Harn Kustoms LLC

Harn Kustoms LLC Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Harn Kustoms LLC, Motorcycle repair centre, Sheldon, IA.

Hallie Bean reppin' some youth Harn Kustoms merch! Let us know if you've got a kiddo that needs to add some cool chopper...
12/21/2025

Hallie Bean reppin' some youth Harn Kustoms merch! Let us know if you've got a kiddo that needs to add some cool chopper shirts to their closet!
ALSO! we've got almost all of the sweatshirt/t-shirt orders done! We'll send you a message tomorrow and let you know when you can come pick up your order!! 🤘🤘

12/05/2025

Hey Guys! I know it's been a while since I have touched base with ya. But I have been having a lot of requests for sweatshirts and hoodies. So with that being said, we will be taking pre-orders for these. Orders will need to be paid in full at time of ordering, we will be putting in an order Monday, December 15th. You can order by commenting on this post or messaging this page, or contacting Ashley or myself. We do ship, you pay shipping costs. Prices are listed below.
-T-Shirts
Small-2XL - $25
3XL and up $28
Make it a TALL for $3
-Hoodie
Small-2XL - $35
3XL and up - $38
Make it a TALL for $3
-Crew necks
Small-2XL - $30
3XL and up - $33
make it a TALL $3
We will order kids sizes as well. Colors may vary, Black and white is what we have quoted for.
We press all garments in house, so if you have your own garment,(pants, shirts, sweater, bag, etc.) let us know what you have and we can see if we can make it work!!

Chopper things 🤘🤘Photo cred: Mike Harn
07/18/2025

Chopper things 🤘🤘
Photo cred: Mike Harn

New guy is pretty bossy and keeps hiding my tools, but he swears up and down that he knows what hes doing. Good help is ...
05/31/2025

New guy is pretty bossy and keeps hiding my tools, but he swears up and down that he knows what hes doing. Good help is hard to find so I guess ill keep him around.

A little rip around town with my little buddy🤘🤘
04/09/2025

A little rip around town with my little buddy🤘🤘

03/22/2025

Some mock up before I welded the seat hinge and added the chrome edge guard to the seat pan.

03/22/2025

More of the seat pan build

03/22/2025

Facebook won't let me post multiple videos for some reason, so I'll be posting a couple videos individually. Anyways! Here's a clip of the seat pan I did. I added a little hide away tube, for insurance/registration to stay hidden and put of the elements, while being easily accessible 💥💥🤘🤘

A big thanks to Doug Johnson for bringing in his chopper for me to fab up a few custom parts! Had a lot of fun with this...
03/22/2025

A big thanks to Doug Johnson for bringing in his chopper for me to fab up a few custom parts! Had a lot of fun with this one!
Doug asked if I could clean up the rear fender a bit and relocate his blinkers, tail light and license plate, so I made a vertical mounted license plate bracket with a slight bend for a little esthetic and incorporated the tail light into that.
The fender was only fastened down by the bottom of the frame and behind the seat so he wanted something to beef that up a bit so it didn't rattle and vibrate so much while going down the road. I ran a strip of flat stock underneath and bent it to the curve of the fender and used the excess on the sides to mount the new chain link struts.
The struts are log chain that were tacked and bent into shape to accommodate the shape of the rear section of the chopper and then welded solid.
I also swapped the old smaller springer seat with a much larger springer seat that actually came off of a Harley Crossbones. We thought the bigger seat would give a little more comfort and flow a lot better with the wide rear tire.
The 2.5 gallon coffin tank was replaced with a much larger tank, that we thought matched the rest of the chop as well. However it was a little too long on the end by the seat so I had to do some surgery down there to make it fit as well.
And my favorite part of working on this bike is the seat pan I made for bigger seat. I couldn't let simple be simple, and had to add a little bit of bad ass into the seat pan, so i drew up an idea and went with it, and it turned out pretty cool. Once all the parts were done and fabbed I sent em off to be dipped in chrome and copper and the whole look of the bike changed. I can't wait to see it after he gets it painted it's gonna look awesome! Here's a few pictures for you to check from the build and a picture of Doug with his chop when he came to pick her up. I've got a few videos I'll post as well.
🫡🫡🤘🤘

03/07/2025

What's up, guys! It's been a while since we've posted, and we wanted to give you all a little update. I appreciate all your patience with the t-shirt orders, the delay is completely out of our control, unfortunately. We will have, hopefully, ALL shirts done by Sunday! We will attach our Venmo account, along with Cash app, and if you need other monetary options, we can work with you, we also take credit/debit cards through SQUARE services! Also, we've added a new phone number to the page as well! Call or text, for now, until we can get the voice mail set up.

Address

Sheldon, IA
51201

Telephone

+17123442943

Website

Alerts

Be the first to know and let us send you an email when Harn Kustoms LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Harn Kustoms LLC:

Shortcuts

Share

Category