Fiesta Division Performance

12/12/2023

Starting to see some great results with the new S290 turbo

A run up the hill from this years 2023 Willunga hillclimb in our modified MK7 Ford Fiesta ST running the new Turbo Technics S290 turbo along with our Fiesta ...

17/11/2023

More S290 testing, with some more tweaking this setup could definitely be faster, bit by bit we are working out what it needs, onto the next race!

One of our runs from this years Legend of the Lakes hillclimb in our modified MK7 Ford Fiesta ST.We finished off with a best time 55.81 placing us 8th outrig...

07/07/2023

We have had some inquiries however this package is still available, additionally included will be a generic aftermarket aluminium hotside intercooler pipe, along with some flexible water hoses.

26/05/2023

For sale a lightly used 1/1 hotside turbo kit suit Fiesta ST made up ready to go, kit has done under 2000kms and is in near new condition.

-Garrett G25-550 stainless vband rear housing
-Equal length long runner exhaust manifold wrapped with titanium heat wrap
-3.5'' 304 stainless dump pipe with flex & wastegate recirculation port
-304 stainless wastegate plumb back pipe
-304 stainless screamer pipe
-Wastegate port plug
-Silicone inlet/outlet elbows
-Turbo oil drain pipe to suit
-Rubber coolant feed/return hoses (not pictured)
-New Turbosmart Hypergate gen V 45mm wastegate (not pictured)
-Generic aftermarket aluminium hotside intercooler pipe (not pictured)

Complete one of a kind kit that only requires water/oil line plumbing to fit to your car, no other kit available has the option to plumb back the wastegate or run a screamer pipe with a simple change over, lots of time and care has gone into this setup to achieve this, we have finished our development with this kit and is now surplus to our needs.
Perfect for someone looking to make big power but keep the setup looking stealth with the turbo in its near stock location.

Comes with everything pictured plus,
(Rubber coolant feed/return hoses, Generic aftermarket aluminium hotside intercooler pipe, New Turbosmart Hypergate gen V 45mm wastegate)

Original build pictures. https://www.facebook.com/media/set/?set=a.686675493073024&type=3

Happy to post worldwide at the buyers expense.
PM for any inquiries.
$9500 AUD

21/05/2023

Check out our fastest run from last weekend’s hillclimb

A run up the hill from this years 2023 backbone hillclimb (formally mount alma) in our modified MK7 Ford Fiesta ST running our Fiesta Division Performance ne...

18/05/2023

We have available for sale a lightly used 1 of 1 hotside turbo kit made up ready to go, kit has done under 2000kms and is in near new condition.

Garrett G25-550 stainless vband rear housing, equal length long runner exhaust manifold wrapped with titanium heat wrap, 3.5'' 304 stainless dump pipe with flex & wastegate recirculation port, 304 stainless wastegate plumb back pipe, wastegate port plug, 304 stainless screamer pipe, brand new Turbosmart Hypergate gen V 45mm wastegate, silicone inlet/outlet elbows & turbo oil drain pipe to suit.

Complete one of a kind kit that only requires water/oil line plumbing to fit to your car, no other kit available has the option to plumb back the wastegate or run a screamer pipe with a simple change over, lots of time and care has gone into this setup to achieve this, we have finished our development with this kit and is now surplus to our needs.

Perfect for someone looking to make big power but keep the setup looking stealth with the turbo in its near stock location.

Happy to post worldwide at the buyers expense.
PM for any inquiries.

$9500 AUD

The next stage of our development with this platform has seen us move over to a larger Garrett G25 turbo and Turbosmart wastegate to allow us to continue to explore the capabilities of this engine.

Featuring our equal length long runner design steam pipe turbo manifold with, larger diameter runners, close to standard turbo position and ideal wastegate location for the best possible boost control with this configuration.

We have also made both recirculating wastegate return and race screamer pipe that can be changed over with ease.

We are utilizing a 3'' Aluminium intake, very similar to what is used with the OEM and hybrid turbo setups we offer for these cars.

Our objective with this setup was to keep it as compact and functional as possible while focusing on performance to make the best complete setup within our means.

12/05/2023

First hillclimb race day with the new S290 turbo is showing some promising results.

A run up the hill from this years 2023 backbone hillclimb (formally mount alma) in our modified MK7 Ford Fiesta ST running our Fiesta Division Performance ne...

09/05/2023

Now that we can finally release some details on it all..

We were lucky enough to help out with some testing on the new soon to be released Turbo Technics S290 turbo, which we were able to directly compare with their S280 and the Garrett G25-550 on a very similar setup.

Even though its early days, it looks to be a promising step up from what is an extremely well-matched turbo for these engines in the S280, if you’re looking to make a some more top end power but not give up too much response in the process this new turbo should be ideal.

We modified ours with the deletion of the IWG setup and matched it to one of our equal length exhaust manifolds.

Outright results can be seen below, on comparative boost levels the S290 holds power very close to that of the G25 up top all while coming onto boost 1000RPM sooner, on our setup the S280 would come on around 700RPM sooner than the S290 however was not capable of matching the other turbos for top end boost.

To answer a few common questions that are sure to be asked, these tests were all done with a standard engine, running on E85 fuel, using AUX fuelling and a standalone ECU

16/03/2023

**New Product Release**

3'' single piece intake pipes to suit tubular longer runner manifolds, with the growing number of people upgrading their turbo's and manifolds there was a calling for a new design of intake to suit this setup and help reduce intake temps, with most other offerings on the market not accounting for the larger turbo manifolds and either having fitment issues or sitting very close resulting in much higher intake air temps thus hindering performance, our kit solves these problems.

Send through a PM for pricing or to order one.

Full details can be found in the folder below

05/03/2023

We took the car out for a few runs at our local Roll Racing Adelaide, here is some footage from the night.

A few runs from roll racing held at The Bend Motorsport Park in South Australia, running our fiesta division performance big turbo setup with equal length tu...