RSD Fabrication & Welding, LLC

RSD Fabrication & Welding, LLC RSD Fabrication & Welding delivers high-quality custom welding, fabrication, and metal repair services throughout Beaufort, SC and surrounding areas.

Known for the custom-built “Crewmanche”.

📍 Lady’s Island, Beaufort, SC
📩 Message us for a quote We can do all things fab for anything with wheels.
- General welding and repair work
- Aluminum, stainless steel ,mild steel
- Aluminum boat repairs
- Roll Cages
- Axle Swaps
- Custom Link Suspensions
- Frame Reinforcement & Repair
- Bumpers, Tube Fenders, and Body Armor
- Steering Upgrades
- Exhaus

t
- Lift Kit and Accessory Installs & Upgrades
- Troubleshooting, Service & Diagnostics


Need something done? Call or email, we'll be happy to talk with you about your project.

Brush hog repair a few weeks ago. Cut out all the bent and bad material. Templated off other side and cut out new sectio...
08/12/2026

Brush hog repair a few weeks ago. Cut out all the bent and bad material. Templated off other side and cut out new section of 3/16 plate. Cut off old ware plate mount and reinstalled repaired a bunch of cracked welds throughout the unit.

Enclosed trailer gate repair. Always nice to work smarter not harder. Bottom angle of door was torn in two locations. Cu...
08/12/2026

Enclosed trailer gate repair. Always nice to work smarter not harder.

Bottom angle of door was torn in two locations. Cut out and prep for replacement.

Rotted section of main frame. Cut out and sectioned in new steel.

Made a little jig to hold all the hinges in the same location. Installed 4 HD hinges in place of the 2 for extra strength.

New bottom door angle installed.

Test fit and alignment check before welding.

Hinges welded out.

All done. Thank Plair lawn care for continued business.

Fabricated this brush guard for this John Deere 5075e. The lower section is removable if counterweights are needed. ...
08/12/2026

Fabricated this brush guard for this John Deere 5075e. The lower section is removable if counterweights are needed.

reached out to me and offered to send me a pair of boots — no pressure, no requirement, just try them out. They sent m...
05/27/2026

reached out to me and offered to send me a pair of boots — no pressure, no requirement, just try them out.

They sent me the new Ohman’s in the moc toe style, and after wearing them for the last two weeks, I can honestly say I love them.

This is actually my third pair of Brunts. I’ve owned two pairs in the past and had a great experience with both. These new Ohman’s fit great, feel great, and were comfortable right from the first time I put them on — no long break-in period, no foot pain, just solid work boots.

I’m hard on boots between welding, fabrication, shop work, and job sites, so comfort and durability matter. So far, these have been excellent.

Appreciate for sending them out. I’ll keep putting them to work.

Custom aluminum ladder fabricated for a 27’ Carolina Skiff Sea Chaser. Built to provide safer access while launching an...
05/17/2026

Custom aluminum ladder fabricated for a 27’ Carolina Skiff Sea Chaser. Built to provide safer access while launching and loading solo.

Made to fit the customer’s trailer and boat setup.

Need something custom built for your boat, trailer, truck, or equipment? Reach out to RSD Fabrication & Welding LLC.

Not a bad way to break in the new shop. Got "Mr. Mojo Risin" — a 27ft Carolina Skiff Sea Chaser — sitting pretty inside…...
05/03/2026

Not a bad way to break in the new shop. Got "Mr. Mojo Risin" — a 27ft Carolina Skiff Sea Chaser — sitting pretty inside… while we’re underneath putting in work 🔧🔥

Building another custom ladder to make it easier and safer for the customer to climb aboard. This is exactly why we built the space—room to take on bigger jobs and do them right.

04/30/2026

Downpipes and a custom-fit X-pipe on this AMG GLE 63 🔥

This one sounds mean—what do you think?

AMG GLE 63 down pipes install, mid muffler delete and add a 3” X pipe on its place.
04/25/2026

AMG GLE 63 down pipes install, mid muffler delete and add a 3” X pipe on its place.

C5 Corvette exhaust upgrade featuring long tube headers, an X-pipe, and a custom axle-back system.Speed Engineering head...
02/04/2026

C5 Corvette exhaust upgrade featuring long tube headers, an X-pipe, and a custom axle-back system.

Speed Engineering headers and X-pipe provided an excellent fit, paired with mufflers and a custom-fabricated outlet to match the customer’s specifications.

Final result came out clean with a great sound—the customer was very satisfied! custom.

Happy birthday Jack. Can’t believe he’s 6 already.
01/28/2026

Happy birthday Jack. Can’t believe he’s 6 already.

Address

Huntington
New York, NY

Opening Hours

Monday 8am - 8pm
Tuesday 8am - 8pm
Wednesday 8am - 8pm
Thursday 8am - 8pm
Friday 8am - 8pm
Saturday 8am - 8pm
Sunday 8am - 8pm

Telephone

+16316783219

Website

Alerts

Be the first to know and let us send you an email when RSD Fabrication & Welding, LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to RSD Fabrication & Welding, LLC:

Shortcuts

Share

Category