Jp Fabrications

29/07/2026

Busy day today building three Hilux Trutrac centres to be shipped out tomorrow

20/07/2026

Another hilux conversion all done, this one’s of to Qld and is to suit an Rx3, 30 spline billet axles with 5x114.3 and 1/2'' studs, Trutrac 4.3 centre, willwood brakes, braided hoses, new housing ubolts and lower plates finished off in Saturn black

15/07/2026

12 bolt diff out of a big block Chevelle in for some repairs and upgrades, we stripped it down, cleaned and straightened the housing, installed a new Eaton Trutrac l*d with all new bearings and seals, new motive 30 spline billet axles with studs and bearings and a new pinion yoke

13/07/2026

Another hilux conversion all ready and off to Qld, this ones to suit a Holden Gemini, 30 spline billet axles with 5x120 stud pattern and 1/2” studs, Trutrac 4.1 centre, Wilwood brakes, new brake lines and braided hoses in Saturn black
Adjustable chrome moly lower trailing arms with coil spring locator and panhard bar to suit, this also runs the torque tube replacement single ladder bar to control housing rotation

07/07/2026

Another hilux conversion ready to go to Adelaide in SA this ones to suit a Mazda 323 hatch, 30 spline billet axles with 4x114.3 pattern and 1/2” studs, Trutrac 4.3 centre, Wilwood brakes, new brake lines and braided hoses in Saturn black

06/07/2026

Another hilux conversion all done, this one’s of to New Zealand and is to suit an Rx3, 30 spline billet axles with 5x114.3 and 1/2'' studs, Trutrac 4.3 centre, willwood brakes, braided hoses, new housing ubolts and lower plates finished off in beautiful black 👌

01/07/2026

Today marks 30 years in business for Jp Fabrications, thank you to all that have supported us over this fantastic journey helping build our customers dreams, here's to the future Cheers 🙂👍

Send a message to learn more

22/06/2026

Another hilux conversion all done and off to Qld, this ones to suit a series 2 Mazda Rx7, hd housing with new laser cut bracketry and modified hilux axles with 4x110 pattern and 12mm studs, 4.1 ratio Trutrac l*d centre with new gear set and solid pinion spacer, standard s2 disc brake kit, new housing brake lines and braided caliper hoses, finished off in Saturn black,

19/06/2026

9” out of a HK T G early Holden in for some modifications, we shortened and straightened the housing and fitted a drain plug, trimmed the 31 spline axles down to the new required length and stripped down the centre and changed the gear set to a 3.89 ratio

16/06/2026

Old school 9” out of an EH Holden in for repairs and upgrades, the housing was in a sad state forcing us to retube it and bring it up to our standard, we also fitted 40mm high saddles and new billet housing ends along with a drain plug, supplied new 28 spline billet axles, fully reconditioned the factory L*D centre and fitted new strange 3.5 gear set, new master bearing kit and a solid pinion spacer, new brake drums, shoes and wheel cylinders along with new housing brake lines