SketchyVette

10/12/2025

Black 2008 Corvette Z06
$100K OBO 👀👀👀
Black 2008 Corvette Z06
20,237 Miles
1300+ WHP
Gary Ochs built Dart LS Next Pro 427
Callie’s Magnum CCW 4.00 58x crank
Callie‘s ultra enforcer 6.125 rods
Diamond LS2K pistons -22 Calico Coated skirts
Brodix BR7 - Greg Good porting Beryllium Copper seats
Inconel exhaust valves
Titanium intake valves Beryllium Copper seats
Crower shaft mount rockers
Cam - LLSR .293/303 748/.748 lift 117 + 4
Push rods - Manton
Alternator - JS 250A
Fuel - Fore Triple 3x TI274, Fore regulator and rails
Injectors - ID 2600
Fuel Filter - ID F750
DMS custom A2W
DMS Custom Catch-can
Throttlebody - Nick Williams 102
Shaun’s Custom Alloy Intake
F1-X Procharger 3.85”
Dallas performance 10 Rib direct-drive
Innovators West Balancer 8.125” 10 Rib
Dewitt’s cutdown radiator
Dewitt’s Dual SPAL fans
Improved Racing Oil Cooler Kit EC6- 600 and custom spacer for Dart Block
Factory AC
Clutch - RPS Triple Carbon
Master/Slave - Tilton w/ remote bleed
Bellhousing - QuickTime
Transmission - Tick Performance Level 5 T56 Magnum w/ Tilton pump, bungs and sprayers
DSS carbon fiber prop-shaft w/ billet isolators
Diff - RPM Level 4 Wavetrac 3.42 09-2013 Z06 Diff Housing
Axels & Hubs - DSS Level 5
Pfadt Featherlight coilovers
Pfadt rear sway
Carlyle 15” conversion
Wheels - Weld S71 / Alumastar
Tires - MT 275/60R15 6” Frontrunner
Headers - ARH 2-1/8 Stepped 3.5” collector turned down
Engine management - Holly dominator piggybacked to factory PCM.
Stock (LPE) Dash, HUD, DIC, doors and AC work etc.
6.5” Holly dash
Coils - Holley Smart Coils
Wires - Accel
Shifter - MGW w/ Fueltech Strain-gauge
Seats - Corbeau EvoX
Steering Wheel - 13” MPI Drag Racing Concept
+1.5 Supervettes widebody rear quarters
ZR1 CF roof painted GM gloss black…
There is likely much, much more. This is just off the top of my head and I can say without a shame I do have brain damage so… I’m probably forgetting a thing or two! 😆

10/07/2025

Thank you
TB not hooked up cold start …
AC still blows cold! 🥶
It was on when I fired the car up…

$111,000 OBO 👀
Black 2008 Corvette Z06
20,237 Miles
1300+ WHP
Gary Ochs built Dart LS Next Pro 427
Callie’s Magnum CCW 4.00 58x crank
Callie‘s ultra enforcer 6.125 rods
Diamond LS2K pistons -22 Calico Coated skirts
Brodix BR7 - Greg Good porting Beryllium Copper seats
Inconel exhaust valves
Titanium intake valves Beryllium Copper seats
Crower shaft mount rockers
Cam - LLSR .293/303 748/.748 lift 117 + 4
Push rods - Manton
Alternator - JS 250A
Fuel - Fore Triple 3x TI274, Fore regulator and rails
Injectors - ID 2600
Fuel Filter - ID F750
DMS custom A2W
DMS Custom Catch-can
Throttlebody - Nick Williams 102
Shaun’s Custom Alloy Intake
F1-X Procharger 3.85”
Dallas performance 10 Rib direct-drive
Innovators West Balancer 8.125” 10 Rib
Dewitt’s cutdown radiator
Dewitt’s Dual SPAL fans
Improved Racing Oil Cooler Kit EC6- 600 and custom spacer for Dart Block
Factory AC
Clutch - RPS Triple Carbon
Master/Slave - Tilton w/ remote bleed
Bellhousing - QuickTime
Transmission - Tick Performance Level 5 T56 Magnum w/ Tilton pump, bungs and sprayers
DSS carbon fiber prop-shaft w/ billet isolators
Diff - RPM Level 4 Wavetrac 3.42 09-2013 Z06 Diff Housing
Axels & Hubs - DSS Level 5
Pfadt Featherlight coilovers
Pfadt rear sway
Carlyle 15” conversion
Wheels - Weld S71 / Alumastar
Tires - MT 275/60R15 6” Frontrunner
Headers - ARH 2-1/8 Stepped 3.5” collector turned down
Engine management - Holly dominator piggybacked to factory PCM.
Stock (LPE) Dash, HUD, DIC, doors and AC work etc.
6.5” Holly dash
Coils - Holley Smart Coils
Wires - Accel
Shifter - MGW w/ Fueltech Strain-gauge
Seats - Corbeau EvoX
Steering Wheel - 13” MPI Drag Racing Concept
+1.5 Supervettes widebody rear quarters
ZR1 CF roof painted GM gloss black…
There is likely much, much more. This is just off the top of my head and I can say without a shame I do have brain damage so… I’m probably forgetting a thing or two! 😆

10/05/2025

Factory dash, door locks, key FOB, A/C controls etc etc I have the stock steering wheel to swap back if you prefer.

