Mean Machine Cycles

Call Website Contact the business

Mean Machine Cycles Iowa's biggest little Harley shop! Maintnence, repairs, audio, dyno tuning and full custom builds

Mean Machine Cycles provides motorcycle general maintenance, customization, motor builds, dyno tuning, audio installation and more!


* Voted as Des Moines People’s Choice “Best Motorcycle Dealer” 2023 and 2024.

* Voted as Des Moines People’s Choice “Best Motorcycle Repair Shop” 2023 and 2024.

* Voted as Des Moines People’s Choice “Best Power Sports shop” 2023 and 2024.

* Voted as City Views “Best Motorcycle Repair Shop” 2022 and 2023

Colder weather is upon us! Need a safe, climate controlled environment to store your bike this winter? Look no further...
10/16/2026

Colder weather is upon us! Need a safe, climate controlled environment to store your bike this winter? Look no further!
Storage, oil change and full inspection all included for only $500 from the time you drop off til April 1st.
Give us a call today to reserve your spot and let us take care of your baby over the winter. 515-367-7336

TWIN CAM PERFORMANCE UPGRADE COMPLETE!This one got a bit more than just a cam swap. We took this Twin Cam from a 103” to...
10/15/2026

TWIN CAM PERFORMANCE UPGRADE COMPLETE!

This one got a bit more than just a cam swap. We took this Twin Cam from a 103” to a 107”. the cylinders were bored out and pistons replaced with a set of CP-Carrillo domed pistons to increase the compression. After adding the Woods 555 cams and a Powervision dynotune, this bike now makes 104 horsepower and 124 ft-lbs of torque! Pretty good numbers for a twin cam!!!

Looking to wake up your Harley and get some serious performance out of that V-Twin? We’ve got you covered!

Mean Machine Cycles is your go-to shop for Harley maintenance, performance & audio upgrades! Give us a call and let's get your bike making some power!
515-367-73336

That looks a little dramatic, doesn’t it?! 😂Your speed sensor is highly magnetic, which means it will attract metal shav...
10/13/2026

That looks a little dramatic, doesn’t it?! 😂

Your speed sensor is highly magnetic, which means it will attract metal shavings and debris over time. And when enough buildup collects on the sensor, it can cause some frustrating issues.

If you’re experiencing any of these problems, pull the speed sensor and give it a good cleaning. You might be surprised by how much debris is stuck to it — and cleaning it may be all it takes to solve the problem!

🚨 Symptoms to watch for:
• Speedometer drops to zero while riding or fluctuates wildly
• Turn signals fail to auto-cancel
• Bike stalls or idles roughly when coming to a stop
• Cruise control cuts out or refuses to engage

Before you start throwing parts at the problem, check the simple stuff first!

We’ve been keeping the shop busy with several cam installs lately, and this M8 114 is getting a Wood Performance WM8-22X...
10/08/2026

We’ve been keeping the shop busy with several cam installs lately, and this M8 114 is getting a Wood Performance WM8-22XE cam!

The 22XE has proven to be an excellent choice for the M8 114, delivering the kind of power these bikes love — big torque down low and strong power through the midrange.
That means hard-hitting acceleration, great street manners, and power right where you want it!

Looking to wake up your M8? For under $3k, you can add 30% more power to your motor. There is no other performance upgrade that will give you more bang for the buck. Give us a call at 515-367-7336

Wheel bearings have left the building!!!Every time we change your tires, our team checks your wheel bearings for that "g...
10/05/2026

Wheel bearings have left the building!!!

Every time we change your tires, our team checks your wheel bearings for that "gritty" rotation and side-to-side play. But here is the scary truth: hand-checking isn’t always a catch-all.
Wheel bearings can fail without warning and should be replaced every 20,000 miles. Waiting until they start making noise or locking up is a massive gamble. A complete wheel bearing failure doesn't just destroy other expensive components like your hub, axle, or brakes—it can easily result in a catastrophic wreck.

Don't push your luck on two wheels (or four). If you can't remember the last time your bearings were replaced, it's time to get them looked at.

Sportsters need love too!We are bumping up the horsepower in this Sportster 1200 with a killer upgrade package:Andrews N...
10/02/2026

Sportsters need love too!

We are bumping up the horsepower in this Sportster 1200 with a killer upgrade package:
Andrews N2 cams for that horsepower and torque
Vance & Hines Mini Grenades exhaust for the ultimate bark
Arlen Ness high-flow air cleaner to let it breathe

After its dialed in with a Powervision dynotune, this little bike is going to absolute RIP!!!

Tail lights quit working. Looks like some wires were cut, and judging by the amount of burnt rubber caked on the harness...
09/29/2026

Tail lights quit working. Looks like some wires were cut, and judging by the amount of burnt rubber caked on the harness and underside of the fender, we know how it happened too! 🤪

#

“THE BIKE FEELS A LITTLE SQUIRLY…” And now we know EXACTLY why! 😳Our customer brought the bike in because it just didn’t...
09/24/2026

“THE BIKE FEELS A LITTLE SQUIRLY…”
And now we know EXACTLY why! 😳

Our customer brought the bike in because it just didn’t feel right—and once we pulled the rear wheel, we found the problem.
THE WHEEL BEARINGS LITERALLY FELL APART DURING REMOVAL!

A strange feeling today could be a major problem tomorrow. Dont ignore it!
Bring it to Mean Machine Cycles and let us find it before it finds you!

09/22/2026

WELL… THAT’S A NEW ONE!

We’ve seen—and repaired—our fair share of electrical issues, but this one was definitely a first! BROKEN WIRES were actually affecting the throttle response.

Shes repaired and functioning properly again.

THE ONE WORD EVERY BIKER HATES TO HEAR… WINTER.🥶 As the temperatures start dropping, it’s time to start thinking about w...
09/21/2026

THE ONE WORD EVERY BIKER HATES TO HEAR… WINTER.🥶

As the temperatures start dropping, it’s time to start thinking about where your bike is going to spend the off-season.

For just $500, let Mean Machine Cycles take care of it!

🔒 CLIMATE-CONTROLLED STORAGE (From drop-off through April 1st)
🔧 FULL COMPREHENSIVE INSPECTION
🛢️ 3-HOLE OIL CHANGE
⚡ SPARK PLUGS REPLACED AS NEEDED
🌬️ AIR FILTER CLEANING

Come spring, your bike will be serviced, inspected, and ready to ride!

Free up space in your garage and have peace of mind knowing your bike is being taken care of by people who know Harleys.

Spots won’t last forever, so get your bike on the schedule now! 515-367-7336

Address

Elkhart, IA

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm

Telephone

+15153677336

Website

Alerts

Be the first to know and let us send you an email when Mean Machine Cycles posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Mean Machine Cycles:

Shortcuts

Share

Category