MAD Racing Engines

MAD Racing Engines Specialised Engine Building. mobile carb tuning. Cylinder Head Porting. Performance Modifications.

30/08/2026

Check 1 2

Magnum 408 went on the the dyno to check converter, to find it had 50 % converter slip another converter was fitted afte...
30/08/2026

Magnum 408 went on the the dyno to check converter, to find it had 50 % converter slip another converter was fitted after the dyno it increased boost from 3 psi to 5psi still has alot of stall speed but will do for powercruze

26/08/2026

Adrian's HG came in for an upgrade to the GM Crate engine zz502 rated at 502 hp and 567 flbs of torque it made 400 ATW ,the Hg has been fitted with a 4l80 and nine inch after driving this combo Adrian felt the cars performance lacking that's where we come in , utilising the same heads and intake but upgrading with major porting of ports and chambers and porting of intake ,MRE designed hydraulic roller cam PAC ovate spring package ,Roller rockers new carb looking forward seeing how much we can increase power by ,this is how it sounds before mods

RB 25 Torque plate bore and honed ,Mre oil system mods ,line bored decked rings gaped ,block was rusty had a derusting p...
25/08/2026

RB 25 Torque plate bore and honed ,Mre oil system mods ,line bored decked rings gaped ,block was rusty had a derusting procedure, cp pistons Spool rods acl race series bearings

Wayne and Kaylene out at Qdrc of the trailer 8.086 backed off,Kaylene made it through few rounds but but to a stop with ...
17/08/2026

Wayne and Kaylene out at Qdrc of the trailer 8.086 backed off,Kaylene made it through few rounds but but to a stop with a delaminated blower belt .MRE power💪🏻💪🏻

15/08/2026

Some Tuning on Dan's 355 check the needle on the dash,😇 second to third gear

14/08/2026

Dan's Holden 355 first start up another tuff hydralic roller combo with a manual not very common these days ,and ready for road tuning and bedding in process after re engineering the clutch system

Stephen out cruising ipswich laps in his 1000 hp plus turbo LS testing the cooling system out 💪🏻🤙🏻
11/08/2026

Stephen out cruising ipswich laps in his 1000 hp plus turbo LS testing the cooling system out 💪🏻🤙🏻

Adrian out I his big block 57 chev truck cruising out to boonah coffee and cars from the Gold Coast 🤙🏻
11/08/2026

Adrian out I his big block 57 chev truck cruising out to boonah coffee and cars from the Gold Coast 🤙🏻

Another big block Mopar 383 for Peter Clockner, block was torque plate honed,oil system mods decked crank ground ,resiz...
28/07/2026

Another big block Mopar 383 for Peter Clockner, block was torque plate honed,oil system mods decked crank ground ,resized conrods,arp rod bolts ,icon forged pistons, comp cams hydraulic roller cam new cam bearings I assembled the basic short and Pete will finish the rest ,going in his 71 superbee

Address

Aratula, QLD
4309

Opening Hours

Monday 8am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+61408426364

Website

Alerts

Be the first to know and let us send you an email when MAD Racing Engines posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category