Clicky

Mauzy Racing Engines

Mauzy Racing Engines At Mauzy Racing Engines we feature a complete machine shop including a DTS
engine dyno and a Land & Sea in floor chassis dyno capable of handling over
2000 HP.

We also specialize in custom tuning Ford & GM using SCT software. We carry VP Racing fuels which we keep in 54 gal drums or 5 gal containers. We carry CENPECO Racing lubricants and street approved oils and are a dealer for Callies Performance Products, Eagle Specailty Products, Ross Pistons, Dart
Machinery, Procharger ATI, Manley, Comp Cams, SCT products and many more. We are very competitive on price, and can almost always price match with the big mail order warehouses.

Operating as usual

'67 Shelby 428 getting aline honed.
12/10/2015

'67 Shelby 428 getting aline honed.

Line boring a John Deere block. We can do them big or small.
06/13/2015

Line boring a John Deere block. We can do them big or small.

Mauzy Racing Engines's cover photo
01/12/2015

Mauzy Racing Engines's cover photo

Mauzy Racing Engines
01/12/2015

Mauzy Racing Engines

Makes a Monday worth while when you pick up 20 cfm with a valve job!
12/30/2014

Makes a Monday worth while when you pick up 20 cfm with a valve job!

Another 5.9 on the chopping block. Getting a sleeve to take care of a cracked cylinder.
12/03/2014

Another 5.9 on the chopping block. Getting a sleeve to take care of a cracked cylinder.

11/27/2014

Happy Thanksgiving! Have a great day with family and friends!

Getting the deck square and flat on a 5.9  Cummins.
11/14/2014

Getting the deck square and flat on a 5.9 Cummins.

Balancing up a Small block Ford.
11/02/2014

Balancing up a Small block Ford.

Profarm turbo plug (restrictor)
09/08/2014

Profarm turbo plug (restrictor)

24V Cummins with some mild port work, surfaced and ready for assembly.
06/08/2014

24V Cummins with some mild port work, surfaced and ready for assembly.

K24A Honda block all finished up after the LA sleeve install. Ready for some boost now!
04/09/2014

K24A Honda block all finished up after the LA sleeve install.
Ready for some boost now!

Starting to get some engines buttoned up finally!
03/30/2014

Starting to get some engines buttoned up finally!

Finishing up double drilling a DT466 International crankshaft.
03/03/2014

Finishing up double drilling a DT466 International crankshaft.

Machining a K24a Honda block for La sleeves.
02/18/2014

Machining a K24a Honda block for La sleeves.

Cutting keyways in a Chevy Duramax crank to eliminate the weak oem pins.
02/10/2014

Cutting keyways in a Chevy Duramax crank to eliminate the weak oem pins.

Big block Chevy crankshaft after having the  surface treatment that not only frees up  Horsepower it looks very cool too...
01/26/2014

Big block Chevy crankshaft after having the surface treatment that not only frees up Horsepower it looks very cool too! Looks like they just come from the chrome shop!

One cleaned up CNC machine...sad it won't stay like this long!
01/19/2014

One cleaned up CNC machine...sad it won't stay like this long!

Cleaned up chambers and bowls on some vintage small block Ford heads. Well...that's good enough for a Friday. Everyone h...
01/11/2014

Cleaned up chambers and bowls on some vintage small block Ford heads. Well...that's good enough for a Friday. Everyone have a good weekend!

01/01/2014

Happy New Year Everyone! Hard to believe that another one is gone!
Good time to get started on that engine project you've been putting off!

12/25/2013

Merry Christmas everybody! Hope you have a great one!

Cutting new pin bushings on the Tobin Arp. This is the oldest machine in the shop and the coolest, it will cut pin bushi...
12/03/2013

Cutting new pin bushings on the Tobin Arp. This is the oldest machine in the shop and the coolest, it will cut pin bushings in connecting rods to a mirror finish.

12 valve Cummins cut for fire rings. The ultimate fix for high boost applications!
11/13/2013

12 valve Cummins cut for fire rings.
The ultimate fix for high boost applications!

Boring a 5.9 24valve Cummins. Good job for a Friday!
11/08/2013

Boring a 5.9 24valve Cummins. Good job for a Friday!

Duramax head surfaced, mild bowl work and valve job ready for a final wash and assembly.
11/05/2013

Duramax head surfaced, mild bowl work and valve job ready for a final wash and assembly.

'07 Saleen F150 ran pretty bad when she came in the door, drives and runs very nice after a proper tune!
10/03/2013

'07 Saleen F150 ran pretty bad when she came in the door, drives and runs very nice after a proper tune!

Finished waterjacketed turbo ready to install.
06/21/2013

Finished waterjacketed turbo ready to install.

Making headway on the marine turbo.
06/21/2013

Making headway on the marine turbo.

Some early photos of building a complete water jacketed housing around a turbo and downfall pipe.
06/21/2013

Some early photos of building a complete water jacketed housing around a turbo and downfall pipe.

More marine turbo pictures.
05/31/2013

More marine turbo pictures.

More marine turbo pictures.
05/31/2013

More marine turbo pictures.

Custom turbo setup in a marine application, lots of fabrication! 2.3 Ford with a blow through carb. setup.
05/31/2013

Custom turbo setup in a marine application, lots of fabrication!
2.3 Ford with a blow through carb. setup.

24V 5.9 Cummins head. Surfaced, new guides, valve job ready for a final wash up and assembly. Yes we can O-Ring / cut fo...
04/12/2013

24V 5.9 Cummins head. Surfaced, new guides, valve job ready for a final wash up and assembly.
Yes we can O-Ring / cut for Fire rings too.

Address

105 Spar Mine Rd
Timberville, VA
22853

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8am - 5pm

Telephone

(540) 975-0195

Alerts

Be the first to know and let us send you an email when Mauzy Racing Engines posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Videos

Nearby autos & automotive services


Other Timberville autos & automotive services

Show All