ECMFab Welding-Fabrication

ECMFab Welding-Fabrication I've been welding and working with metal for 20 years now. I've always enjoyed creating things, and have been able to do a lot more of it lately!

Since it looks like today is the day the car is getting sold, all my blood sweat and tears to make this 53 way better th...
01/30/2024

Since it looks like today is the day the car is getting sold, all my blood sweat and tears to make this 53 way better than the way Rich got it. I completely redesigned the whole rear suspension with all heavier components and materials. The geometry was all wrong, and he kept snapping the 2 link. I made a new 2 link, and added a panhard bar. Last 2 pics show what a hack job it was when it came over to my house. We put in just shy of 2 years of nights when we could get together to make progress on this thing. Another concern was the fuel tank was sitting on the ground when the air was released from the bags. I raised the tank up in the trunk and made a new curb and floor. I had to hand shape panels in the wheel wells to connect the metal to the flat steel for the air bag compressors and tank. I made a pass thru compressor tank drain to empty on the ground. I made mounts for the solenoids to be hidden with all the lines super clean. We then sprayed the whole trunk with textured bed coating to get it looking legit. I was very happy with the end result, and can say it left my hands WAY better than when I got to it. Off to the pasture she drives. #53

Pics of another fire pit I made for a different Indian Princess Tribe. They loved the other one I made so much, they put...
08/30/2018

Pics of another fire pit I made for a different Indian Princess Tribe. They loved the other one I made so much, they put in an order! Next!

Holy smokes this thing has kicked my butt. Too many angles!! I wanted to make a 3 tiered, cascading shelf for the corner...
08/29/2018

Holy smokes this thing has kicked my butt. Too many angles!!

I wanted to make a 3 tiered, cascading shelf for the corner of the office at GoJump. This is for folded t shirts for sale.

I have the frame all finished up now. I need to fine tune a couple dress up parts like a dimple die panel at the bottom, but I have everything measured, mostly permanently welded, sanded, blended, and set now.

What I didn’t realize when I started this project is that each airplane tail is angled, curved, and even tapered differently from each control surfaced to the next. This was a pain to get them all to match up in the end, and still have a relatively close gap in between them! Also, the underside supporting frame of each tail, I needed to angle to allow the top surface to remain flat, and even follow the exact leading edge at the same angle as the tails when looking directly at them... (Thanks Tony Dyas English for teaching me the right way to do exhaust systems on cars and always have the same angle as the next pipe on duals, and always follow the frame. This has made me a perfectionist in everything I’ve built in my life. Or at least as perfect as I can get something.)

I know it doesn’t look like much, but I have finally gotten a vision on how I want to complete this project and what colors to run to tie this together with the other aircraft inspired furniture in the building. Phewwwwwww.

I made a fire pit last night for my buddie’s daughter’s YMCA Indian Princess Tribe. Their old one was too dang small and...
02/01/2018

I made a fire pit last night for my buddie’s daughter’s YMCA Indian Princess Tribe. Their old one was too dang small and fell apart so we went bigger and just added a little extra touch to it. It’s all 3/16 steel so it’s pretty heavy but will actually last now. We made the mount for the pit to get tied to the front of their gear trailer too. I had the sides water jetted from a local shop then slapped it all together last night including the mount in a couple hours.

The sign came out freaking cool, and how I imagined it in my head. Jose and I knocked this out last night. I guess we ar...
09/23/2017

The sign came out freaking cool, and how I imagined it in my head. Jose and I knocked this out last night. I guess we are sign guys now!

New interior logo about to go up in GoJump in the next couple days. Water-jetted mirror finish stainless with 3" standof...
09/20/2017

New interior logo about to go up in GoJump in the next couple days. Water-jetted mirror finish stainless with 3" standoffs, over reclaimed wood backing. Hope my vision comes out proper. Stay tuned for updates.

Got to knock out another airplane ramp with Eric Brosh the last couple nights. Another happy Pac750!
09/07/2017

Got to knock out another airplane ramp with Eric Brosh the last couple nights. Another happy Pac750!

Slammed together this awning in Cardiff today with Eric Brosh. Fun project!We do it all!
08/23/2017

Slammed together this awning in Cardiff today with Eric Brosh. Fun project!

We do it all!

PAC 750 front wheel ramp completed and painted!
06/18/2017

PAC 750 front wheel ramp completed and painted!

Another project done. Make a ramp for the front wheel of the airplane to make it foolproof so that the wings and tail do...
06/12/2017

Another project done. Make a ramp for the front wheel of the airplane to make it foolproof so that the wings and tail don't hit the hangar. Lifting up the front wheel dipped the back of the plane down and allows everything to clear nicely. We are going to add a winch and make it so one person can pull this thing in by themselves.

ECMFab does handrails too! No job too small.
05/23/2017

ECMFab does handrails too! No job too small.

Address

Oceanside, CA
92049, 92051, 92052, 92054, 92056–92058

Website

Alerts

Be the first to know and let us send you an email when ECMFab Welding-Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Featured

Share

Category