Cowtail Outlaw Offroad Customs

Cowtail Outlaw Offroad Customs Your local lowcountry source for turning your ATV/UTV build ideas into a reality!

We know ya’ll are putting those SxS and ATVs through it during this hunting season! Remember to give us a shout to get y...
09/20/2024

We know ya’ll are putting those SxS and ATVs through it during this hunting season! Remember to give us a shout to get you fixed up! Here’s a few we’ve done lately. Huge thanks to all our customers for trusting us! 🤟🏼

2016 Honda Pioneer 1000-5 in for all new Demon Powersports wheel bearings

2021 Polaris Ranger 1000XP in for full overhaul. Oil, Trans, & Diff service. New diff plug. New Hunterworks belt. Demon Powersports HD CV axle.

And 2 more Polaris Ranger 1000s in for full service overhaul, new belts, and more!

It’s hot out here but we still getting it done! 🔥 We are filling up the shops with machines and we love it so keep em co...
07/18/2024

It’s hot out here but we still getting it done! 🔥 We are filling up the shops with machines and we love it so keep em coming!

Returning customer brought his Can Am Outlander 1k back in for some maintenance!

- All new front & rear diff seal replacement
- New set of brake pads
- Winch cable replacement with synthetic rope
- New Demon Powersports HD axles all the way around.
- Threw on some new 30” Outlaw 2 tires
- Topped off with some new color matched Lucky 7 Motorsports floorboards and front and rear rack

This thing is coming together nicely 🤟🏼

Just wanted to let y’all know the CTO Crew is still busy at it! We appreciate everyone that’s given us the opportunity t...
05/30/2024

Just wanted to let y’all know the CTO Crew is still busy at it! We appreciate everyone that’s given us the opportunity to work on their rigs recently! Make sure y’all continue to like, share & follow the page! Shoot us a message or call if you’re looking to get some work done! Guaranteed best prices & turnaround time!🤟🏼

PS : For those that have asked, we now have some merch in the works. Stay tuned!

-2024 Polaris Ranger 1000XP Northstar in for a full service and belt replacement

-2012 Can Am Commander 1000 in for a full service with new tie rod boots, cvt boot, fuel pump, fuel injectors, spark plugs, air filter, gas tank cleanse, clutches clean and checked

-2016 Polaris Ranger 570XP in for a full service along with wheel bearings and cv axle replacement

This one isn’t quite done yet but we couldn’t wait to start showing off this monster! Shoot us a msg if you need help br...
05/01/2024

This one isn’t quite done yet but we couldn’t wait to start showing off this monster! Shoot us a msg if you need help bringing your build ideas to life! No matter how big or small.

2021 Can Am Renegade 1000 XMR

- STM Primary and Secondary clutches from ASA Powersports
- Dynojet PV3 Stage 3 Tune (+7 WHP) from ASA Powersports
- Dual RJWC Powersports Exhaust
- Eagle Eye Tail Lights from Wishbone Customs
- Custom Clear CVT Cover from AMcustomize
- 18” Fuel Mavericks on 32” Motohavoks
- Lucky 7 Floorboards also from ASA Powersports to clear those 32s
- Lucky 7 Rear Rack
- Air box seal from Outsiders MoCo
- 1.5” wheel spacers from Rough Country
- RGB Halo LED Headlights and lightbar
- Swapped out winch wire for synthetic rope

This weekend, part of the CTO crew will be headed down to River Neck Acres ATV Park and Campground for their brand new r...
04/22/2024

This weekend, part of the CTO crew will be headed down to River Neck Acres ATV Park and Campground for their brand new rave event! Y’all come out and join us for a good time even if it’s for just for the day. We will be in 2 out of the 4 main cabins so we will be easy to find!

