TedSpec

01/22/2026

https://x.com/DOJEnvironment/status/2014092628753551729?s=20

01/20/2026

Hey folks, only doing tunes and ecu socketing or cap replacement services until further notice. I appreciate everyone's business and support over the years.

07/19/2023

1GB with what shows less than 60k on the odometer. Stock capacitors support that evidence as they barely show any signs of leakage, if any.

01/19/2023

Its been a rocky month setting up the new shop space, but its getting there.

07/29/2022

All the AWDs!

07/20/2022

Sometimes the needs a little help. Mostly all the time though.

https://fb.watch/eo0rER4GUN/

03/09/2020

TedSpec customer support and service may experience a delay in communication starting March 11th through the 17th. Please be patient and we will respond to you in the order your questions are received. Thank you.

01/29/2020

Stainless steel filter baskets are a game changer for E85 fuel. This should be an industry standard over the nylon/plastic filter baskets your fuel injectors come with. You can look into your injectors and see the screens falling apart after a few months of E85 use. If you need your injectors serviced or upgraded, please send a message and we'll get them done.

11/07/2019

Saving 1 DSM at a time from catastrophic failure. Balance shaft belts are a necessary maintenance item when doing a timing belt. Mitsubishi recommends 60K intervals, but if you drive your car aggressively, I recommend doing it 10k sooner. Need this service performed? Send a message for pricing and scheduling.

10/28/2019

Impressed by these estimated VD horsepower numbers on a STOCK 7 bolt shortblock with HKS 272/272 cams a tired hta68 V1 turbo and a front mount. Runs on 91 octane with a little methanol injection. "Should" crack some mid 12s or better with traction. If you need tuning, maintenance, fabrication, parts, or a build plan, send a message and we can discuss options for your setup, and your budget.

10/23/2019

I want all of them to run, forever.

10/15/2019

Wiring finally setup for the welders. Still organizing and setting up!

“Got the headquarters close to being fully operational. https://t.co/W1nq9LNZZY”