Jeff's Custom Garage

Jeff's Custom Garage Hi, I’m Jeff Couch. I grew up working on Classic and Show Cars. I have over 30 years experience wi

Nice little 67 Mustang, everyone has to learn and I’m all for that, but sometimes the learning curve can steep and expen...
04/14/2024

Nice little 67 Mustang, everyone has to learn and I’m all for that, but sometimes the learning curve can steep and expensive, especially with a Ford, they were known for having 7 different versions of everything, the engine developed some valve train and cylinder head issues and the owner wanted to do the repairs himself, he watched some YouTube videos and got some bad advice from the internet, couple that with some incorrect and incompatible parts from eBay and long story short he ended up with an engine that ran poorly and had a damaged camshaft, tore the engine down, replaced the cam and lifters, then researched and sourced the correct valve train components for the heads he installed and now it runs great, back to being the great little cruiser he was wanting it to be

Annual Corvette show in Enid, well over 100 beautiful Corvette’s
04/06/2024

Annual Corvette show in Enid, well over 100 beautiful Corvette’s

03/28/2024

So, I’ve been putting this off, but has to be done at some point, I had a back injury first of the year and have been dealing with that, had a little surgery last week, at the advice of my surgeon my days of being a mechanic for a living are quickly coming to an end. It’s time for me to find something to do for a living that doesn’t require physical labor if I want to remain functional going forward , those of you who know me know this has basically been a dream job for me, better to have had it for a while instead of never at all I suppose, I can’t even begin to express my gratitude to everyone that has supported me during this chapter of my life, special thanks to my incredible wife Julie who has 100 % got my back no matter what, hopefully next week I can ease back in, I still have a few cars left on my list to finish, so a few more car posts before I embark on the next chapter of my life

Been a good 6 month project and there’s been a huge amount of work done on this ole girl, it’s a completely different ca...
03/28/2024

Been a good 6 month project and there’s been a huge amount of work done on this ole girl, it’s a completely different car now, complete drivetrain, complete suspension, steering , brakes, exhaust system, wheels and tires and a few other things, runs drives and rides great

1964 Impala, 6.2 LT and 6L80E trans, full air ride, aftermarket gauges, and more, built by the owner who is not a mechan...
03/06/2024

1964 Impala, 6.2 LT and 6L80E trans, full air ride, aftermarket gauges, and more, built by the owner who is not a mechanic by trade in his garage, I’m personally impressed at the level of skill he possesses, removed the rear differential carrier and installed a limited slip unit and new set of Richmond gears, final tune and an alignment and this cool cat is ready for the streets

69 Roadrunner, phase 3, front suspension rebuild, all new bushings, ball joints, and tie rod ends, replaced bent strut r...
12/08/2023

69 Roadrunner, phase 3, front suspension rebuild, all new bushings, ball joints, and tie rod ends, replaced bent strut rods and bent right upper control arm, thanks to Mustang Alignment for taking care of the alignment, this one has had a lot of work but we’ll make a nice car out of the ole girl yet

Must be transmission week , carry out 4L60E for an 07 Tahoe
11/15/2023

Must be transmission week , carry out 4L60E for an 07 Tahoe

2013 Silverado 1500, belongs to my buddies son, 4L60E, had a roller bearing failure in the front planetary, ground itsel...
11/13/2023

2013 Silverado 1500, belongs to my buddies son, 4L60E, had a roller bearing failure in the front planetary, ground itself up pretty good, had to do some extra grinding just to get it apart, needed some extra hard parts, all good now

69 Roadrunner phase 2, complete drivetrain , rebuilt 440 engine , rebuilt A727 transmission with 2500 stall speed torque...
11/13/2023

69 Roadrunner phase 2, complete drivetrain , rebuilt 440 engine , rebuilt A727 transmission with 2500 stall speed torque converter and 3:55 gears with a Suregrip differential for the rear end, next up phase 3, front suspension rebuild 😁

1970 Dodge D100 pickup , replaced the original instrument panel with an aftermarket gauge package, repaired a trans leak...
11/06/2023

1970 Dodge D100 pickup , replaced the original instrument panel with an aftermarket gauge package, repaired a trans leak and replaced a leaking air ride bag, very unique truck

Not something you see everyday , a 56 Lincoln Premier , passed on from father to son , pulled it out of a shed where it ...
10/11/2023

Not something you see everyday , a 56 Lincoln Premier , passed on from father to son , pulled it out of a shed where it had been sitting for over 7 years, very nice car, just needs a good bath , put some fresh gas in it, spent a little time and got it to start and run, Ole girl runs and drives surprisingly well , got some strange looks from people on the street while I was driving it, new owner going to take over from here 😁

Black Beauty’s first car show, not too bad, first in class
10/07/2023

Black Beauty’s first car show, not too bad, first in class

Address

Yukon, OK
73099

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+14055500874

Website

Alerts

Be the first to know and let us send you an email when Jeff's Custom Garage posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category