08/24/2026
๐ฅ CONTENDER 30 ST | TWIN YAMAHA 300s | NIZPRO 332HP TUNE ๐ฅ
Another successful tune by Suncoast Outboard Tuning โ this time on a Contender 30 ST powered by twin Yamaha 300s.
We installed the Nizpro Marine 332HP tune, taking the twins from a combined 600HP to 664HP!
And the results were impressive:
โก Faster Holeshot
๐ Stronger Mid-Range Acceleration
โฝ Fuel Savings Throughout the RPM Range
๐ฐ Up to 20% Fuel Savings at 4,400 RPM
๐ฅ +64 Total Horsepower
We also found some additional performance just by changing how the boat was being run.
The owner typically runs with the engines trimmed all the way down. By adding just a little positive trim:
Before: 5,200 RPM / 58 MPH
After: 5,600 RPM / 63 MPH
Thatโs a 5 MPH increase just by adding some positive trim and getting the boat into a better running attitude.
And there may still be more available.
The current prop setup is only allowing the engines to turn around 5,600 RPM. A prop change that lets these engines get closer to the 6,000 RPM range could potentially improve both speed and cruising efficiency even further.
This is exactly why we donโt just flash an ECU and call it done. We want to see how the boat performs and help the owner get the most out of the entire setup.
This Contender is also equipped with , and what a difference it makes. The boat cuts through the waves incredibly well and feels exceptionally solid and planted on the water. Contender Boats are already great fishing platforms, but combined with the additional power, stronger mid-range and improved efficiency from the NIZPRO tune, this is one impressive offshore setup.ย
โ๏ธ. suncoastoutboardtuning is an
Authorized Nizpro Marine dealer
โ
Mobile & On-Site Tuning
๐ฆ Remote/Mail-In ECU Tuning Available
โ๏ธ Tunes available for Yamaha, Suzuki, Mercury, Tohatsu & Honda
๐ Serving Floridaโs Gulf Coast and beyond
More horsepower. More torque. Better holeshot. Stronger mid-range. Improved fuel efficiency.
๐ฉ Message us to see whatโs available for your outboard.