Texoma Machine and Performance

Texoma Machine and Performance Located in the Texoma area, we offer engine machining and building for everything from stock daily drivers, to your high performance race engine.

08/07/2021

TMP is downsizing and moving! We decided to have a "fire sale" this weekend only to get rid of alot of stuff so we don't have to move or store it. LOTS of new and used parts. Equipment as well! Everything will be SUPER cheap! 50-60% off new parts, used stuff, engine stands, etc are negotiable!
Please share and watch the video!
We will likely be up there most of the weekend, call or message to make sure we will be there before coming to browse. Thanks!

My wife Sidni gets in on the action too 😏
04/13/2021

My wife Sidni gets in on the action too 😏

02/23/2021

GIVEAWAY! $25 Walmart gift card. It's not much but it should help someone out and be fun 😁
1. Guess the total weight of the scrap metal and comment it here on the original post!
2. Share the post
3. Like the page.
Winner will be chosen Friday the 26th at noon.

I have a few blocks that I need to get rid of in the next 2 days, or they are gone. Cheap, make an offer. A description ...
02/22/2021

I have a few blocks that I need to get rid of in the next 2 days, or they are gone. Cheap, make an offer. A description is in the pics, followed by 2 pics of said block. Restoration guys? Old school hot rodder? 305 circle track class racer for the 305? Or scrap.

1. Standard bore small journal 327 SOLD
2. 63-64 Ford 260 V8
3. Ford 5.4 modular
4. 1 pc seal roller 305 SBC
5. 4.155 bore 400" SBC

We wrapped up a really nice turbo LS build for a friend and customer this week. This 5.3 based build is filled with some...
01/20/2021

We wrapped up a really nice turbo LS build for a friend and customer this week. This 5.3 based build is filled with some of the best parts available.
Molnar Technologies Crank and rods
Texas Speed & Performance SR1 intake and PRC 220 heads
Cam Motion custom hydraulic roller
Johnson Lifters
Wiseco Automotive TSP boost pistons
CHE Precision Inc. Trunnion upgrade
Trend Performance Products Pushrods
Cometic Gasket, Inc. Head gaskets and
ARP Studs throughout
And more.

The new TSP SR-1 next to the High ram. SR-1 has around an extra 1.5" of hood clearance (last two pics show measurements)...
01/06/2021

The new TSP SR-1 next to the High ram.
SR-1 has around an extra 1.5" of hood clearance (last two pics show measurements), with lots of plenum volume still yet.
We are excited to put both in action. Unfortunately we will not be able to do any back to back testing. Still cool to see them side by side. Hope everyone is staying safe out there!

11/21/2020

It seemed like a day to deck LS blocks i suppose. It's surprising still yet how far out some of these blocks are. One had .007" taper on one bank, another had a .006" low spot between two cylinders. We will make them right. Ya'll have a good weekend 🤙

Don't be that guy, let us help! Shoot us a message if you need any parts or help with an upcoming build 🤙Frankenstein En...
09/15/2020

Don't be that guy, let us help!
Shoot us a message if you need any parts or help with an upcoming build 🤙
Frankenstein Engine Dynamics LLC
Holley



09/09/2020

A customer and friend is selling his Cobra jet headed 514" Ford turn key! The engine makes good power, sounds great, and is very reliable. Comes with extra parts as well! Pics in the comments.

514 carb to pan w/ headers $5,000
Offset ground Ford crank
Eagle rods
Srp pistons
Crane flat tappet cam around .640 lift both sides
O-ringed block
Cobra jet iron heads ( dooer casting)
Dual 750’s
Milodon oil pan
Have an extra tunnel ram and virgin block

Completely gone through 2 seasons ago
Align hone, with new main & rod bearings, cam bearings, piston rings w/ steel top ring, valves lapped and new springs

We finished a twin turbo 5.3 build for the 'Double Nickel' just in time for Texoma Jet Fest 2020. We fixed some issues w...
08/24/2020

We finished a twin turbo 5.3 build for the 'Double Nickel' just in time for Texoma Jet Fest 2020. We fixed some issues with the block and cylinder heads, and went back together with some parts from Molnar, Wiseco, and other choice companies. The boat was running good all day, we are looking forward to seeing what this little engine can do!

Wrapped up a cool little pump gas 555" Chevy this week for an air boat. It should run up those sand bars easy enough 😁
08/02/2020

Wrapped up a cool little pump gas 555" Chevy this week for an air boat. It should run up those sand bars easy enough 😁

💥💥ATTENTION💥💥We just learned that we could have potentially been exposed to the Covid-19 virus, and it has been recommen...
07/15/2020

💥💥ATTENTION💥💥
We just learned that we could have potentially been exposed to the Covid-19 virus, and it has been recommended that we quarantine for the next 14 days. During this time TMP will be closed to the public, in consideration of our customers. If you need to schedule a pick up or drop off some work, please give us a call at 580-624-0960.
Thank you!

Address

Mead, OK
73449

Opening Hours

Monday 8am - 6pm
Tuesday 8am - 6pm
Wednesday 8am - 6pm
Thursday 8am - 6pm
Friday 8am - 6pm

Telephone

+15806240960

Website

Alerts

Be the first to know and let us send you an email when Texoma Machine and Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Texoma Machine and Performance:

Shortcuts

Share

Category