Kyle's Conversions

Kyle's Conversions Building custom cars from tough 100% street legal cars to burnout cars, we do it all Supply & installation of turbo and superchargers.

Kyle's Conversions specialise in engine conversions i/e V8, 6 cylinder, 4 cylinder and diesel conversions. Gear box conversions (auto to manual & manual to auto) and Differential Conversions. Complete rear end modifications, 4 link, rear chassis clips for street or drag racing. Fabrication of custom extractors, hand fabricated manifolds & exhaust systems, turbo piping in aluminium, or stainless s

teel. Roll cages, mini tubs and general vehicle fabrication. All facets of welding i/e Mig, Tig (aluminium , stainless steel chrome moly and mild steel).

A BIT OF A SAFETY CHECK ON THE UTE, it has always been important, but now it is paramount with this thing going so fast ...
19/06/2026

A BIT OF A SAFETY CHECK ON THE UTE, it has always been important, but now it is paramount with this thing going so fast
My goal has always been to have a DRAG CAR THAT CAN DO 200 mph i know it’s a bit off 15 mph to be exact
but you need to have a goal and that’s mine
Up grading rear rims now to 15 x 15 Double bead lock just for better High speed stability

AFTER UTE RAN A BEST OF 7.51 with me getting off it the 50m short of 400 m mark First time out with new set upwe needed ...
17/06/2026

AFTER UTE RAN A BEST OF 7.51 with me getting off it the 50m short of 400 m mark
First time out with new set up
we needed ti make a few changes
Twin -12 Engine breather hoses thru new brackets that go too Dry Sump tank
-16 Return Hose from Tank to rear scavage tank and then to the atmosphere

This is to Return engine oil to Dry sump tank instead of to scavage tank, we had an issue at test day were Engine shut down as HALTECH sore a disruption in oil pressure
Thats why i use the best HALTECH

A huge thanks to Justin
BLACKTRACK PERFORMANCE FOR THE ADVISE AND SUPPORT

new brackets to hold breather hoses big thanks to T at Hydro Laser cut. located in Cardiff
15/06/2026

new brackets to hold breather hoses
big thanks to T at Hydro Laser cut. located in Cardiff

03/06/2026

UTE UPDATE

FORD 1.6 CROSSFLOW KENT MOTOR BUILT TO FORMULA FORD SPECSAnother great motor by PRYCE ENGINESHALTECH 2500EFI HARDWARE TH...
03/06/2026

FORD 1.6 CROSSFLOW KENT MOTOR BUILT TO FORMULA FORD SPECS
Another great motor by
PRYCE ENGINES
HALTECH 2500
EFI HARDWARE THROTTLE BODIES
SETH MADE INLET MANIFOLD AS WE COULDNT BUY ONE

CRAIG EFI AUTOWORKS
BLACKTRACK TO DO TUNE

03/06/2026

A great first day out in UTE with new HALTECH R5 ,PULSAR TURBO and PRP COILS
WE RAN A BEST OF 7.85 169 mph
Best part there is so much left in ute and i am still learning TO DRIVE IT
A massive thanks to the following people
The CREW
EFI AUTOWORKS
PRYCE ENGINES
AND ESPECIALLY JUSTIN
BLACKTRACK for sticking with me
He now can see the potential in the UTE

31/05/2026
30/05/2026

such a great day ute ran a best of 7.54 170 mph
can’t thank the following people enough
my crew especially Seth
Craig EFI AUTOWORKS
KEV PRYCE ENGINES
JUSTIN. BLACKTRACK PERFORMANCE

WE DID IT 7.72
30/05/2026

WE DID IT 7.72

Address

12 Sydney Street
Awaba, NSW
2283

Opening Hours

Monday 7am - 5pm
Tuesday 7am - 5pm
Wednesday 7am - 5pm
Thursday 7am - 5pm
Friday 7am - 5pm

Telephone

+61249597692

Website

Alerts

Be the first to know and let us send you an email when Kyle's Conversions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Kyle's Conversions:

Shortcuts

Share

Category