Enviroblasting llc

Enviroblasting llc Eviromentally safe way to remove paint, rust, body filler, from cars, boats, trucks, and grafitti.

Operating as usual

Before and afters of this beautiful Camaro. The silver paint was starting to peel so the customer decided to go with glo...
08/11/2019

Before and afters of this beautiful Camaro. The silver paint was starting to peel so the customer decided to go with gloss black and he did not go wrong they turned out amazing and changed the whole look of the car!

Before and afters of a set of Giavanna wheels off this Mercedes. Two tone gunmetal grey face and gloss black background ...
07/25/2019

Before and afters of a set of Giavanna wheels off this Mercedes. Two tone gunmetal grey face and gloss black background turned out amazing!

Welcome to Enviroblast! We’re all about media blasting, powder coating and... horse baths? Hey everyone should enjoy the...
07/19/2019

Welcome to Enviroblast! We’re all about media blasting, powder coating and... horse baths? Hey everyone should enjoy their Friday afternoon. I know these two are!

Good looking blue called hybrid translucent blue. It’ll be looking great going down the road!
06/27/2019

Good looking blue called hybrid translucent blue. It’ll be looking great going down the road!

Before and after of a 67 Lincoln that came in the shop the other day. It got a full blast inside and out now off for an ...
06/26/2019

Before and after of a 67 Lincoln that came in the shop the other day. It got a full blast inside and out now off for an epoxy primer! Thanks @antiqueautoworks for the business!

A few pictures of a big block intake and a piece his buddy water jetted with his name. The blue is a chrome base with bl...
06/04/2019

A few pictures of a big block intake and a piece his buddy water jetted with his name. The blue is a chrome base with blue translucent hybrid top coat. Thanks again for the business Kevin

Beautiful morning for coffee with my girl!
06/01/2019

Beautiful morning for coffee with my girl!

Before and after of a valve cover and intake blasted and coated in gloss black. It looks so much better now!
05/30/2019

Before and after of a valve cover and intake blasted and coated in gloss black. It looks so much better now!

Another beautiful transformation at Enviroblast this week. Customer dropped off the Jeep and we dismounted, blasted, coa...
05/11/2019

Another beautiful transformation at Enviroblast this week. Customer dropped off the Jeep and we dismounted, blasted, coated in gloss black then remount and balance and it’s back on the road!

Is there anything more satisfying than seeing the old paint and rust just disappear?
05/01/2019

Is there anything more satisfying than seeing the old paint and rust just disappear?

Not blasting or powder coating related but I did get this guy at the shop today! 11” beard and about 23 pounds.
04/23/2019

Not blasting or powder coating related but I did get this guy at the shop today! 11” beard and about 23 pounds.

Before and afters of @kallipaschall milk can. Shined it up really nice thanks Kalli!
04/18/2019

Before and afters of @kallipaschall milk can. Shined it up really nice thanks Kalli!

A little before and after pictures of a driveway that got Enviroblasted yesterday. The coating was supposed to be a clea...
03/19/2019

A little before and after pictures of a driveway that got Enviroblasted yesterday. The coating was supposed to be a clear but it turned white over a period of time so we stripped it off for a new coating to be applied!

Now that is a clevis! This thing weighed about 80 pounds or so!
03/08/2019

Now that is a clevis! This thing weighed about 80 pounds or so!

A little sneak peek of what’s to come on the Enviroblasting truck. It’s gonna be an eye catcher!
02/28/2019

A little sneak peek of what’s to come on the Enviroblasting truck. It’s gonna be an eye catcher!

Got some rusty running boards? Drop them off to me and have them shining like new money! These were blasted the powdered...
02/22/2019

Got some rusty running boards? Drop them off to me and have them shining like new money! These were blasted the powdered with a zinc primer and black 40.

A little bit of wood working yesterday. The possibilities are pretty much endless with blasting. It took the old stain r...
02/20/2019

A little bit of wood working yesterday. The possibilities are pretty much endless with blasting. It took the old stain right off and its ready for a recoat!

Got some four wheeler parts finally done with the nice weather. The colors are smoke gray and super mirror blue!
02/16/2019

Got some four wheeler parts finally done with the nice weather. The colors are smoke gray and super mirror blue!

A little sissy bar action today in gloss black. It’ll be looking good going down the road and last a long time!
02/11/2019

A little sissy bar action today in gloss black. It’ll be looking good going down the road and last a long time!

Really neat old butchers meat hook blasted and powder coated in copper vein. Really neat piece to hang pots and pans off...
12/19/2018

Really neat old butchers meat hook blasted and powder coated in copper vein. Really neat piece to hang pots and pans off of!

