RPGraphix

RPGraphix RPGraphix is a one stop shop for upgrading your car, truck, Jeep or powersports machine. Trail or tow we'll keep you rocking on the go!!

From audio and accent lighting to accessories and graphics, we've got you covered.

09/11/2026

This X3 was back under the knife again to add a Tango 2 Turn Signal kit from SSV Works along with a Kemimoto shock tower light bar. The SSV Works Tango 2 universal kit comes with markers for both the front and rear of the machine, a full RGB adjustable backlight rocker switch and horn. This kit gives you turn signals, hazards and horn all in 1 rocker switch location!!! It's also compatible with most other turn marker lights in the event if you wanted to use a different style marker light as well.

The Kemimoto shock tower light bar mount bolts in to existing bolt locations and provides a great mounting option for many 10"-14" mini light bars. This install went super smooth and it came out looking super clean and factory..

So, as always, if you're in need of accent lighting installed or looking for possible lighting options reach out and see what RPGraphix can do for you!!

Just wanted to inform all of you that the shop will be closed September 17th-20th. Taking a little bit of time off to go...
09/11/2026

Just wanted to inform all of you that the shop will be closed September 17th-20th. Taking a little bit of time off to go play up in NH. So if you need anything be sure to reach out.. Thank you as always!!

09/11/2026

This X3 was back for some more goodies!!!

It's a 2021 and still had the original battery...but after 5 years it decided to tap out so got him setup with a new MotoBatt battery with higher cranking power and more reserve capacity. In addition we added a set of whipless lights from Xprite Offroad & Lighting. Sadly I didn't have the opportunity to get any images of them lighting up the nights sky but I assure you they are pretty sweet!!!

Another piece that was installed was a switch controller from Auxbeam.com. This rig pretty much had all the factory switch locations filled up. The switch controllers from Auxbeam.com offer several options from 4-12 integrated soft switches allowing to control multiple devices/equipment even if you have no spots left in your machines dash.

Last we added a 30" chase light from Kemimoto. This whole unit is controlled right from the switch controller. Allowing it to power on, trigger the white reverse light and cycle through all the different chase light patterns.

So, as always whether you're in need for lighting, switch controllers or even installation of something you may already have and may not be comfortable installing yourself......reach out and see what RPGraphix can for you!!!! Thank you!!!

Clutch kits in my opinion are in the top 5 things you should consider doing to any machine. They can help provide smooth...
09/11/2026

Clutch kits in my opinion are in the top 5 things you should consider doing to any machine. They can help provide smoother, less jerky starts. They improve belt grip (which helps with preventing belt slip and can prolong belt life). They provide better and more consistent throttle response especially in your mid to higher rpm ranges (where OEM clutching typically feels sluggish and unresponsive) and for those of you that like the performance side of these machines will also get better/faster acceleration as well.

Now, not all of things may be something that interests you. And that's ok. But clutch kits ultimately help your machine perform better and more importantly can help prolong belt life and prevent belt slippage which is always a concern with CVT style transmissions. Now, on the flip side there is still proper research you should do to find what kit/manufacturer you trust to install into your machine. Not all kits are created equal....

With all that being said this customer had purchased a clutch kit for one other reason that I had not mentioned yet...... They upgraded to a bigger sized tire than what came factory on his machine. He stated that it felt like all the power the machine had was cut in half once he put the new tires on.

The other big thing clutch kits can help with is exactly this. When changing tire sizes it changes the overall gear ratio's of the machine. That change effects how the clutching operates. With a proper clutch kit you can help bring that "power" back to your machine. Now there are limitations to how big a tire you can go where a clutch kit can help correct some of that change. They can't fix and improve every scenario but they can cover a large percentage of them.

This particular kit was from Dalton and after hearing back from the customer he was very happy with the difference it made. During the install I didn't just take out the old parts and put in the new ones. I went through and did a thorough cleaning of the clutches themselves, inspected clutch parts, resurfaced the sheave faces, polished up the weight arm pins and installed the new clutch kit components.

So, as always, if you have questions on if you could benefit from a clutch kit or have one that you need installed reach out and see how we can help!! Thanks as always!!!

