Fastnloose customs

Fastnloose customs Hand built traditional hotrods and customs built for the individual, pre 1960 American only

27/03/2026

First lil drive, not far off now

Great day with great people and lots of great cars
08/03/2026

Great day with great people and lots of great cars

Had the Willys back in over the last week doing a couple more bits, made a collapsible steering column, mounted the stee...
19/12/2025

Had the Willys back in over the last week doing a couple more bits, made a collapsible steering column, mounted the steering box etc , got some pedals mounted and brake booster fitted under the floor and a cover made for it
Can’t wait to see this one finished!

Well that’s about it for this round, very happy with how much I got done this time, doors fought me all the way but fina...
09/12/2025

Well that’s about it for this round, very happy with how much I got done this time, doors fought me all the way but finally both opening and closing, still need to fine tune the gaps but almost there, lots more steel framework in the body done, lower back corner swages in, wheel tubs made and fitted, spent a couple days on the power hammer making a roof skin inert but think it still needs a lil more crown in it yet, 34 dash modified and fitted, rear window outer frame made and fitted and made the inner section to be a wined up and made a rust repair section for the top of the front windscreen, body is now rust free, also repaired passenger side rear guard
Getting much closer to being a car again and the daughter aprooves so that’s a win!
Unfortunately this will probably be the last post for a while due to the new social media bans which I don’t plan on conforming to so if you want to get any honest ,affordable, punctual, quality work done please contact me on my phone, thank you all , take care and have a wonderful Christmas and New Year 👍

Had a little bit of time to do a bit to one off my own cars so got the d/s door fitting and lining up much better, made ...
14/11/2025

Had a little bit of time to do a bit to one off my own cars so got the d/s door fitting and lining up much better, made a door frame and gutz in it, all the door opening ‘a’an’b’ piller , top an bottom panels in and it opens and closes
Made a boot lid , put the gutter in and hinges an handle so it opens and closes and a few other lil bits n pieces, still lots to go but chipping away at it

Had to have last week off to go away with the army cadets but been back in to it this week, got the rest of the interior...
10/10/2025

Had to have last week off to go away with the army cadets but been back in to it this week, got the rest of the interior pretty much done, roof lining looks pretty flat in the pics but it definitely isn’t, it’s got a fair bit of shape to it and not an easy piece to make to get it to fit neat and then add the Dimond pleat pattern but got it done , also decked the boot out to match, lot of work but worth it , looks great

Sheet metal interior well underway
26/09/2025

Sheet metal interior well underway

Front sheet metal fixed and mounted, lil more to go on the bonnet, front and rear fitted for mock up and blew a lil colo...
19/09/2025

Front sheet metal fixed and mounted, lil more to go on the bonnet, front and rear fitted for mock up and blew a lil colour on it
Onto the alloy sheet metal interior next week

Back into it, had a couple weeks of with some back problems,Got the motor and box mounted, fire wall recessed and trans ...
12/09/2025

Back into it, had a couple weeks of with some back problems,
Got the motor and box mounted, fire wall recessed and trans tunnel made, now onto the front sheet metal

Boot floor made and fitted, rust fixed around the windscreen, body nelly done , onto the 4 guards and bonnet next
15/08/2025

Boot floor made and fitted, rust fixed around the windscreen, body nelly done , onto the 4 guards and bonnet next

Boot lid nelly done, cut off and replaced the two sides to widen it to get the gaps tighter, lots of folding and shaping...
08/08/2025

Boot lid nelly done, cut off and replaced the two sides to widen it to get the gaps tighter, lots of folding and shaping to get the correct shape for the frame, a bit more work than doing it with rhs but will look a lot neater and lighter in the end, also made new gutters for the sides and top of the opening on the body

Had a lil time off sic and a few other things going on but still been getting a bit done on this, re built door inner lo...
01/08/2025

Had a lil time off sic and a few other things going on but still been getting a bit done on this, re built door inner lower frames and lower outer skins, got the door gaps fixed up aswell, bit fiddly but looking much better, re made the driver’s side B pillar it was also rusted out and made some boot hinges and got it mounted , will replace the wooden frame in it next week and get it gapped as it has much too big a gap running down each side

Address

Barnsley, NSW
2278

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+61423238613

Website

Alerts

Be the first to know and let us send you an email when Fastnloose customs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category