Here’s a heavy duty trailer that got a new look at the shop the other day
08/09/2018

Here’s a heavy duty trailer that got a new look at the shop the other day

Before and after pictures of the premier l**e and tire in grain valley that got Enviroblasted the other day
08/02/2018

Before and after pictures of the premier l**e and tire in grain valley that got Enviroblasted the other day

Been doing a lot of powder coating lately. Pictures don’t do it justice but I sprayed a violet chameleon on a four wheel...
04/05/2018

Been doing a lot of powder coating lately. Pictures don’t do it justice but I sprayed a violet chameleon on a four wheeler frame and it turned out incredible!

The possibilities are endless with blasting and here is a perfect example. This customer wasn’t happy with the white pai...
02/01/2018

The possibilities are endless with blasting and here is a perfect example. This customer wasn’t happy with the white paint on his brick wall and contacted me to do the paint removal. In and out in one day and he couldn’t be happier with the new look of his house.

Been doing a lot of powder coating lately! Here is a three wheeler frame that I blasted and powder coated candy red.
12/22/2017

Been doing a lot of powder coating lately! Here is a three wheeler frame that I blasted and powder coated candy red.

Here's some chrome powder coat on an intake for twinfab. Also done were some pulleys and a bell housing not pictured.
07/09/2017

Here's some chrome powder coat on an intake for twinfab. Also done were some pulleys and a bell housing not pictured.

A 71 Blazer got Enviroblasted the other day. This truck originally came out of California and with one coat of paint it ...
05/05/2017

A 71 Blazer got Enviroblasted the other day. This truck originally came out of California and with one coat of paint it blasted beautifully. Hoping to see it when the customer gets it all put back together!

Today at Enviroblast we media blasted and powder coated this Yeti cup in a bright orange for my good buddy Brennen Porte...
03/24/2017

Today at Enviroblast we media blasted and powder coated this Yeti cup in a bright orange for my good buddy Brennen Porter. Yes that's right Enviroblast has grown to powder coating so give us a call with all of your blasting and powder coating needs!

Here's a great looking 47 panel truck that got Enviroblasted the other day. It was incredible how solid this old deliver...
02/26/2017

Here's a great looking 47 panel truck that got Enviroblasted the other day. It was incredible how solid this old delivery truck was! She's got a new floor and is well on its way to being back on the road!

Two days and over twenty bags later I finally completed blasting this AAA trash truck. They're going to paint it green a...
02/12/2017

Two days and over twenty bags later I finally completed blasting this AAA trash truck. They're going to paint it green and use it for recycling. Thanks again for the job guys!

68 Shelby mustang GT350 convertible that came through the shop had all original paint. I did the inside outside and bott...
01/25/2017

68 Shelby mustang GT350 convertible that came through the shop had all original paint. I did the inside outside and bottom in one 8 hour day.

Nice 50 chevy pickup cab came out beautiful. Original paint and and some surface rust cleaned right up
12/12/2016

Nice 50 chevy pickup cab came out beautiful. Original paint and and some surface rust cleaned right up

Cleaned up this rear bumper for a keep for one of my buddies. A quick coat of paint after the blasting it turned out loo...
11/16/2016

Cleaned up this rear bumper for a keep for one of my buddies. A quick coat of paint after the blasting it turned out looking brand new!

A really cool old pedal car came in the other day. He tried to strip it with a DA and decided to just have it blasted an...
11/11/2016

A really cool old pedal car came in the other day. He tried to strip it with a DA and decided to just have it blasted and it turned out beautiful. What would have taken him days to sand down took me not even an hour.

Had a few small items come in. Two pieces are for a fire place and wee cast iron which cleans up amazingly, and the othe...
10/17/2016

Had a few small items come in. Two pieces are for a fire place and wee cast iron which cleans up amazingly, and the other is an ornate plant holder.

Address

23208 E US Highway 24, Ste 1
Independence, MO
64056-3976

Telephone

(816) 769-4001

Alerts

Be the first to know and let us send you an email when Enviroblasting llc posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Enviroblasting llc:

Videos

Nearby autos & automotive services


Other Automotives in Independence

Show All

Comments

Kevin did a great job of "cleaning up" my snow plow. I re-painted it, and it came out very nice.
How much to sandblast a standard snow plow?
Enviroblasting powder coated my front bumper gloss black! And I gotta say it turned out perfect! Most definitely be using this company for future powder coating needs! Thank you Kevin!
Hey Kevin how much to come to KCK to blast a clawfoot tub and feet? And how much if we brought it to you? Thanks! Ken Wilshire All America Fine Finishes (913) 850-3308 www.kcbathtub.com
I've left 4+ phone messages with no return calls and you have my property. Whats going on?