The Car Passion Channel

The Car Passion Channel Eat, Sleep, Breath, Cars. My personal youtube channel all about cars. News, videos, featured rides... you name it.

For people who think cars are more than just "A to B"

Kicking off Miata Monday with one of the best photos ever taken of my car!! Shout-out to the homie for this insane set ...
10/31/2022

Kicking off Miata Monday with one of the best photos ever taken of my car!! Shout-out to the homie for this insane set that I'll be uploading this week, he also shot a behind the scenes video that you can see linked in his bio.

Thank you to all the people out there who helped me achieve this, and are a part of this. In February of 2011 when I sta...
02/14/2021

Thank you to all the people out there who helped me achieve this, and are a part of this. In February of 2011 when I started my channel I never imagined it would come this far, that I'd have my own silver play button, and that I'd be shipping merch orders all over the world. I've met so many people online and in person, and am so happy to be a part of this wonderful community. Cheers from CarPassion and here's to another 10 years 😅🍻

11/16/2020

More Info About The Build: (Quantities are to replicate mine)

48" x 48" x 0.187" ABS Plastic Sheet (1 needed):
https://www.eplastics.com/ABSBLK0-187HC48X48

100-Pack of #10-24 Machine Screws (70 needed):
https://amzn.to/35ARVeb

100-Pack of #10-24 Nylon Lock Nuts (70 Needed):
https://amzn.to/36GpgUn

50-Pack of L Brackets (35 needed):
https://amzn.to/2UAS5vC

2-Pack of Splitter Rods (2 needed):
https://amzn.to/3nvxaGQ

1-Pack of DEI 12" x 24" Heat Tape Sheet (1 Needed):
https://amzn.to/3lC4Thb

1-Pack of Black RTV (Less than 1 tube needed)
https://amzn.to/36EcG84

The following pieces are exactly the dimensions of the parts used in this build, but it's hard to find small quantities online. It will be much better to source them locally from a hardware store, or shop around online for similar products in smaller quantities. Total cost for everything below, in the quantities used, was about $11.00.

1" x 0.125" Steel Flat Bar (12" total length needed for 2 brackets)
https://amzn.to/2IGtLGx

#12-24 Machine Screws (2 Needed, Rear Bracket-to-Splitter)
https://amzn.to/3no8AHU

#12-24 Nylon Lock Nuts (2 Needed, Rear Bracket-to-Splitter)
https://amzn.to/38PCvVE

#12 Flat Washers (4 Needed, Rear Bracket-to-Splitter)
https://amzn.to/3lDEFev

1/4" x 28tpi x 1" Hex Bolts (2 Needed, Rear Bracket-to-Car)
https://amzn.to/3nsTOzJ

1/4" x 28tpi Nylon Lock Nuts (2 Needed, Rear Bracket-to-Car)
https://amzn.to/3lGZRAc

1/8" Drill bit was used to drill for the #10-24 screws threaded into the ABS

Standard AND Metric Screw Size vs Tap Drill Size Chart:
https://www.lincolnmachine.com/tap_drill_chart.html

Matt's Instagram
https://www.instagram.com/jinsoku_nb/

https://www.thecarpassionchannel.com

All amazon links above are affiliate links

10/16/2020

I'm going to tow my car 6 hours for a 10 second race. Okay maybe 12 seconds but who's counting. Wait, I'm counting, that's what this trip is about. Enjoy!

https://www.thecarpassionchannel.com

10/13/2020

As fun as it would be to all get together and race in person, this will still be a cool way to compare the 400hp Miata e-legends from across the country. I'm excited to run the car this weekend but I have lots of work to do!

Address

San Diego, CA

Website

Alerts

Be the first to know and let us send you an email when The Car Passion Channel posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to The Car Passion Channel:

Shortcuts

Share

Category