Green Mountain Customs

Green Mountain Customs Green Mountain Customs provides high quality production welding and fabrication services. From oil changes to engine swaps, bumpers to roll cages.

Green Mountain Customs specializes in automotive repairs, performance modifications and custom metal fabrication. We have the skill and tools to take your idea and make it reality.

Working with rigidized or dimpled material has its ups and downs. The dimples tend to hold the sheet metal corner joints...
01/21/2026

Working with rigidized or dimpled material has its ups and downs. The dimples tend to hold the sheet metal corner joints apart, and leave voids where the 1/4” plates are welded to the 16 gauge material. The end result turned out great.

Here’s a great example of the quality we strive for versus what another shop considered acceptable. 100 of each size buz...
10/20/2025

Here’s a great example of the quality we strive for versus what another shop considered acceptable. 100 of each size buzzed together and delivered to the customer

Some pictures of the 323GTX build for .mike. Not much was left untouched.
05/29/2023

Some pictures of the 323GTX build for .mike. Not much was left untouched.

01/09/2023

I’d like to apologize to anyone that’s recently sent a message. I’ve been unable to open messages sent to this page. For any inquiries please email [email protected]

Thanks!

Selling my Fummins. 2006 F-250 with a 2006 Cummins swap. Truck is from Georgia and absolutely rust free. eBay link in th...
09/08/2022

Selling my Fummins. 2006 F-250 with a 2006 Cummins swap. Truck is from Georgia and absolutely rust free. eBay link in the bio

A couple pictures from a rear radiator, fuel cell and firewall build completed earlier this summer on an S13.
09/03/2021

A couple pictures from a rear radiator, fuel cell and firewall build completed earlier this summer on an S13.

05/26/2021

Is this right?? 🤔🤔

Legacy GT twin scroll rotated up pipe with twin MVS wastegates. It was a challenge to get it all to fit especially sinc...
01/21/2021

Legacy GT twin scroll rotated up pipe with twin MVS wastegates. It was a challenge to get it all to fit especially since we were trying to avoid making a new downpipe. The lower fl**ge is also unique to the EL header on the car and was CNC cut in house. supplied the rest of the material.

Built a headache rack and rear light/filler panel for this flatbed truck. Also did some performance and preventative wor...
11/21/2020

Built a headache rack and rear light/filler panel for this flatbed truck. Also did some performance and preventative work to the engine. Swipe to see the before picture...

Some pictures of my personal quarantine project from this spring. Ended up getting an offer on it a couple days after ge...
10/13/2020

Some pictures of my personal quarantine project from this spring. Ended up getting an offer on it a couple days after getting it driving and sold it.

Pretty excited about this new to me Torchmate X CNC plasma table. I bought from a shop in PA that unfortunately went out...
09/22/2020

Pretty excited about this new to me Torchmate X CNC plasma table. I bought from a shop in PA that unfortunately went out of business. It took some work to get it setup in my shop, including pouring a new slab for it to sit on. But I can’t want to see what this thing can make.

Another cage from earlier this year in an FC RX7 for . Definitely not the easiest chassis I’ve caged especially when try...
07/23/2020

Another cage from earlier this year in an FC RX7 for . Definitely not the easiest chassis I’ve caged especially when trying to maximize head room.

Address

10390 RT116
Hinesburg, VT
05461

Website

Alerts

Be the first to know and let us send you an email when Green Mountain Customs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Green Mountain Customs:

Shortcuts

Share

Category