FORUP Light Industry CO.,LTD

23/04/2025

Come and join us at Taipei AMPA show
Booth J0529

24/06/2024

Knowledge about Automotive and Motorcycle PMMA Light lens

Knowledge about Automotive and Motorcycle PMMA Light Housings - INFO - FORUP Light Industry Co., Ltd.

21/06/2024

Knowledge about Automotive and Motorcycle PC Light Lens

Knowledge about Automotive and Motorcycle PC Light Lens - INFO - FORUP Light Industry Co., Ltd.

19/04/2024

Last day of AMPA SHOW!
Wish you were here

17/04/2024

Here we go today 🔥🔥

16/04/2024

See ya tomorrow 🎉

09/04/2024

Join us at the 2024 Taipei AMPA Show and immerse yourself in the latest advancements and trends shaping the future of the automotive industry.
FORUP look forward to welcoming you and exploring potential opportunities for collaboration.

07/02/2024

FORUP LIGHT Wish you have a great Lunar new year

Please be informed that FORUP will be closed from 8th to 14th Feb(start work at 15th)for Lunar New Year.
The mail will still be checked during holidays so don’t be hesistate to drop us mail if necessary to [email protected].
Wish you have wonderful and plentiful Dragon year!

09/11/2023

Here we are. Festival once of a year.

07/11/2023

The digits indicate conformity with the conditions summarized in the tables below. The digit 0 is used where no protection is provided. The digit is replaced with the letter X when insufficient data has been gathered to assign a protection level. The device can become less capable, however it cannot become unsafe.

Protection against solid objects
0 – No protection/ No test required
1 – Protected against objects greater than 50mm diameter
2 – Protected against objects greater than 12.5mm diameter, such as a finger
3 – Protected against objects greater than 2.5mm
4 – Protected against objects greater than 1.0mm such as wire
5 – Ingress of dust is not totally prevented but dust does not enter in harmful quantities to interfere with the correct operation or impair safety
6 – No ingress of dust permitted

Protection against water
0 – No protection / No test required
1 – Protected against falling drops of water
2 – Protected against drops falling at 15° in 4 fixed positions
3 – Low pressure spray – similar to shower head at up to 60° from vertical tested using an oscillating tube with an arc of 60° for ten minutes
4 – Low pressure spray – similar to shower head – as per numeral 3 but 180° for 10 minutes
5 – Medium pressure jet – 6.3mm diameter, similar to garden hose – from any angle for 3 minutes at a distance of 2.5-3 metres.
6 – High pressure jet – 12.5mm diameter, similar to fire hose – from any angle for 3 minutes at a distance of 2.5-3 meters.
7 – Immersion – for temporary immersion in water under set conditions – 1 metre for 30 minutes
8 – Protected against the effects of continuous immersion in water, ingress of water in quantities causing harmful effects shall not be possible. Conditions should be more severe than for numeral 7.
9 – Steam clean, high pressure, high temp jet wash to DIN40050 (German Std), extends BS EN 60529:1992