Clicky

Done Did It Motorsports

Done Did It Motorsports Automotive performance for the budget minded!

Operating as usual

08/30/2017

Due to family emergency please expect slow response times and limited availability. Will update as soon as possible. Thank you for your patience and your business!!!

07/31/2017

This is just a quick update, pending completion of an unexpected bit of flood damage from last week's storms Lonesome Trail, DDIM etc are temporarily closed and all current projects will be delayed while we do a bit of repair to the shop.

Thanks for everyone's patience and understanding.

Here's a freebie for the Blue Oval folks brought to you by my other shop Automotive Second Chances.Whether you are in ne...
12/30/2016

Here's a freebie for the Blue Oval folks brought to you by my other shop Automotive Second Chances.

Whether you are in need of an inexpensive air cleaner solution to a cracked air box, or you're looking to free up a few horsepowers and improve economy, there is an off the shelf MAF sensor housing to cone filter adapter made by Spectre Performance, part #8145, which adapts the factory MAF housing to a 4" inlet air filter.

In the case of this Town Car replacing the broken air box lid would have cost the same or more than this adapter/filter setup, so installing the latter is sort of like having your cake and eating it too.

This car did pass Maricopa County, AZ emissions with this setup, but please check and abide by your local emissions laws before modifying your vehicle.

As an aside, the Spectre adapter does not have a gasket for use between it and the MAF housing, but a thin bead of RTV solves that minor oversight.

Before, during and after porting an intake plenum/elbow for a Ford 4.6L V8 out of a Grand Marquis.Unlike Mustangs, there...
10/14/2016

Before, during and after porting an intake plenum/elbow for a Ford 4.6L V8 out of a Grand Marquis.

Unlike Mustangs, there's not a huge aftermarket for the Panther platform or trucks for these type parts, so having a shop port them is about the only option.

You can see the original casting is pretty rough, has lots of ridges, edges, machining marks, and a near 90 degree short side radius.

The finished product removed and smoothed/polished as much of the casting as possible, while removing the gnarly double ridge drop off short side and smoothing/tapering it as much as practical. The inlet is also opened to 70mm in anticipation of a future aftermarket throttlebody, and the outlet is smoothed out to match the intake manifold opening, making sure there's no interference with the gasket surface, which would be bad.

Address

Queen Creek, AZ
85142

Alerts

Be the first to know and let us send you an email when Done Did It Motorsports posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Nearby autos & automotive services


Other Automotives in Queen Creek

Show All