DM Motorsports

DM Motorsports Speed shop

Crank installed in the 351W. Should finish the rotating assembly tomorrow.
06/23/2017

Crank installed in the 351W. Should finish the rotating assembly tomorrow.

Just in...this 2000 LS1 out of a Firebird Formula. It'll be awhile before we get to this one.
06/22/2017

Just in...this 2000 LS1 out of a Firebird Formula. It'll be awhile before we get to this one.

351W looking good in her new Dark Corporate Ford Blue.
06/19/2017

351W looking good in her new Dark Corporate Ford Blue.

Finally it's back. Should start working on it this week.
05/09/2017

Finally it's back. Should start working on it this week.

Dropped off the 351 parts and... my third block for my 355 build. Hopefully this one will be good and we can finally get...
04/06/2017

Dropped off the 351 parts and... my third block for my 355 build. Hopefully this one will be good and we can finally get that damn project going too!

Finally some progress on the 351W. Pistons, rings, and bearings. Heading up to the machine shop for balancing. Should ha...
04/05/2017

Finally some progress on the 351W. Pistons, rings, and bearings. Heading up to the machine shop for balancing. Should have it back in a few days for assembly!

The Trans Am is back on the road! New converter, new O2 sensors, a new pinion bearing and seal. And the guys say it is r...
03/20/2017

The Trans Am is back on the road! New converter, new O2 sensors, a new pinion bearing and seal. And the guys say it is running great.

Lots of work on the Trans Am. Got the transmission out, installed the new Circle D torque converter, got the rear main s...
03/06/2017

Lots of work on the Trans Am. Got the transmission out, installed the new Circle D torque converter, got the rear main seal replaced, clearanced the transmission tunnel (with a tapping device LOL) for better access to the bellhousing bolts, and moved the left-hand oxygen sensor to a better place. Got to use all the big boy toys today! Next week it will all go back together.

They even put your name on it too. It's the little things, I guess...
03/02/2017

They even put your name on it too. It's the little things, I guess...

03/02/2017

Got my new Circle D torque converter today. Pretty fancy if you ask me! But then again, I drink Pabst Blue Ribbon beer so...

The 351W is off to the machine shop.
02/23/2017

The 351W is off to the machine shop.

Finally the Trans Am gets some traction!
02/22/2017

Finally the Trans Am gets some traction!

These three guys are back again to help get the Trans Am down to that 7.5 second 1/8th mile! Today, we did an injector b...
02/13/2017

These three guys are back again to help get the Trans Am down to that 7.5 second 1/8th mile! Today, we did an injector balance test, installed new injector O-rings, replaced the spark plugs, and got a quick data log. Next week, the trans comes out for a rebuild and a converter install.

Our new project is 351W out of a 69 Mustang. We got it tore down today and the next stop will be the machine shop. Once ...
02/02/2017

Our new project is 351W out of a 69 Mustang. We got it tore down today and the next stop will be the machine shop. Once we get it back, we will have new parts ordered ready to build this thing up! If you are a fan of these old Windsors, stay tuned.

New project coming into the shop...Stay tuned for updates once it arrives.
01/31/2017

New project coming into the shop...Stay tuned for updates once it arrives.

New tool to play with.
01/21/2017

New tool to play with.

12/21/2016

The DM Motorsports fleet getting a winter warm-up.

Update on the 05 Impala. The source of the squealing noise was the separator plate between the Hub and the spindle. Bent...
12/06/2016

Update on the 05 Impala. The source of the squealing noise was the separator plate between the Hub and the spindle. Bent the tabs out of the way and she's good to go. Not sure how they got bent, but that's what it was.

11/04/2016

New struts and now this. But only in reverse! We will get to the bottom of it!

2005 Impala about to get some quick struts.
09/08/2016

2005 Impala about to get some quick struts.

Track prep for the 85 Trans Am! Video soon!
09/02/2016

Track prep for the 85 Trans Am! Video soon!

DM Motorsports's cover photo
08/26/2016

DM Motorsports's cover photo

07/28/2016

Somewhere in Mexico...

The posi install is complete! New axles, axle bearings, and axle seals. (The fourth gen posi required 28 spline axles.) ...
07/28/2016

The posi install is complete! New axles, axle bearings, and axle seals. (The fourth gen posi required 28 spline axles.) But the best news of all was finding out that what we thought were 3.23s is actually 3.42s! So maybe that Craigslist find wasn't so bad after all. Except for the ol' open diff and 26 spline axles. But that's all in the rear view now!

DM Motorsports's cover photo
07/22/2016

DM Motorsports's cover photo

So long, old pal. The air hammer has died. And that's okay because I need a better one anyway!
07/22/2016

So long, old pal. The air hammer has died. And that's okay because I need a better one anyway!

Installing a posi from a fourth gen Camaro. Donuts anyone?
07/21/2016

Installing a posi from a fourth gen Camaro. Donuts anyone?

This brake drum did not go without a fight! This is why you don't just "throw some shoes in it" if the brake drum is wor...
07/20/2016

This brake drum did not go without a fight! This is why you don't just "throw some shoes in it" if the brake drum is worn without turning or replacing the drums. The shoes looked brand new and the ridge on this drum is at least an 1/8th of an inch. The only way it came apart was in pieces! So now, it's all new hardware, shoes, and a drum.

07/19/2016

Pressing in wheel studs.

Back on cousin Pat's GMC (as it has many issues). We tackled the power seats and the horn as both were INOP. Horn circui...
07/11/2016

Back on cousin Pat's GMC (as it has many issues). We tackled the power seats and the horn as both were INOP. Horn circuit had a blown fuse. Tested the horns and they checked out good (they only pulled 4 amps and some change well below the 15 amp fuse rating.) New fuse and it's good to go.

The power seats were not working. Traced it down to an open between a connector under the dash where the power supply split into the two main feeds going out to each seat. Repaired the wires and the seats are good to go.

Laughing at myself on this one! Apparently the Generic Electronic Module needs 45 minutes to "go to sleep." Going to mon...
07/07/2016

Laughing at myself on this one! Apparently the Generic Electronic Module needs 45 minutes to "go to sleep." Going to monitor the battery voltage for the next week to be sure. Might have to limit how much the kids play in the car!

The 2003 Mustang GT appears to have a parasitic draw. Now we get to find it!
07/07/2016

The 2003 Mustang GT appears to have a parasitic draw. Now we get to find it!

Address

13609 S 46th St
Papillion, NE
68133

Telephone

(402) 740-8714

Alerts

Be the first to know and let us send you an email when DM Motorsports posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Videos

Nearby autos & automotive services


Other Automotive repair in Papillion

Show All

Comments

Representing DM Motorsports.