Sketchy is for sale: $111,000
Black 2008 Corvette Z06
20,237 Miles
1300+ WHP
Gary Ochs built Dart LS Next Pro 427
Callie’s Magnum CCW 4.00 58x crank
Callie‘s ultra enforcer 6.125 rods
Diamond LS2K pistons -22 Calico Coated skirts
Brodix BR7 - Greg Good porting Beryllium Copper seats
Inconel exhaust valves
Titanium intake valves Beryllium Copper seats
Crower shaft mount rockers
Cam - LLSR .293/303 748/.748 lift 117 + 4
Push rods - Manton
Alternator - JS 250A
Fuel - Fore Triple 3x TI274, Fore regulator and rails
Injectors - ID 2600
Fuel Filter - ID F750
DMS custom A2W
DMS Custom Catch-can
Throttlebody - Nick Williams 102
Shaun’s Custom Alloy Intake
F1-X Procharger 3.85”
Dallas performance 10 Rib direct-drive
Innovators West Balancer 8.125” 10 Rib
Dewitt’s cutdown radiator
Dewitt’s Dual SPAL fans
Improved Racing Oil Cooler Kit EC6- 600 and custom spacer for Dart Block
Factory AC
Clutch - RPS Triple Carbon
Master/Slave - Tilton w/ remote bleed
Bellhousing - QuickTime
Transmission - Tick Performance Level 5 T56 Magnum w/ Tilton pump, bungs and sprayers
DSS carbon fiber prop-shaft w/ billet isolators
Diff - RPM Level 4 Wavetrac 3.42 09-2013 Z06 Diff Housing
Axels & Hubs - DSS Level 5
Pfadt Featherlight coilovers
Pfadt rear sway
Carlyle 15” conversion
Wheels - Weld S71 / Alumastar
Tires - MT 275/60R15 6” Frontrunner
Headers - ARH 2-1/8 Stepped 3.5” collector turned down
Engine management - Holly dominator piggybacked to factory PCM.
Stock (LPE) Dash, HUD, DIC, doors and AC work etc.
6.5” Holly dash
Coils - Holley Smart Coils
Wires - Accel
Shifter - MGW w/ Fueltech Strain-gauge
Seats - Corbeau EvoX
Steering Wheel - 13” MPI Drag Racing Concept
+1.5 Supervettes widebody rear quarters
ZR1 CF roof painted GM gloss black…
There is likely much, much more. This is just off the top of my head and I can say without a shame I do have brain damage so… I’m probably forgetting a thing or two! 😆

10/05/2025

Little shuffle around Sketch:
Sketchy is for sale: $111,000
Black 2008 Corvette Z06
20,237 Miles
1300+ WHP
Gary Ochs built Dart LS Next Pro 427
Callie’s Magnum CCW 4.00 58x crank
Callie‘s ultra enforcer 6.125 rods
Diamond LS2K pistons -22 Calico Coated skirts
Brodix BR7 - Greg Good porting Beryllium Copper seats
Inconel exhaust valves
Titanium intake valves Beryllium Copper seats
Crower shaft mount rockers
Cam - LLSR .293/303 748/.748 lift 117 + 4
Push rods - Manton
Alternator - JS 250A
Fuel - Fore Triple 3x TI274, Fore regulator and rails
Injectors - ID 2600
Fuel Filter - ID F750
DMS custom A2W
DMS Custom Catch-can
Throttlebody - Nick Williams 102
Shaun’s Custom Alloy Intake
F1-X Procharger 3.85”
Dallas performance 10 Rib direct-drive
Innovators West Balancer 8.125” 10 Rib
Dewitt’s cutdown radiator
Dewitt’s Dual SPAL fans
Improved Racing Oil Cooler Kit EC6- 600 and custom spacer for Dart Block
Factory AC
Clutch - RPS Triple Carbon
Master/Slave - Tilton w/ remote bleed
Bellhousing - QuickTime
Transmission - Tick Performance Level 5 T56 Magnum w/ Tilton pump, bungs and sprayers
DSS carbon fiber prop-shaft w/ billet isolators
Diff - RPM Level 4 Wavetrac 3.42 09-2013 Z06 Diff Housing
Axels & Hubs - DSS Level 5
Pfadt Featherlight coilovers
Pfadt rear sway
Carlyle 15” conversion
Wheels - Weld S71 / Alumastar
Tires - MT 275/60R15 6” Frontrunner
Headers - ARH 2-1/8 Stepped 3.5” collector turned down
Engine management - Holly dominator piggybacked to factory PCM.
Stock (LPE) Dash, HUD, DIC, doors and AC work etc.
6.5” Holly dash
Coils - Holley Smart Coils
Wires - Accel
Shifter - MGW w/ Fueltech Strain-gauge
Seats - Corbeau EvoX
Steering Wheel - 13” MPI Drag Racing Concept
+1.5 Supervettes widebody rear quarters
ZR1 CF roof painted GM gloss black…
There is likely much, much more. This is just off the top of my head and I can say without a shame I do have brain damage so… I’m probably forgetting a thing or two! 😆

