19/06/2025
🛠️ Greens Mobile Auto – What We’ve Been Up To! 🚗
It’s been a little while between posts — but that’s only because we’ve been flat out! Here’s a quick update on a few of the jobs we’ve had on recently:
🔧 12HT 60 Series LandCruiser Rebuild
This one came in with a blown head gasket, so we stripped it down and gave it a full top-end rebuild. While the head was off getting reconditioned by Rick Corbett Engines, we inspected and prepped the block to make sure everything was spot-on. It’s now back together and running beautifully — the owner couldn’t be happier! We’ll catch up with it again in about 1000km for a valve clearance reset.
🚐 Work Van Troubles – Limp Mode Drama
Our own van decided to chuck a tantrum and kept going into limp mode. Originally we suspected a failing injector, but after some digging, it turned out to be a dodgy old wiring repair — someone had attempted to connect wiring to the connector pins but it wasnt a solid connection. Safe to say it wasn’t the right fix. We’ve now sorted it properly and the van’s back doing what it should.
⚡ AU SOHC Turbo Falcon – Barra ECU & Loom Build
We’ve also been working on a Barra ECU swap into an AU Falcon SOHC turbo setup, using one of our custom body looms. The customer was having issues with throttle response — after checking over the wiring, we found some incorrect connections and that the ECU had only had security removed with no other setup done.
We’ve since written a fresh start-up tune from scratch (still new to tuning but constantly learning and training!), and we’re getting good pedal response now. Next steps are setting up fuel pump and fan triggers, converting it to FG coils, and tidying up a few other bits of wiring before it gets sent off for a dyno tune.
🧰 Barra Standalone Looms & Website Launch
Alongside all this, we’re continuing to build our standalone Barra looms, and we’ve officially launched our website! If you’re chasing Barra wiring, check it out and get in touch:
👉 greensbarrasolutions.com
Big thanks as always to our customers for your continued support — we appreciate every bit of it 🙌