Oddballs rods & customs

Oddballs rods & customs small town Hotrod shop! maintenance, rust repair, wiring, custom bodywork!!!

Baby steps! Firewall fits nice and tight and ready to start the little kick out for the transmission tunnel! Then I can ...
09/21/2023

Baby steps! Firewall fits nice and tight and ready to start the little kick out for the transmission tunnel! Then I can pull the engine and get them swapped out and ready to run!!!

Been getting after it hard this week or so on this awesome Mazda minitruck project!! Made custom ..... Well ... Everythi...
09/14/2023

Been getting after it hard this week or so on this awesome Mazda minitruck project!! Made custom ..... Well ... Everything 😂😂. Lower bag on bars setup all figured out and just have to finish weld up a bunch of stuff and figure out the upper link setup as well as shocks! I'm personally loving how it's turning out!

Late nights in the shop are sometimes good for the soul!!
09/14/2023

Late nights in the shop are sometimes good for the soul!!

Almost done!! All the braces are in !! Man this thing is getting heavy!!! All 3/16 thick steel ! 2x4, 2x3 , 2x2 , 1" thr...
09/02/2023

Almost done!! All the braces are in !! Man this thing is getting heavy!!! All 3/16 thick steel ! 2x4, 2x3 , 2x2 , 1" threaded rod for adjustable feet for making sure she's level and it'll have previsions for using trailer ramps on it to load and unload chassis's . I will have to put a jack stand under the end when loading/unloading the table and might put in a floor anchor and a place on the front of the table to secure it for extra safety! I'm excited to put it to use!!!

Not saying I'm super strong but my back definitely hurts 🤣😭🤣🤣 now to weld all the bottom and add all the braces I cut an...
09/01/2023

Not saying I'm super strong but my back definitely hurts 🤣😭🤣🤣 now to weld all the bottom and add all the braces I cut and cleaned yesterday

My brother from another mother Mike Abbott from Steel Rose metal co , out here on the newest Clay millican YouTube reppi...
08/28/2023

My brother from another mother Mike Abbott from Steel Rose metal co , out here on the newest Clay millican YouTube repping my shop shirt!! Appreciate the exposure brother!!

This kind of work is just unacceptable! Very dangerous and not to mention ugly !!
08/21/2023

This kind of work is just unacceptable! Very dangerous and not to mention ugly !!

Got the 52 Jaguar back under the knife 🔪 to get it save to be on any road again!!!
08/19/2023

Got the 52 Jaguar back under the knife 🔪 to get it save to be on any road again!!!

1980 f100 restoration all wrapped up, customer can finish up the couple parts that haven't come in/ didn't order in time...
08/19/2023

1980 f100 restoration all wrapped up, customer can finish up the couple parts that haven't come in/ didn't order in time lol Eastwood single stage paint did very well

Made a little progress on this Mazda pickup chassis! Measure 12 times cut twice or something like that 😂😂
07/24/2023

Made a little progress on this Mazda pickup chassis! Measure 12 times cut twice or something like that 😂😂

Seats all mounted , carpet trimmed and new door sill plates in, radio mounting plate and everything done on the dash exc...
07/24/2023

Seats all mounted , carpet trimmed and new door sill plates in, radio mounting plate and everything done on the dash except the heater stuff that's all going to be replaced. Did a new glove box liner and added a glove box light and a couple USB ports in the glove box!

Working on some rust repair today!
07/24/2023

Working on some rust repair today!

Address

Memphis, TN

Telephone

+19015008027

Website

Alerts

Be the first to know and let us send you an email when Oddballs rods & customs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Oddballs rods & customs:

Shortcuts

Share

Category