Possum Holler Garage

09/11/2026

"Fire it up Friday" 1964 Ford truck factory 4x4 with brand new Ford V8 engine from blueprint with 375hp

09/09/2026

Been working on this 1955 2nd series Chevrolet pickup truck.. working on fitment and Gaps.. this thing's got all kinds of new technology including complete chassis swap, new LS engine connected to a new automatic transmission. Also Relocated the fuel tank to the rear of the truck under the bed.. it should ride really well. Pretty soon we'll tackle the interior and glass work... Too much fun! 🤯🥵😂

09/08/2026

Two for tuesday! The Labor Day weekend has come and gone, Now it's all labor again, 1969 vehicles seem to be a pretty popular vehicle lately! I'm going to have to figure up how many that we have restored and worked on within the last few years? 🤔

09/03/2026

Getting the motor mounts in order on the 1964 Ford 4x4 truck. We decided to go with a brand new blueprint crate engine on this project. Also we attached a brand new Ford AOD transmission with Borg Warner transfer case. Guaranteed to pull the barn down! 🔥

09/02/2026

I wanted show the interior / cargo area on the little 1957 international Metro a120 today. We have been working diligently applying the insulation panels to help keep the tingy, echo, and road noise to a minimum! I have to use these ratcheting poles to hold everything in place for 12 hours..... This is the unfun stuff of restoration. Also we are honoring the Florida Gators today drinking orange and blue Gatorade!

09/01/2026

I wanted to post this picture of the 1950 Chevrolet 3100 4x4 that we are nearing completion. We had to hand make the front bumper brackets so that everything would fit properly. We even got the grill installed without scratching any of the blue paint. Now I can honestly say it looks like a truck 👍🇺🇸

08/31/2026

Been working on this 1953 GMC panel truck, making lots of upgrades and adding some new technology,Most of it in the rear cargo area. We stripped out all the original cardboard headliner material and added insulation board straight to the metal, and then over the top of that we did a spray rhino liner and then over the top of that we used ABS board covered with a beautiful opal material ... And of course we restored the original oak wood wall board on each side going over the top of the opal material... We can talk about all of the floor upgrades and the backup camera and many other items another day 👍 it is Monday 🥵

08/29/2026

08/27/2026

Okay so here's a tough question on a thirsty Thursday afternoon? If you had to choose between the 1969 Camaro convertible or the 1950 Ford F1 pickup truck? Which would it be? Happy thinking 🤔🍻

08/24/2026

This little 1969 Ford Bronco is getting some much needed attention after sitting for many years! First task we started cleaning out the interior and getting rid of all the mouse houses! Including the one in the tailpipe!, Then we started working on the brake system inspecting and ordering the necessary parts 🥵😷😫🥱