This was a quick job but what a difference it made in the looks department!!! This Camaro is in really nice shape but th...
09/11/2026

This was a quick job but what a difference it made in the looks department!!! This Camaro is in really nice shape but the factory headlights were looking rough.....all faded and yellowing. The customer had tried one of the "headlight restore" kits but said it really didn't make that great of an improvement and felt that they got worse after a short period of time. Now, I don't sell headlight replacement assemblies but he asked if he got new ones if I could install them for him. Not a problem!! So we made an appt time and got them swapped out. Now this Camaro is looking super clean and sharp again!!!

So, as always, if you're in need of having/needing something installed.... reach out. No harm in asking if it's something we may be able to help you with. If you have purchased something from anywhere... Amazon, Ebay, online, etc.... If it revolves around lighting, car audio or off-road powersports we might be able to help you out...Thanks as always!!!

This was a fun job!! Customer was looking to perform a few upgrades to his 2025 RZR XP. Here at RPGraphix I was more tha...
08/24/2026

This was a fun job!! Customer was looking to perform a few upgrades to his 2025 RZR XP. Here at RPGraphix I was more than happy to help accomplish that for him.

First he was looking to upgrade his suspension. As with many of the machine's out there the factory springs sag out causing lower ride heights, rougher riding and just minimal performance. So got him setup with a true dual rate spring kit from Shock Therapy. These kits make a huge difference is how the machine performs, it's comfort level and it helps fully restore your machine to proper ride height.

Next up was he was looking to get a little more power out of it and was hoping to try and find a way to cool it down in the cab some. No problem!! Got ya covered there as well. Got him setup with a performance tune from Evolution Powersports. Once he had dropped the machine off first thing I did was remove his ECU and got it shipped out to the masters over there at Evolution Powersports. They were able to get his ECU flashed and shipped back out to me in less than 24hrs. On its trip back I made to sure to have them include one of their premium high-flow air filters. As you could see in the photos is was packed pretty good with dust and debris. With the tune not only is his machine going to have better power, throttle response and overall performance but it also changes the cooling fan to come on at a lower temp (almost 25 degrees lower). This not only helps the engine perform better and helps keep it cool but it also helps keep temps inside the machine cooler by not having it get as hot!!! WINNING!!! So once they came back I got those installed and moved onto the next area....

At the time of this job he is running the factory tires still but he plans on going up to 32" tires. So, with that in mind and the added performance from the tune we wanted to make sure everything would work together to make the most power and get it to the ground. QSC Clutching -QuadShop Customs was the simple answer to make that happen. Got him setup with a killer clutch kit from Adam over at QSC Clutching -QuadShop Customs to help make sure his newly added power and his tires can put it down.... While I was in there cleaning up the clutches also noticed that his rollers in the secondary were not in the best of shape. So ordered him up a replacement roller set from Hunterworks Inc. to solve that issue. And I can assure you that when I test drove the machine....it was a very noticeable difference between factory and after it was tuned/clutched.

To top everything else off we went ahead and did a full fluid service on it as well using Maxima Racing Oils and he also had asked me to install a light bar he had purchased previously that he hadn't had a chance to. Again, not a problem!! Got ya covered!!!

So, as always, if you're in need of performance parts, wheels/tires, general maintenance, lighting, two way communications or nearly anything else for these machines......reach out and see what we have to offer you!!!

PS...... I almost forgot... Also needed his rear inner bushings on his upper radius rods replaced as well. Got him setup with All Balls Racing's replacement bushings to get those components fitting together like they should!!

This was a much "needed" upgrade. 2023 Can-Am Maverick Sport 1000 that came stock with 27" tires that are staggered size...
08/24/2026

This was a much "needed" upgrade. 2023 Can-Am Maverick Sport 1000 that came stock with 27" tires that are staggered sizes not allowing for the tires to be rotated to help get longer life from them. Not only that but they were also mounted on factory 12" wheels. This setup certainly can get the job done most of the time but limits you on tire life, durability and performance.

