Differential eng. inc.

Differential eng. inc. Very unique custom made axles of Rockwell, Meritor, Dana axles.
(10)

Operating as usual

The most expensive single axle i have made. Late model Mercedes Benz G63 wagon 6x6 portals. Valued at $17,000
04/03/2021

The most expensive single axle i have made. Late model Mercedes Benz G63 wagon 6x6 portals. Valued at $17,000

What keeps me busy.
11/30/2020

What keeps me busy.

07/03/2020
South Florida Jeeps

South Florida Jeeps

#soflojeeps #6x6 #Jeep The twin Turbo Diesel 600HP full 6wd 6x6 from South Florida Jeeps. Call us for more info and lets build yours today.

These were picked up today. For 2019 and 2020 JL with 5.13 gears. More 6x6  jeep's running around the north side of Miam...
04/21/2020

These were picked up today. For 2019 and 2020 JL with 5.13 gears. More 6x6 jeep's running around the north side of Miami.

Differential eng. inc.'s cover photo
01/29/2020

Differential eng. inc.'s cover photo

Have completed the Dana S110 axle set. The weights and the wheel pattern are the same as the F106 axles. This front does...
01/18/2020

Have completed the Dana S110 axle set. The weights and the wheel pattern are the same as the F106 axles. This front does not have U joints, 6 1/2" bell CV and the steering stops are set at 42 degrees. Please do not ask about a price, I have no interest in building anymore of these axles. The amount of work in converting a rear axle into a steer axle and making 90% of the parts is just too much machine time.

Differential eng. inc.'s cover photo
01/05/2020

Differential eng. inc.'s cover photo

Time to release some pic's of the Dana S110 axle build. The very first Dana S110 spool, using Con-vel's 1 7/8" going in ...
01/04/2020

Time to release some pic's of the Dana S110 axle build. The very first Dana S110 spool, using Con-vel's 1 7/8" going in and 1.950 x 38 spline at the drive cap.

Finished this set up, The front has 8 1/2" offset to the driver side and the rear has 2 1/8" offset to the driver side. ...
11/29/2019

Finished this set up, The front has 8 1/2" offset to the driver side and the rear has 2 1/8" offset to the driver side. I should be at hog-waller about 10:00 AM saturday morning.

All fab'ed. and then machined. Meritors baby.
10/09/2019

All fab'ed. and then machined. Meritors baby.

Have completed the thur-shaft axle for a 6x6  H2 hummer build. Will be shipping it out in a few days to China.
10/08/2019

Have completed the thur-shaft axle for a 6x6 H2 hummer build. Will be shipping it out in a few days to China.

Another set done, on to the next set.
08/19/2019

Another set done, on to the next set.

A little curious on stock hub & cap and lite hub & aluminum cap weight.
07/19/2019

A little curious on stock hub & cap and lite hub & aluminum cap weight.

I would also like to show the latest for Meritor steer axles. With these 4340 alloy yoke ends i can make 4340 alloy axle...
07/13/2019

I would also like to show the latest for Meritor steer axles. With these 4340 alloy yoke ends i can make 4340 alloy axle shafts in any length steer axle with any spline from 16, 32, 35, 36, 39 and 47 x 2" spline. The yoke end will be bored and splined the same as the other end of the axle.

I found some time to work on this Meritor knuckle. There is a lot of machine work to make sure it is right. Ounces add u...
07/13/2019

I found some time to work on this Meritor knuckle. There is a lot of machine work to make sure it is right. Ounces add up to pounds, take all you can and leave the strength. Steering knuckle with 2 king pins and bolts, side by side.

Later this summer at a mud bogg near you will be a H1 Hummer on these axles with 28L's
07/05/2019

Later this summer at a mud bogg near you will be a H1 Hummer on these axles with 28L's

Thanks to Innovative Machining for the beautiful Meritor planet caps. Now you can see the wright savings. Almost forgot ...
06/25/2019

Thanks to Innovative Machining for the beautiful Meritor planet caps. Now you can see the wright savings. Almost forgot the new bolts

Holden-on Motorsports, we are getting closer to Zoom, zoom.
06/05/2019

Holden-on Motorsports, we are getting closer to Zoom, zoom.

