American Standard Fiberglass Repair

06/13/2026

🇺🇸AI captions suck 🇺🇸

There. I said it.

Thank you everyone for calling and texting.

I’m not dead.

I’ve had my head down recently.
— There is a lot to do around here.

I hope to work out some of the website bugs you guys have been talking about soon.

A huge shout out to all the homies for ordering and giving us constructive feedback! This stage of Product testing has been very helpful for us as we expand the library.

The goal here is to get you as reasonably close as possible, while giving you the wiggle room you need without mudding or contaminating the color.

Each color has degrees of variants. We are verifying with you, our customer.

We are tracking your experiences.

This is progress.

— Jon

Gen 9:13-16

05/19/2026

2017 Ranger 520C, submerged underwater object allision.

This is a good example of fiberglass delamination from impact damage.

05/17/2026

🇺🇸🇺🇸🇺🇸

05/16/2026

To the homies that just started using peel ply…

You gotta do the slap.

It doesn’t work if you don’t do the slap.

Don’t screw it up.

(This is satire)

As for the air in the surface resin..

I got my surface temp a lil spicy while post curing.

Don’t do that.

Shabbat shalom bro’s 🤙

05/08/2026

🔔 Peel-ply Vs. Wax Paper 🔔

Every time I post peel-ply, someone tells me wax paper gives the same result.

Ain’t no way.

I figured I’d test your theories for myself.

Making some panels here to test for metamerism in our product.

Thank you to everyone who has been assisting us with our colors, and product testing.

I really appreciate you all. 🙏

05/08/2026

We spent a lot of time on this boat last year.

I’m very excited to see Alex get this thing on the water soon. Easily one of the coolest eliminators I have seen. I am in love with the color scheme.

05/08/2026

Pre-launch orders are going out.

Let me know what you think!

🇺🇸🇺🇸🇺🇸

My favorite homies at Master Boater's Marine Solutions (West Virginia) has some proper material en route 👌