So...... in comes the new 14" Rocky Mountain ATVMC Tusk Cascade wheel wrapped in the new Sedona Trail RIPR 30x10x14 Tire. The Cascade wheel not only looks better but is a much stronger wheel assembly that can take the abuse of off-road riding. (I've seen many damaged factory 12" Can-Am wheels) The new Trail RIPR tires are designed to give you some serious grip on all types of surfaces yet still provide a smooth ride and good puncture resistance with their 8ply rating. This new wheel/tire package really changed the look of this machine for the better.

These machines are clutched ok from the factory but not great. So we also made sure to get a package together including a new clutch kit from QSC Clutching -QuadShop Customs. The new weight arms are contoured differently then the factory which allows for smoother engagement, better belt grip throughout the RPM range and better overall power delivery. (Sorry, I totally dropped the ball on getting photos of installing the kit...) All in all, this machine looks killer with the new wheel/tire package and performs even better with QSC Clutching -QuadShop Customs clutch kit!! Plus, the customer can easily be able to rotate tires to help get the longest life out of them!!

So, as always, if you're in "need" of new tires or are looking to get a bit more performance out of your machine......reach out and see what we have to offer you. We have many brands of wheels and tires to choose from!!! And if you're looking for performance upgrades whether clutch kits or tunes we have you covered there as well!! The season is getting shorter each day. Don't wait till it's over to upgrade your machine so it sits in garage till next season....take advantage now. packages are available!!!!

I get a lot of avid riders who say they could care less about having a radio in their machine.....They'd rather listen t...
08/23/2026

I get a lot of avid riders who say they could care less about having a radio in their machine.....They'd rather listen to the machine or often say, "The machine is so loud I couldn't hear it anyway"...

But I'd still rather have one than not. And this customer feels the same way. This 25 Ranger owner wanted to add something into his machine when he's out on his property working or clearing snow during winter months. And this SSV Works kit is a great solution for just that. Don't let its small size fool you. This has a hideaway amp that pumps out some good clean power!! And even though only a pair of speakers was installed it can easily power another pair if he ever wanted to add another set. The small display unit with included machine specific mount fit perfectly onto the factory cup holder panel. The MRB3 media controller from SSV Works gives you BT connectivity, AM/FM radio and an aux input allowing you several source audio options to choose from.

The custom designed 6.5" speaker enclosures were designed to fit right into the factory pockets in the dash keeping the overall install super clean. These enclosures loaded up with SSV Works 6.5" WP-A6 speakers they deliver good bass response and clean highs and vocals. It's a great 2 speaker kit designed for both the Ranger 1000 and Ranger XP1000 model machines. You def can't go wrong with this setup!!!

While it was here we also added a Kemimoto rear view mirror to help when backing up and making sure he didn't leave anybody behind!!

So, as always, if you're in the market to add some tunes into your machine feel free to reach out and see what we can offer you!!!! We have many brands to choose from and plenty of system design options as well!!!!

Had another CF Moto U10Pro come in to get some cab enclosure items installed. Customer had ordered SuperATV front glass ...
08/23/2026

Had another CF Moto U10Pro come in to get some cab enclosure items installed. Customer had ordered SuperATV front glass and rear tinted plexi windshields and we got him setup with a killer pair of Team MSC by Trail Armor doors. Its amazing how much a couple accessories can totally change the look and feel of a machine. These accessories really made this machine look more aggressive and ready to tackle the trails. Everything fit and installed great. The windshields keyed into the profit cage nicely and provided good seals all around. The Team MSC door kit also installed very clean and didn't require a lot of adjustment to get them closing smooth and easy.

Overall even the customer couldn't believe how much these items changed the look of the machine and how much more comfortable (and safer) he'll be.

So, as always, if you're in the market for cab enclosure items or anything else you may need/want for your machine..... reach out to us today and see what options we have available for you and your machine!!

Address

6B Bluebird Road Building In Rear
Hudson Falls, NY
12803

Opening Hours

Monday 10am - 6pm
Wednesday 10am - 6pm
Thursday 12pm - 8pm
Friday 12pm - 8pm
Saturday 10am - 5pm

Telephone

+15182239974

Website

Alerts

Be the first to know and let us send you an email when RPGraphix posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to RPGraphix:

Shortcuts

Share

Category