BitBox & BitEdit

16/09/2026

We have added support of Motion SE07 ECUs used on various brands of Chinese-made motor vehicles in module China Motion Moto/Extreme.

Check out all info at modules page: https://bitsoftware.com/bitbox/catalog/99

11/09/2026

We have added support of Yeson 28D-96 (can be labeled as MT05.B) ECUs used on various brands of Chinese-made motor vehicles in our new module China Yeson Moto/Extreme.

Check out all info at modules page: https://bitsoftware.com/bitbox/catalog/102

08/09/2026

We have added support of Bosch MG1/MD1 2020+ control units based on NXP SPC5777 MCU for petrol and diesel BMW and Mini vehicles in our module Bosch MG1/MD1 Gen2 BENCH [SM2/SM3 ONLY].

https://bitsoftware.com/bitbox/catalog/101

07/09/2026

Programmer’s Day Sale from 7 to 13 September 2026!
Get 15% OFF all BitBox and BitEdit modules*.

Don’t miss the deal! Check the offer at:
User Portal: https://bitsoftware.com/portal/new
Our website: https://bitsoftware.com
Official dealers: https://bitsoftware.com/bitedit/contacts

*The discount does not apply to credits, full sets, or other special offers.

04/09/2026

We have added support of petrol Chinesse vehicles with Bosch PDCU8.0 ECUs based on MCU Aurix TC389 in module Bosch MG1/MD1 BENCH [SM2/SM3 ONLY].

https://bitsoftware.com/bitbox/catalog/58

26/08/2026

Still summer! Still motobikes!

We have added support for Magneti Marelli 11RZ ECUs based on Aurix TC277 MCUs used in Moto Morini X-CAPE 1200 bike in our ultimate module Magneti Marelli BENCH-CAN.

https://bitsoftware.com/bitbox/catalog/89

19/08/2026

Watch BitBox working with BMW & Mini Bosch MG1/MD1 2020+ ECUs. No ECU opening and no unlock required.
Just BENCH connection.

Watch the video:

This solution supports BMW & Mini Bosch MG1/MD1 Gen2 ECUs (2020+), ...

14/08/2026

We have added support of Bosch MG1/MD1 2020+ control units for petrol and diesel BMW and Mini vehicles in our new module Bosch MG1/MD1 Gen2 BENCH [SM2/SM3 ONLY].

Supported ECU types:

• MD1CS001
• MD1CP032
• MG1CS024
• MG1CS049
• MG1CS201

No ECU opening, no any unlock needed. Just use BENCH connection.

https://bitsoftware.com/bitbox/catalog/101

12/08/2026

We have added support of Valeo V46.13, V46.32 and V46.52 control units for petrol PSA vehicles in module PSA Petrol CAN.

https://bitsoftware.com/bitbox/catalog/72

09/08/2026

We have added support of Bosch EDC17C62 control units for diesel Chinese vehicles in module Bosch MEDC17 Bench [SM2/SM3 ONLY].

https://bitsoftware.com/bitbox/catalog/81