Mectric Motorsport Electronics

16/11/2025

📣MTC16 Pre-orders available NOW!
🔥15% off during the Black Friday sale!
✅Multi-clutch transmissions (eg: the ZF 8HP range).
✅DCT transmissions (eg: Nissan GR6, BMW GS7, VW DSG).
✅Fully customizable CAN Bus for integration with any capable ECU.
✅Seamless integration with Emtron ECU's.
Initial stock is limited, secure yours early! Shipping April 2026.

https://mectricmse.com/products/mtc16

16/11/2025

🔥Black Friday Sale is on NOW!🔥
15% off everything, including MTC16 pre-orders!

04/11/2025

Introducing the Mectric MTC16, an advanced transmission controller designed to directly control the most advanced modern transmissions. The MTC16's hardware features 16 proportional current solenoids drivers, specifically designed to drive the variable force solenoids found in automotive transmissions. We have partnered with Emtron Australia to ensure the MTC16 integrates seamlessly with Emtron ECU's with fully torque modelled gearshift control and downshift rev-matching.

Overview
• Dual 650MHz Processors
• Compatible with 12 and 24 Volt systems
• 16x Low Side Proportional Current Solenoid Outputs
• 8x Half-Bridge Auxiliary Outputs
• 4x Protected Solenoid Power Supply Outputs
• 4x Analogue Outputs
• 16x Analogue Inputs
• 16x Digital Inputs
• 4x 2 Wire Hall Effect Speed Inputs
• IMU (3 Axis Accelerometer & Gyroscope)
• 8 GB Data Logging Memory
• 2x CAN 2.0A/B Busses
• 1x RS232 Interface
• Ethernet Communications

Applications
• Dual Clutch Transmission Control (Nissan GR6, BMW GS7, VW DSG)
• Multi-Clutch Automatic Transmission Control (ZF 8HP)
• Conventional Automatic Transmission Control

Pre-orders will be available later this month, with units due to start shipping in April 2026.

https://mectricmse.com/products/mtc16

04/12/2024

Last Chance!

26/11/2024

The ultimate ECU bundle for your RB, SR, JZ, 4G, or any inline engine is here! The new Emtron Shadow 8 plus an ELC1 single channel lambda controller. This combo provides an unmatched level of engine control at an insane price.
Available during the Black Friday Period for only $2244.
V Engine Bundle (with ELC2) only $2,337.
mectricmse.com/collections/bundles

High end motorsport electronics powertrain control power distribution

24/11/2024

Check out the Emtron bargains at mectricmse.com 😁

In 2013 Emtron Australia created a range of high end engine management systems for a market requiring additional power and flexibility. The company aim is to provide the latest electronic component architecture and ensure only the best performance.

21/11/2024

🔥Black Friday deals are available NOW!🔥
Including our new CAN Vehicle Integration Controller as well as the entire existing and new release Emtron ECU and Display range.

Need help choosing the best combinations for your project? Just reach out with any questions and we can point you in the right direction.
🛒 https://mectricmse.com/

High end motorsport electronics powertrain control power distribution

15/11/2024

Our good friends at World have just announced the release of some new exiting products and they're available for pre-order now at discounted Black Friday Sale prices!
Head to mectricmse.com for 15% off the Emtron range until December 3rd. Discounts automatically applied in checkout.
The Shadow 8 ECU ships by December 31st 2024.
The ED7 & ED7M Dashes ship by March 31st 2025.

Not only are Emtron our engine management partner of choice but we fully supply and support their range are as well as providing high end calibration and tuning services for them.

Check out the new and existing Emtron Products here:
https://mectricmse.com/collections/emtron-australia

25/06/2024

Now's the time to grab a bargain and delete some relays in your next project with
10% off uPDM4 Power Distribution Modules until June 30th (Online orders only).
- 4 Outputs
- 5 Inputs
- Fully customisable CAN Bus
- Designed and manufactured in Australia

High end motorsport electronics powertrain control power distribution

18/05/2024

uPDM4 In Stock!

While this powerful little device has been unavailable due to component supply shortages, we took the opportunity to give it a few updates.

Hardware improvements include:
- Switchable pullups on all input pins.
- Voltage measurement on all input pins.
- Improved unloaded current draw (now 21mA).

New Firmware Features:
- Improve user defined CAN data sets.
- Added extremely powerful math expression parsing engine to generate custom channels from a user defined expression string. Normal math operators, bitwise operations, logic and predefined function calls can be used to generate an almost limitless potential of channel values.
- Greatly improved the ease of working with multiple uPDM4's on the same CAN bus.
- Updated bootloader to allow easy in-field firmware updates while still connected to a busy CAN bus, and even when other uPDM4's are present.

More details here:
https://mectricmse.com/blogs/news/updm4-in-stock

20/03/2023

If you enjoy a fairly tech heavy discussion then this one is for you! Feat Ben, Nick & myself.

Episode 7 of ‘The Emtron Podcast’ is now live for anyone wanting to fill their minds with all things engine management innovation.

Find it where you get your podcasts from or, follow this link.

https://sites.libsyn.com/416384