Mobile Mechanic Service

Mobile Mechanic Service As a mobile mechanic I fix all kinds of automotive issues on the spot. I work quickly and well. When I fix something it stays fixed.

This was a bit of a weird one. I showed up to a 1966 Beetle that was running poorly. I found a spark plug wire disconn...
02/27/2025

This was a bit of a weird one. I showed up to a 1966 Beetle that was running poorly. I found a spark plug wire disconnected, but once that was hooked up and timing set it was still running a bit funny. Then I noticed this hole in the carburetor. Apparently it's not uncommon for a strong backfire to dislodge the plug that belongs there and then there's a big vacuum leak. We explored a few options. Apparently it's the perfect size for a dime, and a lot of the guys in the forums were suggesting a dime and some JB weld to close it up more permanently. I opted for a piece of rubber hose and a bolt. Sealed it right up, and drives great again.

Thought I was in for a very bad day when one of these spark plugs broke in a cylinder head. Luckily I got it to back ou...
02/26/2025

Thought I was in for a very bad day when one of these spark plugs broke in a cylinder head. Luckily I got it to back out with an extractor.

I was replacing an ac compressor that was installed with too little pag oil. Most of the compressor ended up right here...
04/30/2024

I was replacing an ac compressor that was installed with too little pag oil. Most of the compressor ended up right here in the or***ce tube

I recently did a job with a stuck CV axle end. Another mechanic had been working on it and got stuck. Kudos to that gu...
03/15/2024

I recently did a job with a stuck CV axle end. Another mechanic had been working on it and got stuck. Kudos to that guy for the homemade slide hammer. Ingenious! If you happen to see this post it eventually worked after lots of finagling.

This MGB got a carb upgrade and a new header today. It runs really well now
03/12/2024

This MGB got a carb upgrade and a new header today. It runs really well now

Weird knock sensor code on this Honda. Turns out sneaky vermin under the intake manifold chewed some wires
02/16/2024

Weird knock sensor code on this Honda. Turns out sneaky vermin under the intake manifold chewed some wires

04/02/2022

My client today wanted his scooter to run immediately, and he didn't want to wait for parts. We made it work.

In the 90s the Chevy pickup had a throttle body fuel injection setup. This client didn't want to repair that system and...
03/17/2022

In the 90s the Chevy pickup had a throttle body fuel injection setup. This client didn't want to repair that system and opted instead for an Edelbrock intake, demon carburetor, and hei vacuum advance distributor. He's very happy with how it runs now.

This little pickup had a couple of codes stored. They pointed toward an electrical failure. When I opened the rear doo...
03/16/2022

This little pickup had a couple of codes stored. They pointed toward an electrical failure. When I opened the rear door I found these broken wires. Reconnecting them solved the problem.

This ford 5.4 had been leaking coolant from the intake manifold. The plastic manifold was old and cracked. A new manif...
03/15/2022

This ford 5.4 had been leaking coolant from the intake manifold. The plastic manifold was old and cracked. A new manifold and gaskets fixed the problem.

These brakes were making a terrible scraping grinding noise. When they get this bad the pads and the rotor need to be r...
03/14/2022

These brakes were making a terrible scraping grinding noise. When they get this bad the pads and the rotor need to be replaced.

Address

Robertsdale, AL

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm
Saturday 9am - 6pm

Website

Alerts

Be the first to know and let us send you an email when Mobile Mechanic Service posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category