01/20/2025
So here’s my product line so far. Reverb coming soon. Taking a break. Not a big reverb user but will build one for myself and one to sell. Circuit is complete, just need to build.
These are not the parts kits you can buy and build your own pedal (which is kinda stupid because they cost nearly the same and you put it together. China gettin’ free labor!).
These are my own circuits. No… I don’t pour the molten aluminum and cast the boxes. But I do drill them out, paint/powder-coat and do what’s necessary to suit my needs.
The circuits and design, all me. I build solid, pretty much “mil-spec” pedals at my workshop located in Long Beach, California.
Just wait ‘til I’m done my guitar amplifier. It’ll be the snaps. I’m building all of my basic effects, including trem and reverb, into the amp itself. All effects will be accessible from the front panel with all adjustments available at your fingertips. You will also be able to use a footswitch to select effects if you wish. 👍
Photos~~~~~~>
Bottom left to right, the first three are $99. The Clean Boost, Green Machine Overdrive. The fourth is the BumbleBee V2 at $129. Top: Trem-$199, Max OD-$169.
🇺🇸
My power jack is mounted to the box. Look at the comparison between the closest box with just a hole and my pedal just behind it. Repeatedly plugging and unplugging the power will break the connection at the board. Not worth $250. Dirt and grime can get in there as well.
Pro tip! You can make any overdrive or distortion sound like any OD or distortion. Just use an EQ pedal after your pedal in the signal chain. 5-band is cool. I use an inexpensive 7-band from Behringer. Adjust it to get any sound you want!