Jimmy's Rod n Customs

Jimmy's Rod n Customs Specializing in suspension and metal fabrication.

Operating as usual

I guess @mayrickey deserves a little attention with his new build. We are slowly getting all the problem areas worked ou...
10/22/2021

I guess @mayrickey deserves a little attention with his new build. We are slowly getting all the problem areas worked out on these newer chevy trucks to our liking. As you can see we was able to squeeze that brake assembly back on the firewall and we built a new bolt in brake assembly to keep everything working like factory. We were even able to pull the wheel in to keep some wheel to fender clearance for them customers who like to turn some while the wheel is tucking. #jimmysrodncustoms #chevytrucks #fullplatechassis #kmcwheels #customeverything #layinbody

10/05/2021

Pretty good day around here today. After a long road we finally got the Divco fired up. Still have some tuning to be done, but it sounds awesome! #jimmysrodncustoms #divco #bdsblower #marchpulleys #airride #fordbigblock #viair #accuair #photocredztoretz

Let’s try this again. Looking to add a few people on here as we are WAY  to busy for just myself and 1 seasonal employee...
09/10/2021

Let’s try this again. Looking to add a few people on here as we are WAY to busy for just myself and 1 seasonal employee. Pay will be based on what kind of skills you bring to the table. I’d say im looking for that unicorn employee, but willing to teach some for the right person that’s driven, has basic knowledge of what we do around here. If you have what it takes send your resume and info to [email protected] #jimmysrodncustoms #hiring #buildingawesomestuff #welding #airride #customchassis #suspension

Let’s try this again. Looking to add a few people on here as we are WAY to busy for just myself and 1 seasonal employee. Pay will be based on what kind of skills you bring to the table. I’d say im looking for that unicorn employee, but willing to teach some for the right person that’s driven, has basic knowledge of what we do around here. If you have what it takes send your resume and info to [email protected] #jimmysrodncustoms #hiring #buildingawesomestuff #welding #airride #customchassis #suspension

Today’s pick up day for the dually. Finished up a nut and bolt check this morning, installed our badge in the bed, and n...
06/07/2021

Today’s pick up day for the dually. Finished up a nut and bolt check this morning, installed our badge in the bed, and no out making sure all the hand controls are functioning correctly before he makes his drive back. #jimmysrodncustoms #ramdually #airlift #littleshopmfg #airride #custom #linex #viair #suicidedoors

We been cutting, stacking, and cleaning parts for a week now. Guess it’s time to start making the pieces look like somet...
04/10/2021

We been cutting, stacking, and cleaning parts for a week now. Guess it’s time to start making the pieces look like something. #jimmysrodncustoms #plateframe #custom #chevytrucks #escalade #bigthingscoming #9milesofweldingandgrinding

We been cutting, stacking, and cleaning parts for a week now. Guess it’s time to start making the pieces look like somet...
04/10/2021

We been cutting, stacking, and cleaning parts for a week now. Guess it’s time to start making the pieces look like something. #jimmysrodncustoms #plateframe #custom #chevytrucks #escalade #bigthingscoming #9milesofweldingandgrinding

Almost time for the dually to go home. We couldn’t resist getting some pics. #jimmysrodncustoms #ram #dually #airliftper...
12/22/2020

Almost time for the dually to go home. We couldn’t resist getting some pics. #jimmysrodncustoms #ram #dually #airliftperformance #viair #littleshopmfgwheels

Monday morning views. Nice overhead view of what’s in the shop, and we added some more bling to the Divco chassis for th...
11/30/2020

Monday morning views. Nice overhead view of what’s in the shop, and we added some more bling to the Divco chassis for the open house Saturday night. Thank you to everyone who helped out Saturday night and to everyone who showed up. It was a great evening. #jimmysrodncustoms #ram #divco #cleanshop #custom #airride #polishedstainlessexhaust #blower

Divco update. We recieved all our chrome back from Advanced Plating and as always they never let you down on quality. Th...
10/06/2020

Divco update. We recieved all our chrome back from Advanced Plating and as always they never let you down on quality. They did a awesome job on chroming the handmade bumpers we built for the Divco. #jimmysrodncustoms #advanceplating #onlythebest #handmade #divco #custom #sheetmetal #notstorebought

Just about finished up with this 3500 ram.
06/23/2020

Just about finished up with this 3500 ram.

Ram 3500 update. Front suspension is dialed in and almost ready to be sent out for powdercoat. Also getting the bed read...
05/15/2020

Ram 3500 update. Front suspension is dialed in and almost ready to be sent out for powdercoat. Also getting the bed ready for some sheetmetal work.