10/05/2025

Sketchy is for sale: $111,000
Black 2008 Corvette Z06
20,237 Miles
1300+ WHP
Gary Ochs built Dart LS Next Pro 427
Callie’s Magnum CCW 4.00 58x crank
Callie‘s ultra enforcer 6.125 rods
Diamond LS2K pistons -22 Calico Coated skirts
Brodix BR7 - Greg Good porting Beryllium Copper seats
Inconel exhaust valves
Titanium intake valves Beryllium Copper seats
Crower shaft mount rockers
Cam - LLSR .293/303 748/.748 lift 117 + 4
Push rods - Manton
Alternator - JS 250A
Fuel - Fore Triple 3x TI274, Fore regulator and rails
Injectors - ID 2600
Fuel Filter - ID F750
DMS custom A2W
DMS Custom Catch-can
Throttlebody - Nick Williams 102
Shaun’s Custom Alloy Intake
F1-X Procharger 3.85”
Dallas performance 10 Rib direct-drive
Innovators West Balancer 8.125” 10 Rib
Dewitt’s cutdown radiator
Dewitt’s Dual SPAL fans
Improved Racing Oil Cooler Kit EC6- 600 and custom spacer for Dart Block
Factory AC
Clutch - RPS Triple Carbon
Master/Slave - Tilton w/ remote bleed
Bellhousing - QuickTime
Transmission - Tick Performance Level 5 T56 Magnum w/ Tilton pump, bungs and sprayers
DSS carbon fiber prop-shaft w/ billet isolators
Diff - RPM Level 4 Wavetrac 3.42 09-2013 Z06 Diff Housing
Axels & Hubs - DSS Level 5
Pfadt Featherlight coilovers
Pfadt rear sway
Carlyle 15” conversion
Wheels - Weld S71 / Alumastar
Tires - MT 275/60R15 6” Frontrunner
Headers - ARH 2-1/8 Stepped 3.5” collector turned down
Engine management - Holly dominator piggybacked to factory PCM.
Stock (LPE) Dash, HUD, DIC, doors and AC work etc.
6.5” Holly dash
Coils - Holley Smart Coils
Wires - Accel
Shifter - MGW w/ Fueltech Strain-gauge
Seats - Corbeau EvoX
Steering Wheel - 13” MPI Drag Racing Concept
+1.5 Supervettes widebody rear quarters
ZR1 CF roof painted GM gloss black…
There is likely much, much more. This is just off the top of my head and I can say without a shame I do have brain damage so… I’m probably forgetting a thing or two! 😆

07/07/2023

Dash Logic finally came in to get rid of the nagging "reduced engine power" flashing in the DIC.

*Normal DIC behavior for a Holley swap when keeping the stock cluster, locks, push to start etc

The Holley Pro Dash shows more than enough signals but suppose I can show a few in the DIC/HUD as well with is doodad but not it's main purpose.

07/01/2023

Still catches my eye, sometimes..
Had to snap a shot.

06/15/2023

That was fast!...

doesn't play around getting orders out! 🥇

Big thanks to for the note and getting this out quick. Hope to see you soon man and wish you and yours are the best!

Additional thanks to Jose helping us out making the purchase quick and painless.🥇

Dropped the injectors off they're getting these in and the tuned before the car comes home.🥇

We're close, real close. 🙏

05/10/2023

.innovations wheel in with a center in the car now

swapped out the handle for the strain gauge setup -> Dominator 🔥

Big thanks to for the help and info.

Side-note: I'm not really able to respond to all the DM's I see piled in my inbox; dealing with an MS flare-up which in part makes typing a miserable task. I'll be more active once I get through this.

07/09/2022

Forgot about these from the morning of C&C COTA a few weeks back.

#427

07/08/2022

07/05/2022

Dropped the ole gal off for things and stuff.