HorsepowerFactory

04/30/2026

day for Black label 🔥

04/30/2026

David fabworksinc finished up putting together eleazar’s Twin turbo LS swapped 2023 silverado “Black Label” 🔥
Brought over to get dialed in by cesar on the rollers ‼️

Trucks build list :
⁃ 408 c.i.
⁃ stock 243 heads
⁃ TSP Custom grind cam⚙️
- TSP Titan intake manifold w/ tick performance air to water intercooler
⁃ Th400 w/ PTC stall
⁃ Powered by Holley dominator
⁃ 69/73 BorgWarner turbos 🐌 🐌
⁃ Aeromotive 10.0 fuel pump
⁃ Pump E85

🔥At the customer’s request ! dyno numbers will not be disclosed🔥

Call or DM us to get your build started‼️

📍7618 GREENSWARTH LN HOUSTON TX
📲281.902.9398
🌎www.horsepowerfactorytx.com

WORK HOURS:
🗓️MONDAY-FRIDAY
⏰10am-6pm

04/13/2026

🔥 TSP CAM KITS AVAILABLE 🔥

Would like to remind you all we do offer complete cam kits for LS platforms:
LS1 / LS2 / LS3 / LS7

Perfect for anyone looking to upgrade on performance, sound, and overall drivability ‼️

- Texas Speed camshaft
- Valve spring kit
- Pushrods
- Lifters & Trays

Everything you need in one kit to get your build done right the first time.

Whether you’re going for a clean daily chop or an aggressive setup, we got it in stock!

‼️Installation is available as well‼️

Call or DM us to get your build started‼️

📍7618 GREENSWARTH LN HOUSTON TX
📲281.902.9398
🌎www.horsepowerfactorytx.com

WORK HOURS:
🗓️MONDAY-FRIDAY
⏰10am-6pm

04/08/2026

Luis brought in his 2016 Escalade after the dealership claimed the engine was bad.

After tearing the motor down, we found the real issue was lifter failure ‼️

We went ahead and performed a DoD delete, installed a non-DoD cam, and added a fresh set of lifters, trays, and new gaskets. Cesar wrapped it up by calibrating the ECM, and the Escalade was back on the road🔥

Call or DM us to get your build started‼️

📍7618 GREENSWARTH LN HOUSTON TX
📲281.902.9398
🌎www.horsepowerfactorytx.com

WORK HOURS:
🗓️MONDAY-FRIDAY
⏰10am-6pm

04/01/2026

Isaias brought in his clean 2012 GMC Sierra 🧼 for a cam upgrade, going from stock to a TSP Chopacabra cam perfect for daily driving with a smooth, choppy sound🔥

We installed a fresh set of cam bearings, lifters, new oil pump, and all-new gaskets, then
Cesar finalized it with a street tune‼️

Call or DM us to get your build started‼️

📍7618 GREENSWARTH LN HOUSTON TX
📲281.902.9398
🌎www.horsepowerfactorytx.com

WORK HOURS:
🗓️MONDAY-FRIDAY
⏰10am-6pm

03/25/2026

Javi brought over his CLEAN 🧼 Pontiac G8 GT for some upgrades!

We went ahead and installed a TSP Stage 3 cam kit w/ DoD delete along with a 3200 billet Circle D converter on the 6L80 ‼️
Then Cesar got it dialed in on the street 🔥

Car build list :
⁃ 6.0 l76
⁃ Long tube headers 🔥
⁃ TSP stage 3 cam kit ⚙️
⁃ Circle D 3200 stall
⁃ 93 octane ⛽️

Call or DM us to get your build started‼️

📍7618 GREENSWARTH LN HOUSTON TX
📲281.902.9398
🌎www.horsepowerfactorytx.com

WORK HOURS:
🗓️MONDAY-FRIDAY
⏰10am-6pm

03/25/2026

Jose brought in his 2021 SS Camaro for us to install some upgrades and get it dialed in by Cesar🔥
We went ahead and installed a TSP stage 2 cam kit , DoD Delete , and a 3400 Pro series Circle D converter ‼️

Car build list :
⁃ 6.2 LT1
⁃ TSP stage 2 cam kit ⚙️
⁃ LT2 Intake manifold
⁃ Longtube Headers
⁃ ROTO - FAB cold air intake 💨
⁃ Pump E85 ⛽️

🔥Cesar got the car to lay down 510 rwhp🔥

Call or DM us to get your build started‼️

📍7618 GREENSWARTH LN HOUSTON TX
📲281.902.9398
🌎www.horsepowerfactorytx.com

WORK HOURS:
🗓️MONDAY-FRIDAY
⏰10am-6pm

03/24/2026

‼️ RESTOCKED ‼️

These rear brake conversion brackets are designed to fit the 99-18 GM trucks. The brackets allow you to run 15” wheels. These are CNC machined out of 1/2” 6061 Aluminum, made in the USA. 🇺🇸

$135 for the set.

Contact us if you are interested in dealer pricing.

Call or DM us to get your build started‼️

📍7618 GREENSWARTH LN HOUSTON TX
📲281.902.9398
🌎www.horsepowerfactorytx.com

03/23/2026

LT1 & 10L80 combo 🔥

03/20/2026

Israel ready for the TRUCKFEST EVENT over in dallas this weekend‼️

03/20/2026

Israel Vedoy from came down all the way from Florida to throw his CLEAN 05 RCSB on the dyno for Cesar to get it dialed in for the TRUCKFEST EVENT over in dallas this weekend‼️

Truck build list:
⁃ 408 stroker
⁃ FIS 98/113 turbo 🐌
⁃ Powered by HOLLEY terminator 💻
⁃ Holley Hi-ram w/ shearer fab lid
⁃ Bosch 210 injectors
⁃ Aeromotive 5.0 fuel pump
⁃ Pump E85 ⛽️
⁃ Built 4L80e w/ FTI converter ⚙️

🔥Cesar got the truck to lay down
1125 RWHP🔥

Call or DM us to get your build started‼️

📍7618 GREENSWARTH LN HOUSTON TX
📲281.902.9398
🌎www.horsepowerfactorytx.com

WORK HOURS:
🗓️MONDAY-FRIDAY
⏰10am-6pm