Getting our notches built and ready to install on a 2019 ram. #jimmysrodncustoms #custom #ramtrucks #notofftheshelf #air...
10/29/2019

Getting our notches built and ready to install on a 2019 ram. #jimmysrodncustoms #custom #ramtrucks #notofftheshelf #airride

We are late to post, but as most have seen already we got the little ranger finished up for slamfest last weekend. #jimm...
10/16/2019

We are late to post, but as most have seen already we got the little ranger finished up for slamfest last weekend. #jimmysrodncustoms #ranger #accuair #bodydrop #powdercoat #stainlessplumbing #stainlessexhaust #billetspecialties #racelinewheels

I’m so glad I can finally share these photos. It’s been tough keeping these offline since I started receiving them. I ca...
10/08/2019

I’m so glad I can finally share these photos. It’s been tough keeping these offline since I started receiving them. I can honestly say I have never been more happy to sell something personal, than I am now. @lo_ti10 has exceeded my expectations of completing this truck. #jimmysrodncustoms #fullplatechassis #viair #accuiar #dieselwheels #titandually #oneoffeverything #custom #kalconcepts #istillhavethesparekeys

Extremely nice 67 we are doing some suspension and steering repairs on. #jimmysrodncustoms #lincolncontinental  #67 #cho...
10/02/2019

Extremely nice 67 we are doing some suspension and steering repairs on. #jimmysrodncustoms #lincolncontinental #67 #choptop #accuair #custom #lincolnland

Mid week reminder that the pre order for these shirts ends this weekend as they go to print Monday morning. If you want ...
09/18/2019

Mid week reminder that the pre order for these shirts ends this weekend as they go to print Monday morning. If you want one of these with the three amigos on it, make sure to get your order in. They will be available in black and dark grey. Sizes small-XL are $20 and 2X- 5X as well as all tall shirts are $22 and $6 for shipping if your unable to pick them up from the shop or we can deliver to the slamfest show. Please PayPal [email protected] with your shirt size, color and shipping info. #jimmysrodncustoms #titan #3amigos #preorderendsmondaymorning #airride #bodydropped

New shirts for sale. We are offering these in grey and black. We will have them for pickup @slamfest or we can ship them...
09/13/2019

New shirts for sale. We are offering these in grey and black. We will have them for pickup @slamfest or we can ship them to you if you can’t make the show. The shirts are $20 up to XL and $22 for 2XL-5x and all talls. plus $6 for shipping. Shipping only to the lower 48. Please PayPal [email protected] with your shirt size, color, and address if you need shipping.

The downside to being so close to the ocean and east coast, had me preparing all day for this darn hurricane. Let’s hope...
09/02/2019

The downside to being so close to the ocean and east coast, had me preparing all day for this darn hurricane. Let’s hope it turns north and stays off anymore land. #jimmysrodncustoms #hurricanessuck #doriangoawaywegotworktodo #everyonestaysafe

Starting to see the light at the end of all the fabrication and mock up of the ole Divco. #jimmysrodncustoms #divco #mil...
08/22/2019

Starting to see the light at the end of all the fabrication and mock up of the ole Divco. #jimmysrodncustoms #divco #milktruck #custom #airride #blower #bigblockford #vibrant #blowerdriveservice

Thanks to @c12productions for capturing the real first photo of all three titans together at one place.  #jimmysrodncust...
08/04/2019

Thanks to @c12productions for capturing the real first photo of all three titans together at one place. #jimmysrodncustoms #c12productions #titan #nissan #fullplatechassis #introwheels #viair #accuair

I don’t normally do personal stuff on my business page, but I feel it’s fitting today. As most probably already know by ...
07/11/2019

I don’t normally do personal stuff on my business page, but I feel it’s fitting today. As most probably already know by now we lost Jennifer Lacy yesterday ( owner/builder of chix ride) after 17 years of fighting health issues. She was a fighter and fierce competitor. She loved the scene and that truck more than anything, except maybe our dog. Lol. #jimmysrodncustoms #chixride #gonebutneverforgotten #iwillmissher

Ranger progress pics. #jimmysrodncustoms #ranger #stainless #sheetmetal #airride #hardlines #bodydrop
06/28/2019

Ranger progress pics. #jimmysrodncustoms #ranger #stainless #sheetmetal #airride #hardlines #bodydrop

This week we celebrate 10 years of being open for business. Thank you to all of our past and current customers, without ...
04/04/2019

This week we celebrate 10 years of being open for business. Thank you to all of our past and current customers, without you all we could not have reached this milestone. Can’t wait to see what we have accomplished by 20 years. #jimmysrodncustoms #dailydriver #itsdirty #nevergetslayedout #10years #thankyou #airride #chassisfabrication

