Stock ecu vs Haltech, same setup, just the ecu change! #haltechecu #cpmotorsports #carloscreative #cornlife #myhighreadingdyno #sr20
The 6466 that could… these turbos are one of the baddest for any street car setup. Nick Turner brought us his baby for the complete CP Motorsport sauce, with all the bells and whistles. Pushing our CP built engine and all the supporting mods with obviously the Haltech elite 2500 on board is making some impressive power for next months SUPERBOWL of racing!!!! Little teaser video
Let us know how we can help you with your car’s power goals
#CPM #CPMOTORSPORTS #cpsauce #lonestarsubieandevo #haltech #bulletproofracing #PrecisionTurbo #cpmotorsports #evo #evolution #saltywiring #krakenfab
SHARE SHARE
Another evo x, back to back X’s with dual fuel tune after some repairs, on the 🌽 it did 443 whp 411tq!
#lonestarevoandsubie #carloscreative #cpmotorsports
Evo X with a CP built motor on a 3076 turbo, dual fuel tune, this is what it did on E85 on a conservative tune.
#carloscreative #cpmotorsports #lonestarevoandsubie
Justwebie 2g awd
Customer from out of state came in to finish his launch tune today, pretty nice to build 25psi for launch on .8 seconds😎 on a presicion #6 converter.
King Haltech ecu on board, Precision Turbo & Engine 6466, Carbonetics Carbon Fiber body parts on 🔥
Cant wait to see this thing on a prepped surface and 20psi lesser of tire pressure😂
#CpMotorsports #CarlosCreativeTuned #PresicionTurbo #haltech #6466 #awd #hoosiers #4g63 #DSM #2G #dynojet #burnout #lonestarevoandsubie #turbo #Mitsubishi #1000hpclub
Today i was doing the opposite of every day, detuning this vehicle to make less power, success!
We got to keep some other things happy!
541 whp at 24 psi
#cpmotorsports #carloscreative #lonestarevoandsubie #cobbtuning #thebestatwhatwedo
This one came all the way from north of Dallas from IPS Performance Shop, the vehicle is built by them.
We are putting our sauce in the flex fuel tune, left conservative at 18 psi on 93 with 361 whp and on E70 at spiking to 28 but dropping to 24 it did 516 whp and 542 pnds of torque, enough to spining all 4 tires in 3rd gear!
#carloscreative #cpmotorsports #lonestarevoandsubie
#cobbtuning
Beautiful Acura Integra, engine built by us, fuel system, intercooler piping, hood exit and many other things built by us, now we are doing the break in tune before sending it out to have the customer do the 1000 miles.
Customer want around 450 whp, he’s super happy he picked us to build his ride!
#carloscreative #cpmotorsports #thebestatwhatwedo #pricesfromthisworld
#hondata
This one came in with a few issues, vvt actuators not working properly, exhaust leaks, horrible tune from another shop, we did the timing job and replaced both vvt gears, resolved the leaks, got it on the dyno and with our tune it did awesome for a car with minor mods, just ets turbo inlet and full divorced downpipe and full exhaust, stock injectores on 93 oct!
#carloscreative
#cpmotorsports
#lonestarevoandsubie
#evox #thebestatwhatwedo
#pricesfromthisworld
2002 WRX with STI turbo at 17 psi’s on 93 oct on a conservative tune!
317 whp!
Call us to setup your appointment!
#cpmotorsports #carloscreative #lonestarevoandsubie
#cobbtuning
And after the Break in Process, its tuned! 310 whp 365 tq
Simple bolt on mods and COBB 1050 injectors, next will be the E85 tune!
#cpmotorsports
#carloscreative
#lonestarevoandsubie
#cobbtuning
This is what $16k give you on an EVO X in our shop!
This is a stock long block!
#cpmotorsports #carloscreative
#lonestarevoandsubie
#precisionturbo
#tialife
#walbro
After a clutch installation and fixing crank codes, we tuned this 2016 WRX on a flex fuel setup, it has full exhaust, aem intake, 3 port boost controler, front mount Intercooler.
Leaving it at only 16 psi, on both 93 oct side and E85 side, it pulls great till 7K!
300 whp on 93 oct and 364 on E85!
#cobbtuning #cpmotorsports
#carloscreative #lonestarevoandsubie
2016 STI with DP, Intake and external waste gate, on 93.
#cpmotorsports #carloscreative
309 whp and 330 tq
After fabricating the top mount turbo header, downpipe , waste gate dump, radiator support etc, we put this Lude as the owner calls it and got 397 at 10 psi on 93 oct, in think we would have done more if it didn’t had a 2.5 inch exhaust after our 3 inch ss downpipe, but that’s what the customer wanted.
#hondata #carloscreative #cpmotorsports
I think it died! #precisionturbo to the rescue!
#cpmotorsports #carloscreative
It died with an honorable death after producing 454whp at 25 psi, not bad for a china turbo.
Not bad for an old school setup on a B series with a Hondata S300 and E85. 955 whp at 35 psi. I wish we had a good Presicion turbo in it.
Have fun tomorrow Lobo Oneatos!
#cpmotorsports #carloscreative
#hondata
It does not sound intimidating, who wants to try in Oklahoma?
#carloscreative #cpmotorsports
#apracing
Lauch control ready! #haltechecu
#cpmotorsports #carloscreative
#apracing We are in full use of the boost gauge!
Jr Dorado with a surprise visit and ended up convincing me to tune the car today, it was very fun, just had to change spark plugs but besides that it behaved like a champ!
As always #haltechecu on board!
#cpmotorsports
PT6466 Haltech 2500 Nick's Evo 9
Another big hp evo 4g63 engine build on a not so big hp turbo today 😁
Featuring a #presicionturbo 6466 #AMS bolt on intercooler,
#skunk2racing intake manifold, Aluminum rod #ariaspistons combo
#CPspec and our favorite ecu #haltech elite 2500 to control this bad boy and all Haltech sensors, all safety features on, plus #GapInsurance #RollingAntiLag
#Tial next year to drink some #VpRacingFuels Just imagine this beast on a bigger intercooler🤔
Shout out to @bpracinglv #BulletproofRacing for providing us with the baddest double pumper on the market💪🔥
Another happy customer but hey, there's still more to squeeze out of this one, 900hp sooner than you think🤟
#CpGang #CpSauce #CarlosCreativeTuned
#}