20/05/2026
ECU CONTINENTAL SID 605
Instalada en motor Wiechai P170 euro 3
Máquina Sinomach 936
La ecu ingresó al laboratorio con falta de disparo en el@control de los inyectores .
Luego de un arduo trabajo de ingeniería inversa , logramos realizar un mapeo completo del circuito de control y encontramos la falla en la placa .
Reparamos y los resultados están a la vista .
Máquina en marcha , disparando , con modulación de válvula e inyectores .
Gracias a por el desarrollo , próximamente el sistema será incluido en futuras actualizaciones del fullprob .
*Aclaracion : motor 6 cilindros , se está probando solamente con 4 .
INYESOFT ELECTRÓNICA AUTOMOTRIZ .
Servicio de asesoramiento y asistencia técnica a colegas mecánicos / electricistas .
Agustin Alvarez 5797 esq. Dr Manuel Argerich , Del Viso , Bs As .-
Tel : 011 15 59622682
Horarios de atención : Lunes a Viernes de 09:00 a 17:00
-——————————————————————————————————-
Continental SID 605 ECU
Installed on a Wiechai P170 Euro 3 engine
Sinomach 936
The ECU arrived at the lab with a problem with the injector control system firing.
After extensive reverse engineering, we were able to perform a complete mapping of the control circuit and located the fault on the circuit board.
We repaired it, and the results speak for themselves.
The engine is running, firing, with valve and injector modulation.
Thanks to for the development; the system will be included in future updates of the fullprob tool.
*Note: This is a 6-cylinder engine, but it is currently being tested with a 4-cylinder engine.
INYESOFT AUTOMOTIVE ELECTRONICS
Consulting and technical assistance services for fellow mechanics and electricians.
Agustin Alvarez 5797, corner of Dr. Manuel Argerich, Del Viso, Buenos Aires.
Tel: 011 15 59622682
Business Hours: Monday to Friday, 9:00 AM to 5:00 PM