Crock's Rod Shop

Crock's Rod Shop One man Hot Rod Shop
Open - if shop door is open come on in. Welding, fabrication, etc. Gear head ideas & Old car stories shared

Cleaned up workbench, and area around it. Then I assembled spindles caliper brackets and steering arms.
04/19/2026

Cleaned up workbench, and area around it. Then I assembled spindles caliper brackets and steering arms.

My current project, 1955 with Camaro subframe clip. Installed some gussets and rewelding.then cleaned it up and painted....
04/18/2026

My current project, 1955 with Camaro subframe clip. Installed some gussets and rewelding.then cleaned it up and painted. Installing tubular A -arms, dropped spindles. Larger sway bar, power steering, power brakes. Then new steering columns, wiring harness, S.S. Brake lines, new fuel lines.

Just about finished with deck. Next is to load it up and make more room to work on my cars. The 34 Chevy is calling out ...
09/08/2025

Just about finished with deck. Next is to load it up and make more room to work on my cars. The 34 Chevy is calling out to me!

Finishing up deck at back of shop. More storage options.Then on to 34 Chevy & 65 c10.
08/24/2025

Finishing up deck at back of shop. More storage options.
Then on to 34 Chevy & 65 c10.

New wheels for the 28 roadster pick-up. What center caps should I use?
01/24/2025

New wheels for the 28 roadster pick-up. What center caps should I use?

Getting some much needed work done on the shop. Getting the rest of the walls insulated. Slow go for this one man crew. ...
01/24/2025

Getting some much needed work done on the shop. Getting the rest of the walls insulated. Slow go for this one man crew. I’ve got an HVAC unit to install, but need to finish insulation first.

06/03/2023
Shop is crowded, need more room! Really need to finish some projects!
05/11/2023

Shop is crowded, need more room! Really need to finish some projects!

Narrowed a 8.8 rear end, first time to do it. Turned out great!!!
04/05/2022

Narrowed a 8.8 rear end, first time to do it. Turned out great!!!

Making some progress! Firewall is going to work out well. Tight, tight at transmission, shift linkage setting on bottom ...
04/02/2022

Making some progress! Firewall is going to work out well. Tight, tight at transmission, shift linkage setting on bottom fl**ge of x-member! Not a lot of room for clutch & brake pedal, but I’ll make something work.

Address

Newark, TX

Website

Alerts

Be the first to know and let us send you an email when Crock's Rod Shop posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share