JCS Fabrication

JCS Fabrication Performance automotive and industrial fabrication.

JCS Fabrication designs and builds custom automotive parts, as well as unique components for several other fields of interest.

10/03/2017

I'm currently in the process of building a new shop, so any new orders are on hold for at least a couple of months. With that said, I have one standard VS3 catch can with -8AN inlets, -10AN outlet, and standard mounting bracket that was a cancellation, ready to ship.

Price is $200 including priority shipping to CONUS.

Send an email to [email protected] with "catch can" in the subject if interested. First come, first served!

I get a lot of PM's and emails with questions on these catch cans and crankcase ventilation in general, so I thought I w...
04/24/2016

I get a lot of PM's and emails with questions on these catch cans and crankcase ventilation in general, so I thought I would post a link to an article I wrote several years ago. It was written specifically for the DSM 4G63T platform, but a lot of it applies to the majority of boosted engines.

http://www.dsmtuners.com/forums/articles-engine-fuel/366890-4g63t-pcv-system.html

Introduction With very few exceptions, no topic generates more debate than the PCV system used on our turbo DSMs. I think it is mostly because of the...

Nice VS3 with 3" sight tube.Special thanks to Paul Williams and Affordable Coating Solutions - ACS here in Oklahoma City...
02/26/2016

Nice VS3 with 3" sight tube.

Special thanks to Paul Williams and Affordable Coating Solutions - ACS here in Oklahoma City, for a fantastic (and quick) black wrinkle powder coat!

01/06/2016

Hope everyone had a happy holiday break!

I've been asked several times if I am still making the 1G DSM fuel pump hangers. The answer is...sort of. :)

With the holidays, two ice storms (with a lot of tree damage), and extended power outages, I'm still digging out from some catch cans that I'm running behind on. But as soon as those are caught up, I'll be working on a new design for the hangers that will allow a change from a dual 255 setup to a single walbro 450 (or similar) setup, simply by swapping out the lower post.

I don't have an ETA yet or know for sure if it will even become official, but some prototype parts are being made even as we speak. As soon as I have more info or details I'll let everyone know.

Stay tuned!

01/01/2016

Happy New Years everyone!

Starting to make a dent and get caught up a little... just in time for Christmas.
12/10/2015

Starting to make a dent and get caught up a little... just in time for Christmas.

I can always tell when racing season is winding down and people start working on their cars over the winter. Gonna be a ...
11/03/2015

I can always tell when racing season is winding down and people start working on their cars over the winter. Gonna be a busy few months! (y)

06/23/2015
VS3 with optional breather for OTA use, and 3" sight tube.
06/02/2015

VS3 with optional breather for OTA use, and 3" sight tube.

Doin' work!
04/25/2015

Doin' work!

So sad to hear that DevilsOwn Alcohol Injection founder and owner Chance McClurkin has passed away.RIP Chance. You will ...
02/12/2015

So sad to hear that DevilsOwn Alcohol Injection founder and owner Chance McClurkin has passed away.

RIP Chance. You will be missed.

Chance spent his birthday in bed, thinking he had the flu. Instead he's found himself in the ICU at a nearby hospital with seizures, spinal blockage, and a mass on his brain. Tests are being run, the doctors and nurses are taking every measure to ensure his recovery, and his wife and children are...

Address

Oklahoma City, OK

Alerts

Be the first to know and let us send you an email when JCS Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to JCS Fabrication:

Share