cyleskustoms

cyleskustoms custom vehicle work and repair

✅️, finished my lower shock mounts. They don't look like much but they will definitely do the job. #1978 #460 ...
08/11/2022

✅️, finished my lower shock mounts. They don't look like much but they will definitely do the job.

#1978 #460 #5.13gears

This is where we're at with the shock mounts. #1978 #460 #5.13gears ...
04/30/2022

This is where we're at with the shock mounts.
#1978 #460 #5.13gears

Thank you for the shock tabs. Stay tuned for the front shock mounts I'm fabing up tonight. #1978 #460 ...
04/23/2022

Thank you for the shock tabs. Stay tuned for the front shock mounts I'm fabing up tonight.
#1978 #460 #5.13gears

03/07/2022

The 78 is getting some well needed attention. Rear suspension is mocked-up cycled and ready to do some welding.
#1978 #460 #5.13gears

02/22/2022

Pulling the motor and Trans on the 65 Mustang today. Sending it to the engine shop to have the engine rebuilt. #347

Nothing to see here folks, just changing the oil in the mini bike on a 11,000 hoist .
09/04/2021

Nothing to see here folks, just changing the oil in the mini bike on a 11,000 hoist .

People wonder why they have so many problems. Here is just some of the Romex I pulled out of the trail rig while I'm wai...
06/27/2021

People wonder why they have so many problems. Here is just some of the Romex I pulled out of the trail rig while I'm waiting for suspension bushings.
#1978 #460 #5.13gears

1967 Cadillac Sedan Deville folks. I'm at shop and seen this caddy just sitting like this because he's short on time to...
03/13/2021

1967 Cadillac Sedan Deville folks. I'm at shop and seen this caddy just sitting like this because he's short on time to get it together. What do you say, should I help him out and get it together???
She's on bags with a 500" big block.
#1967

I asked a friend to do a rendering for a business logo, what do you think? I think he does some amazing work, you shoul...
02/21/2021

I asked a friend to do a rendering for a business logo, what do you think? I think he does some amazing work, you should go check him out! Thanks Mike!

Back in the garage at Cyles Kustoms working on the trail rig where I've decided to tear the suspension out to add roughl...
01/23/2021

Back in the garage at Cyles Kustoms working on the trail rig where I've decided to tear the suspension out to add roughly 5" of lift with progressive springs, Fox shocks on all four corners, and 5.13 gears.
#1978 #460

Just me being me. Thinking about shock valving tonight. Going to take a visit to for some ideas. this trail truck is ...
01/14/2021

Just me being me. Thinking about shock valving tonight. Going to take a visit to for some ideas. this trail truck is going to be pretty wild.

Address

Garden City, MI
48135

Website

Alerts

Be the first to know and let us send you an email when cyleskustoms posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to cyleskustoms:

Shortcuts

Share

Category