Pro Engine & Design Pty Ltd

Pro Engine & Design Pty Ltd Engine reconditioners of all types of motors from standard to race professional advise with over 30 No job too small. All work is of the best quality.

Engine building and modification company with high standards of knowledge and professional services tailored to your needs.

Machining new rollover jig bush’s time to start machining up some serious Clevos
17/08/2026

Machining new rollover jig bush’s time to start machining up some serious Clevos

Hole middle nice dip .0040 on first pass cleaned up at .0080
10/06/2026

Hole middle nice dip .0040 on first pass cleaned up at .0080

10/06/2026

Subaru engine case in for a skim
Nice big dip in the middle

Final finish total .016 taken off over three cuts Little deeper than I like to go aim is .008 corrosion was just to deep
01/06/2026

Final finish total .016 taken off over three cuts
Little deeper than I like to go aim is .008 corrosion was just to deep

01/06/2026

Final Cut for ra finish on the Subaru heads

01/06/2026

Just roughing out some Subaru heads
Little corroded bit deeper than expected

Seen some s**t work over the years but these heads were bad wrong size valves to seat size and springs 15 mm to short ev...
06/05/2026

Seen some s**t work over the years but these heads were bad wrong size valves to seat size and springs 15 mm to short even guides to tight 🤦‍♂️all corrected

06/05/2026
Well done ray on the road and running sweet after machining up cyclinders and heads has given the bike a new lease of li...
01/05/2026

Well done ray on the road and running sweet after machining up cyclinders and heads has given the bike a new lease of life

Always amazes me to how big the 4v ports were on clevo s they really did go all out to try and dominate in the 60/70s ...
17/02/2026

Always amazes me to how big the 4v ports were on clevo s they really did go all out to try and dominate in the 60/70s hears 2v vs 4v

Address

73A Stud Road
Bayswater, VIC
3153

Opening Hours

Monday 8:30am - 6pm
Tuesday 8:30am - 6pm
Wednesday 8:30am - 6pm
Thursday 8:30am - 6pm
Friday 8:30am - 6pm
Saturday 8:30am - 1:30pm

Telephone

0408374675

Website

Alerts

Be the first to know and let us send you an email when Pro Engine & Design Pty Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Pro Engine & Design Pty Ltd:

Shortcuts

Share

Category