Have been working on this set for a long time. For a 6x6 build in Canada, no planets, final ratio is 3.90 for the HWY. T...
05/21/2019

Have been working on this set for a long time. For a 6x6 build in Canada, no planets, final ratio is 3.90 for the HWY. Two lockers in the rears with open front with all 4340 alloy axle shafts.. The two rear will be installed with air glider kits, the posts on top the housings will be cut to length for the upper torque rod arm.

Another 2018 JK 6x6. This one will be in the New York international Auto show next month.
03/26/2019

Another 2018 JK 6x6. This one will be in the New York international Auto show next month.

Three axle set for 400 Hp diesel, 8 lug with Detroit True-Trac in all 3 axles and 4.10 gears. For the "how much" guys, $...
03/17/2019

Three axle set for 400 Hp diesel, 8 lug with Detroit True-Trac in all 3 axles and 4.10 gears. For the "how much" guys, $15,950 for this set. In the crate and ready to ride.

Where's the beef. Here is the beef. This started about 18 months ago to have these made. Heavy duty Ford 9" gear sets wi...
01/15/2019

Where's the beef. Here is the beef. This started about 18 months ago to have these made. Heavy duty Ford 9" gear sets with 35 spline input made from 8620 steel for HWY. use. These are for my thur-shaft axles.

Have completed the thur-shaft axle for the 2019 Chevy 1500 Silverado.
01/09/2019

Have completed the thur-shaft axle for the 2019 Chevy 1500 Silverado.

Another 6x6 hummer coming in 2019 from Xtreme Hummer Performance.
12/05/2018

Another 6x6 hummer coming in 2019 from Xtreme Hummer Performance.

The 6x6 truck has arrived at the SEMA show.
10/28/2018

The 6x6 truck has arrived at the SEMA show.

Really excited to show this project this week @semashow it will be in the @americanforcewheels booth. We will post some build pictures and a walk around as the week rolls on!

Rock-A-Tor front and rear. Front uses two meritor short axles and the rear will have 2" 4340 ally axle shafts. The front...
09/21/2018

Rock-A-Tor front and rear. Front uses two meritor short axles and the rear will have 2" 4340 ally axle shafts. The front came in at 175 LBS. and the rear at 152 LBS.

Another set of new Meritors with a 9" offset front and rear steer close to center.
09/06/2018

Another set of new Meritors with a 9" offset front and rear steer close to center.

The black one has 9" with Axle-tech portals 6x6 and the white one is 6x6.
08/17/2018

The black one has 9" with Axle-tech portals 6x6 and the white one is 6x6.

Both of our custom built 6x6 Jeeps are at SORS today, one concept with two unique outcomes. #southern #6x6 #custom #lovewhatyoudo #hemi #fabwork #jeeplife @ Southern Off-Road Specialists

I have completed the 6x6 Meritor axle set for the 2018, 3500HD SEMA show build. These are my latest Meritor hybrid axles...
08/08/2018

I have completed the 6x6 Meritor axle set for the 2018, 3500HD SEMA show build. These are my latest Meritor hybrid axles with 3.90 ratio for diesel trucks with big HP. Equipped with the 2018 factory ABS and parking brakes.

Coming: 6x6 Meritor axles with facrory ABS in a 2018 Chevy 3500HD for the 2018 SEMA show with 26" American Force dually ...
07/22/2018

Coming: 6x6 Meritor axles with facrory ABS in a 2018 Chevy 3500HD for the 2018 SEMA show with 26" American Force dually wheels.

Some Hummer 9" diff's went out today. 35 spline DT. ture-trak, bolt in replacement.
06/27/2018

Some Hummer 9" diff's went out today. 35 spline DT. ture-trak, bolt in replacement.

Number 5 and 6 thur-shaft 9" axles are headed off to Hennessey Performance. Just received the order for number 7 and 8
05/12/2018

Number 5 and 6 thur-shaft 9" axles are headed off to Hennessey Performance. Just received the order for number 7 and 8

Address


Alerts

Be the first to know and let us send you an email when Differential eng. inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Videos

Nearby autos & automotive services

Comments

I am interested in a set of axles. was wondering if the front rear axle has a power divider like a semi, so you could use only use one axle as a drive unit when two drive axles are not needed.
Are you looking for narrow Axletechs? They're some up here going for a decent price at Auction?
Could you offer me your opinion, I have these inner half shafts. The retainer plate matches my meritor IFS, the half shaft side matches my Axletech(metric) half shafts. Looking at the splines are they Meritor or Axletech ? Thanks for your time