L.A. AutoWerks LLC

09/15/2026

Today we are continuing our job after getting the engine back from the machine shop for this 2011 Toyota Tacoma with the 2.7L engine. A blown head gasket was the initial concern but upon opening up the engine there was piston slap on cyl. 1 and 4 which led to the customer opting for a full rebuild.

01/24/2026

Freightliner Cascadia needing some repairs on the brake S-Cam tube and leaking oil from the air compressor seals. Got everything replaced, resealed, and adjusted. Ready for the road once again

12/02/2025

Customer was experiencing a crank no start condition after his work van just shut off on him while driving. Code scan was pointing to the injection control pressure (ICP) sensor. Sensor verification revealed that the sensor was indeed reading the correct pressure. Looking for the cause of low oil pressure revealed that the injection control regulator (IPR) obtained some damage and was no longer able to regulate flow to build up the required pressure to fire the injectors. Replacing the IPR brought the engine back to life. .0L

05/28/2025

09/30/2024

09/30/2024

Some of the Engine work we have done in the past.

09/30/2024

Customer Purchased parts and called us to install.

01/21/2024

Last couple weeks we’ve been working with a machine shop to try and revive this Dodge 6.1L engine that threw a piston. Crankshaft was repaired, engine block cleaned and checked. Now we’re preparing to put everything back together. Stay tuned! #6.1L

11/02/2023

We are thankful for you! For the month of November take 10% all labor charges. Mention code “Fall Savings” when you book.