It’s a pretty awesome feeling getting to see mikes dually all finished up under the lights in Detroit. We spent 8 years ...
03/02/2019

It’s a pretty awesome feeling getting to see mikes dually all finished up under the lights in Detroit. We spent 8 years working on this truck from doing the chassis, to metal fab and couldn’t be any happier to see it completed. Congratulations @ncmikebarcia #jimmysrodncustoms #chassis #customeverything #airride #bodydrop #dually #chevy

Just finished up some work, we got the chance to do on this past cover car from Street Rodder 2004. #jimmysrodncustoms  ...
01/28/2019

Just finished up some work, we got the chance to do on this past cover car from Street Rodder 2004. #jimmysrodncustoms #streetrodder #streetrod #coolcar #budnik

Just finished up bagging this Lexus. #jimmysrodncustoms #lexus #accuair #vossen
01/15/2019

Just finished up bagging this Lexus. #jimmysrodncustoms #lexus #accuair #vossen

F.B.F. It was 19 years ago I tore down  my first mini truck for the 4th time and went all in, turning it into the March ...
12/28/2018

F.B.F. It was 19 years ago I tore down my first mini truck for the 4th time and went all in, turning it into the March 2003 street trucks cover truck. We modified and detailed everything imaginable for our skills at the time. I sure do miss this truck, so if you are the lucky one who owns it, I sure hope you are taking care of it since I haven’t seen it but once, since selling in 2004. #jimmysrodncustoms #powdercoat #chrome #hydraulics #nissan #hardbodyfrontier #covertruck #dailydriven #suicidedoors

Building some bumpers from scratch for the Divco. Still have some work to do, but really liking how they are turning out...
12/14/2018

Building some bumpers from scratch for the Divco. Still have some work to do, but really liking how they are turning out. #jimmysrodncustoms #divco #milktruck #custom #sheetmetal #beadroll #mittlerbros

Just did a E level install and 5,000 mile check up on the white one. #jimmysrodncustoms  #accuair #introwheels #titan #n...
11/30/2018

Just did a E level install and 5,000 mile check up on the white one. #jimmysrodncustoms #accuair #introwheels #titan #nissan #fullplatechassis #powdercoat #oneisadailydriver #takingcareofourcustomersafterthejobisdone

Getting started on building a little ranger chassis. #jimmysrodncustoms #minitruckin #ranger #custom #airride
11/29/2018

Getting started on building a little ranger chassis. #jimmysrodncustoms #minitruckin #ranger #custom #airride

Just a couple fords hanging around. Explorer is almost finished and ranger frame is on the table getting welded up now. ...
11/21/2018

Just a couple fords hanging around. Explorer is almost finished and ranger frame is on the table getting welded up now. #jimmysrodncustoms #ford #ranger #explorer #fullchassis #airride #billet

Starting to work the bugs out of this anglia, now that our custom rack and pinion came in from @unisteer_performance #ji...
11/17/2018

Starting to work the bugs out of this anglia, now that our custom rack and pinion came in from @unisteer_performance #jimmysrodncustoms #anglia #notjustatruckshop #custom

Closed the wheel opening up 4” and extending the front edge done 3.5” to give the Divco a much cleaner look. #jimmysrodn...
11/07/2018

Closed the wheel opening up 4” and extending the front edge done 3.5” to give the Divco a much cleaner look. #jimmysrodncustoms #sheetmetal #custom #divco #americanracing #wilwood

Address

405 Timaquan Trl Ste 1
Edgewater, FL
32132

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm
Saturday 9am - 6pm

Telephone

(386) 402-4975

Alerts

Be the first to know and let us send you an email when Jimmy's Rod n Customs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Jimmy's Rod n Customs:

Videos

Nearby autos & automotive services


Other Automotive Customizing in Edgewater

Show All

Comments

Looks like hot wheels could see the future!
Saw the blue titan on thanksgiving rolling home through Florida. Lucky enough to own one of your chassis now and it’s by far the best driving bagged truck I have ever owned. Keep up the killer work
Hello, this is Chad Vander Velden, owner/operator of Patriot 1 Transport LLC located in Port Orange, Fl. We are a veteran owned and operated company that hauls one load at a time in order to take the absolute best care of your vehicle, all while arriving in the shortest time possible! All cargo is fully insured. Please let me know if my services are needed. DOT 3161310 MC 111399 Ph: 305-338-3929 Email [email protected]
Finally got to see it in person. Much respect to yall
Its time... Will talk more with you about getting it to you...
I think I need you to build one of these!!