Tony'z Turbo Garage

Tony'z Turbo Garage www.tonyzturbogarage.com
Tonyz turbo garage is your one stop turbo shop. Specialise in Holden V6 And LS Turbo Kits BOLT-ON and CUSTOM KITS.

21/09/2026

If you seen us at tuff streeters you would of seen this kit on display showing just how much of a direct bolt in kit we have available. No exhaust mods bolts directly to cat back systems. Cooler piping can be zero holes or just a minimal trim under headlights. No 4" hole in inner gaurds.
Photos of display engine in comments.
Easy power on a stock bottom end with low boost.

Another 1 of our early commodore ls setups ready for clean up and heat proof coating. This includes our power steering r...
11/09/2026

Another 1 of our early commodore ls setups ready for clean up and heat proof coating. This includes our power steering relocation bracket using a ve v6 pump. Retains factory alternator with plenty of clearance.

Well another week another set of manifolds done. With customer results making 500 to over 1500 hp on these manifolds lo...
08/08/2026

Well another week another set of manifolds done. With customer results making 500 to over 1500 hp on these manifolds look to
Tonyzturbogarage.com
For all your vb to vz v6 and v8 turbo needs

TIG IT THRUSDAYS Tonyzturbogarage.com Here is 1 of our vt-vz 4 into 1 turbo manifolds ready to be sent ...
30/07/2026

TIG IT THRUSDAYS

Tonyzturbogarage.com

Here is 1 of our vt-vz 4 into 1 turbo manifolds ready to be sent out this week for customer to complete crossover and drivers side setup themselves. This support some great power numbers and with there 4 into 1 long runner design. We are doing vt-vz kits next few weeks if your keen to jump on the run.

FABRICATION FRIDAY'S Tonyzturbogarage.com Another week another full fabrication of our NO holes V...
17/07/2026

FABRICATION FRIDAY'S

Tonyzturbogarage.com

Another week another full fabrication of our NO holes VN - VS LS1 LS2 LS3 full turbo kits.

With zero holes required to fit our kits it makes it super easy to install and get your project ready for the next stage.
Our kits come supplied with our zero hole dump pipe with proven results upto 700rwkw flow capabilities, also our complete zero holes intercooler piping with brackets for intercooler aswell.

Available through our website to buy directly.

Tonyzturbogarage.com

This week we have a vs v6 ecotec hot side kit plus cooler piping going out to fellow Qld'r. This kit comes with our pro ...
11/07/2026

This week we have a vs v6 ecotec hot side kit plus cooler piping going out to fellow Qld'r.
This kit comes with our pro series manifolds designed and built in house to clear all factory extras including factory a/c and pipes.
A pulsar sxe369 dual ball bearing turbo
A turbosmart wastegate
A 3.5" dump pipe with lower section read to connected to rest of exhaust.
And cooler piping consisting of a 2.5" hot side piping through a 600 x 300 cooler with 3" cold side piping.

These are available through our webpage
Tonyzturbogarage.com
as a manifold set or contact us for hot side and full kit pricing.

Another set of v6 buick pro series manifolds out the door. Next week is a full ecotec hot side kit. Awesome to be seeing...
01/07/2026

Another set of v6 buick pro series manifolds out the door.
Next week is a full ecotec hot side kit.
Awesome to be seeing some v6 builds happening.
We can build all buick v6 and ectoec v6 manifolds, hotside kits, or full kits in models
vb vc vh vk vl vn vp vq vr vs vt vx vu vy.
All our kits retain factory ac and power steer.

TWIN TURBO LS1 LS2 LS3 VT VX VU VY VZFor sale by owner Parker. Brand new never used twin turbo setup to suit vt-vz with...
16/06/2026

TWIN TURBO LS1 LS2 LS3 VT VX VU VY VZ

For sale by owner Parker.

Brand new never used twin turbo setup to suit vt-vz with factory power steering and air con.

We dont do these twin setups very often so here's the chance to grab a setup ready to be finished.

Owner is going a different direction and looking to move this setup on. Never ever been out of boxes since we sent them 3 years.

Custom manifolds we built to suit pulsar gtx3584rs mirror turbos.
2 pulsar gtx3584rs mirror turbos
2 50mm turbosmart gates.
Perfect street setup
Ready to ship
$6000

Contact Scott parker regarding sale.

ATTENTION HOLDEN VB VC VH & VK OWNERS. we are now setup to supply complete kits to suit NO HOLES. Thats correct. Zero ho...
14/06/2026

ATTENTION HOLDEN VB VC VH & VK OWNERS.

we are now setup to supply complete kits to suit NO HOLES.
Thats correct. Zero hole cut into your car. (Battery tray needs removing with is common )
Zero intercooler sticking out below.
Factory style v8 radiator fits like factory.

These kits are built to order and can do different cooler piping routing and different cooler to suit different power applications.

Dump pipe needs Zero cutting (roll rail over at rear thats all ) construction is 4" top section into a 3.5" oval pie cut section clearing left hand starter and chassis rail. Finished with a slip fit bottom section finising in 3.5" round next to gearbox.

We've had customers make almost 700rwkw on this design.

Walking around rockynats 06 and seeing our products in builds is always great. Here's a hi-torque build that we supplied...
19/04/2026

Walking around rockynats 06 and seeing our products in builds is always great.
Here's a hi-torque build that we supplied manifolds for with a weeks turn around time for the short build timeline they had on this car.

Address

Bendigo, VIC
3551

Website

Alerts

Be the first to know and let us send you an email when Tony'z Turbo Garage posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Tony'z Turbo Garage:

Shortcuts

Share

Category