Rigged Right Marine Services

Rigged Right Marine Services Your one stop shop for custom rigging, dash panels, electronics installation, and any other marine service needs!

Boat show hasn’t even finished yet and we’re already covered up with custom acrylic orders!It’s that time of year when e...
02/01/2026

Boat show hasn’t even finished yet and we’re already covered up with custom acrylic orders!
It’s that time of year when everyone shifts from the deer stand to the rod-n-reel!

Custom Acrylic Panels and livewell lids for days…
09/27/2025

Custom Acrylic Panels and livewell lids for days…

A little bit of the work we’ve done lately. Been too busy to post. Maxx Tread
09/02/2025

A little bit of the work we’ve done lately. Been too busy to post. Maxx Tread

10/19/2024
Here's a stack of   Boats panels with custom logos and labels for PlashLights switches, as well as a   panel for a Monta...
08/10/2024

Here's a stack of Boats panels with custom logos and labels for PlashLights switches, as well as a panel for a Montauk 170.

Custom acrylic livewell lids with reverse engraving and Gemlux Fishing hardware.
08/09/2024

Custom acrylic livewell lids with reverse engraving and Gemlux Fishing hardware.

I don't think there is anyone on the Gulf Coast that does more  refits than Derek and his crew at Breakwater Marine Elec...
08/07/2024

I don't think there is anyone on the Gulf Coast that does more refits than Derek and his crew at Breakwater Marine Electronics
They had us make a gloss black acylic panel to flush mount two new Garmin MFDs. This really brought the boat's dash up to today's aesthetic standards! If you need electronics on a or any other boat, give Breakwater a shout!

Acrylic Switch Panels and switches going to  These are 1/4" Gloss black w/engraved labels and logos, ready for PlashLigh...
08/06/2024

Acrylic Switch Panels and switches going to
These are 1/4" Gloss black w/engraved labels and logos, ready for PlashLights 22mm switches and LED backlighting. George in pearland does more than just fiberglass!

A couple of glove boxes we made for . 'George in Pearland' does great work and keeps us busy with custom acrylic! Go see...
08/05/2024

A couple of glove boxes we made for . 'George in Pearland' does great work and keeps us busy with custom acrylic! Go see him for your fiberglass repair, restoration, and fabrication!

08/05/2024

After a busy summer taking care of everyone else's projects, we'll be taking a small break for ourselves this week just before school starts back up. If you reach out and don't receive an immediate response, please know that we'll reply as soon as possible! We'll be back at it the following Monday, 8/12
Thank you all for keeping us busy! We appreciate your support.

A few custom panels going onto a   refit down at Gulf Coast Fiberglass
08/04/2024

A few custom panels going onto a refit down at Gulf Coast Fiberglass

The most recent floor we knocked out under our Maxx Tread brand.We also do the switch panels on these boats.Stop by and ...
08/04/2024

The most recent floor we knocked out under our Maxx Tread brand.
We also do the switch panels on these boats.
Stop by and take a look at Skuta Armored Boats if you're in the market for a good all-around rig for the gulf coast!

Address

Houston, TX

Telephone

(832) 705-5946

Website

Alerts

Be the first to know and let us send you an email when Rigged Right Marine Services posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Rigged Right Marine Services:

Featured

Share

Category