Selby Marine Solutions LLC

Selby Marine Solutions LLC Based out of Reno, Nevada!! Providing reliable mobile service for all your Marine needs. Join along on the POV adventures.
(4)

08/14/2026

What was supposed to be a routine prop removal and inspection quickly turned into something much bigger. The inner prop was completely seized to the shaft—we broke TWO prop pullers trying to get it off.

At this point, we’re way beyond the routine remove-and-replace inspection originally discussed. Sometimes years of neglected maintenance don’t reveal themselves until you start taking things apart. Capri Tools DEWALT Milwaukee Tool GEARWRENCH Tools Harbor Freight

08/10/2026

**Bayliner Won’t Go Past 2,800 RPM… Then We Checked the Oil 😳**

This 1995 Bayliner was only reaching around 2,800 RPM at WOT and refusing to get on plane.

What started as a basic power-loss diagnostic quickly turned into multiple problems… including a crankcase full of gasoline.

Sometimes one symptom doesn’t mean one problem. 🔧

08/08/2026

Nothing fancy here. Clean it up, add a little sealer, keep it square, and convince it to stay there.

08/02/2026

Quick MerCruiser gimbal bearing removal using a slide hammer. Five hits, clean extraction, seal untouched. Simple jobs are always satisfying. 👌⚓ Capri Tools Milwaukee Tool DEWALT GEARWRENCH Tools Harbor Freight

07/21/2026

Using a small drill bit to clear the speedometer pitot tube will fix most MPH gauge issues.

You don't even need a drill. If you're worried about damaging it, just twist the drill bit gently with your fingers to clear the blockage. 🔧🛥️

18,000 followers 💥 . That’s pretty wild.I appreciate every one of you who’s chosen to follow along. Whether you’re here ...
07/20/2026

18,000 followers 💥 . That’s pretty wild.

I appreciate every one of you who’s chosen to follow along. Whether you’re here to learn, laugh, or just watch another boat come back to life—thank you.

We’ve got a lot more wrenching to do.

🔧🛥️ Capri ToolsDEWALTMilwaukee ToolGEARWRENCH Tools

07/19/2026

What do you use this for ? DEWALT GEARWRENCH Tools Milwaukee Tool Capri Tools The Home Depot

07/16/2026

We got the call to resurrect this 1997 Centurion after 13 years of indoor storage.

The owner put in the work before we arrived—new battery, old fuel siphoned out, and fresh trailer tires. From there, I replaced the impeller, fuel/water separator, engine oil and filter, and transmission fluid.

She fired right up like it had been run yesterday.

With only 203 hours on the meter, this boat honestly looks like it just rolled off the showroom floor. It’s not every day you get to bring one back to life in this kind of condition.

Huge thanks to the owner for trusting Selby Marine Solutions with the resurrection. Jobs like this are a reminder of why I love what I do. Capri Tools DEWALT Harbor Freight Milwaukee Tool GEARWRENCH Tools

07/15/2026

Every marine tech knows that burned gear oil smell is one you’ll never forget. Harbor Freight DEWALT Milwaukee Tool GEARWRENCH Tools

07/13/2026

Here’s a crusty boat with a crusty starter replacement for ya Capri Tools DEWALT Milwaukee Tool Harbor Freight GEARWRENCH Tools

Address

Reno, NV
89512

Website

Alerts

Be the first to know and let us send you an email when Selby Marine Solutions LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Selby Marine Solutions LLC:

Shortcuts

Share

Category