Quick house call over the weekend for a 2022 Honda Rancher 420 SRA in need of full rear axle rebuild. Got all new bearin...
04/17/2024

Quick house call over the weekend for a 2022 Honda Rancher 420 SRA in need of full rear axle rebuild. Got all new bearings, seals, hubs, brake drum pads w/ springs and adjustment, and cleaned up axle housing tubes! Ready to be sent again 🤟🏼

2022 Can Am Outlander 1000R XT in this week for a OEM Snorkel Kit install with ECM relocate for a clean slick look! Big ...
04/12/2024

2022 Can Am Outlander 1000R XT in this week for a OEM Snorkel Kit install with ECM relocate for a clean slick look! Big things coming for this one later down the road! 🤫

Throwback to an OG build that started it all years ago. We do it all so shoot us a msg if your looking to get some work ...
03/28/2024

Throwback to an OG build that started it all years ago. We do it all so shoot us a msg if your looking to get some work done!

2012 Polaris Rzr 900XP

- 5” High Lifter Products lift kit install

- Wrapped in a set of 18” MSA wheels and 33” BKTs from KJ Motorsports

- Full Kenwood Audio roof system

- Full billet front differential from Super ATV (stock diff didn’t like those large tires/wheels)

- Custom wrap from 393 Components

- Topped of with new wheel bearings, ball joints, tie rods, and Gates belt

Y’all check out the before and after of my personal build I recently finished up! And let all your friends know to conta...
03/25/2024

Y’all check out the before and after of my personal build I recently finished up! And let all your friends know to contact the CTO crew for any ATV/UTV needs!

2021 Honda Pioneer 1000-5 Deluxe

- 4” Super ATV Single Idler Portals - 15% reduction

- 3” Texas Tough Customs lift with Stage 2 Heim Style HD Tie Rods that are powder coated Rainbows End color from S*M Coatings

- TC Snorkels 3” Stainless Steel Tig welded w/ spectre air filter powder coated black

- RB3 Offroad 14MM Billet Steering Rack

- Dynojet PV3 Tuner w/ Stage 2 tune from Florida Cracker Performance LLC

- HMF Racing Exhaust

- 18” Fuel Mavericks on 32” Motohavoks

- SSV Works Audio roof system w/ LED light

- Apex Badlands 5,500lb winch w/ remote

- Rough Country bumper w/ mini LED light bars

- Super ATV Frame Stiffener

- True Dual battery kit w/ brand new battery

- K&N Filters air filter

2019 Can Am Defender HD10 XMR in for some maintenance!- The plastic valve covers are prone to cracks/leaks so we did an ...
03/21/2024

2019 Can Am Defender HD10 XMR in for some maintenance!

- The plastic valve covers are prone to cracks/leaks so we did an aluminum valve cover conversion with new seals from Quad Logic - ATV / UTV Parts

- Front cv axle was on its way out so we swapped it over to a Rhino 2.0 from Super ATV

- A quick winch switch fix, shock adjustment, and brake pad replacement

- Then a overview to make sure air filter, belt, belt box, and clutches were in good shape

First official build is in the books! 2023 Honda Pioneer 1000-6 in for a full makeover! Check out the before and after!-...
03/20/2024

First official build is in the books! 2023 Honda Pioneer 1000-6 in for a full makeover! Check out the before and after!

- 3" Texas Tough Customs lift install includes 3" lift, 3.5" forward rake a-arms & 2.5" rear rake a-arms for 6" extra wheelbase w/ Stage 1 HD Tie Rods
-Got rid of those rough riding stock shocks with some Rough Country M1 shocks w/ adjustable 0-2" lift
-Wrapped in a brand-new set of 14" System 3 SB4 Bronze wheels w/ 31" MotoHammer tires from KJ Motorsports
-Topped off with a brand new KFI Winch and mount install and a rear cv axle replacement to Rhino 2.0 from Super ATV

Appreciate the business, Hunter Holsey!

Address

Dorchester, SC
29437

Telephone

+18433714845

Website

Alerts

Be the first to know and let us send you an email when Cowtail Outlaw Offroad Customs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Cowtail Outlaw Offroad Customs:

Shortcuts

Share

Category