thanks to Scotty at MSC Signs for supplying us with the Evercraft DXF.

All Laser cut and fabricated in house, Mr. Roota’s said he wanted it big so that’s what he got 1250x1250 5mm plate.

Any of our boaty friends that would like something like this get in contact with us. From small flat pack and send to you right through to something like pictured - bigger again if required 👌

Who can’t love a set of Zoomies - especially on a boat 😍All made in house with our own laser cut stainless BBC header fl...
08/01/2025

Who can’t love a set of Zoomies - especially on a boat 😍
All made in house with our own laser cut stainless BBC header flanges and support straps 👌 Get in touch with us today with your custom ideas

Back to the machinery, this one we fabbed a big 5” system straight off the back of the turbo to un restrict the big 600h...
24/11/2024

Back to the machinery, this one we fabbed a big 5” system straight off the back of the turbo to un restrict the big 600hp Cummins engine this shredder houses. coated the whole thing to help with heat. This thing is one bad ass machine

Smashed this one out in 3 days ready for prom duties this coming week, 408ci LS in a LX Torana, it had the breath. So we...
23/11/2024

Smashed this one out in 3 days ready for prom duties this coming week, 408ci LS in a LX Torana, it had the breath. So we fabbed a full 3” system front to back using all the best goodies possible. Congrats to Tony on completing his build just in time for his lads prom. We will throw some photos up of the car once the owner has shown it off himself with his son for the first time this week.

Big week @ TNT Fab, few very happy customers taking delivery of there new modified toys, Firstly a Tractor cage complete...
23/11/2024

Big week @ TNT Fab, few very happy customers taking delivery of there new modified toys, Firstly a Tractor cage completed for the guys at Lowana Fruits, the guys said on pick up they may need to approach Mad Max and see if he needs a new ride 🤣 tomorrow we’ll drop the next project that was delivered back just this morning 👌

Aluminium breather tanks heading over to for the finial step before heading back to to be sent out with there supercha...
19/11/2024

Aluminium breather tanks heading over to for the finial step before heading back to to be sent out with there supercharger kits.

Address

10 Hughes Street
Berri, SA
5343

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+61404140262

Website

Alerts

Be the first to know and let us send you an email when TNT Fabrications - Precision Laser posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category